parts for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

va3jco · 08-19-2005, 06:25 PM

i've got a 88 burb to part out no engine or trans, and the bidy is rough.
an 83 2wd half ton for parts, and a 81 2wd half ton for parts, also looking for parts for a 77 3/4 ton 4x4 would trade for stuff just sell or but what i need which is almost every thing. the burb was 4x4 and was fi i took the motor but not the wiring and have made the engine carbed, so some engine parts are lying around aswell.

HeavyD · 08-19-2005, 07:43 PM

Where are you located?

va3jco · 08-20-2005, 10:34 AM

i'm located in ontario about 1.5 hours from ottawa [west]

va3jco · 09-10-2005, 08:37 AM

the f/i 350 is available and the 700r4 as well with the transfer case it had 150,000km on it when i removed it the oil pressure is good and comp is 185 to 200 seemed to be a good runner and is complete, wiring harness manifolds starter, alt, a/c compressor, everything, have the diffs as well. will sell or trade for other parts i need or????

ronh72c10 · 09-10-2005, 09:51 AM

What's the frame on the Burb look like? And what would you want for the rolling burb chassis?

Ron

va3jco · 09-10-2005, 12:30 PM

the frame seems ok ron the rr springs are broke the main is fine though, would you wan't the body aswell or do you want it removed?? i guess the frame with the diffs would be worth around $300.00 let me know what you think that would include whats left of the body

ronh72c10 · 09-10-2005, 09:00 PM

What I'm after is a good solid frame (not scaley with rust, surface rust is ok) the front and rear axles (in good shape) and any of the steering and braking gear, such as the steering box, master cylinder, steering column, pedal assembly etc. I'm not interested so much in the body, but that might be the easiest way to get all of that.

The intention was to put this under a custom bodied 4x4, that's why I'm more interested in the frame than anything.

Ron

ronh72c10 · 09-10-2005, 09:09 PM

Was the Burb a 3/4 ton or 1/2 ton?

Ron

va3jco · 09-11-2005, 08:22 AM

ron the burb was 1/2 ton the frame is fairly clean for the year at first i was going to put a crew cab on it with a modified box but couldn't find a good cab, then i was going to use the motor trans and diffs for a truck project, then i found my 3/4 ton with a 400 sb and decided i didn't need the burb so i'm trying to sell it to get some money back out of it and maybe someone needs one, i was told the diffs were 4:11 i think the steering colum might be gone a local guy said he wants it but money talks let me know if this would be interesting to you, would trade it for a good th350 from a 4x4 if you know of one.

ronh72c10 · 09-11-2005, 09:25 AM

Actually I've got a TH350 and NP203 setup sitting in my shop, problem is that I have no idea of the shape of the TH350 as I got it from somebody else, it also doesn't have a torque converter.

Ron

va3jco · 09-11-2005, 03:56 PM

i have one with no forward gears left hoping to find a used one that works for now to avoid the rebuild bill for now, hoping to get mine rebuild in the spring to summer we'll see if that happens, thanks though, let me know if the frame still interests you. thanks jamie

ronh72c10 · 09-11-2005, 04:33 PM

Hi Jamie, I'm interested, but I'll have to hold off for the moment, if you still have it in a month or so then we'll talk again.

Ron

08-19-2005, 06:25 PM	#1
va3jco Registered User Join Date: Aug 2005 Location: canada Posts: 37	parts for sale i've got a 88 burb to part out no engine or trans, and the bidy is rough. an 83 2wd half ton for parts, and a 81 2wd half ton for parts, also looking for parts for a 77 3/4 ton 4x4 would trade for stuff just sell or but what i need which is almost every thing. the burb was 4x4 and was fi i took the motor but not the wiring and have made the engine carbed, so some engine parts are lying around aswell.

08-19-2005, 07:43 PM	#2
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Where are you located? __________________ "You can take the man out of PA, but you can't take PA out of the man"

09-10-2005, 09:51 AM	#5
ronh72c10 Senior Member Join Date: Jul 2003 Location: Mount Forest, Ontario, Canada Posts: 978	What's the frame on the Burb look like? And what would you want for the rolling burb chassis? Ron __________________ 72 Chevy C10 (rust repaired, starting body work) 72 GMC 3/4ton 4x4 72 Chevy C20 Suburban 38 Ford Tudor Humpback Sedan (from the darkside) 67 Pontiac Parisienne 55 Studebaker Commander 2dr Hardtop (Starliner) My Youtube channel with Video Updates!

09-10-2005, 09:00 PM	#7
ronh72c10 Senior Member Join Date: Jul 2003 Location: Mount Forest, Ontario, Canada Posts: 978	What I'm after is a good solid frame (not scaley with rust, surface rust is ok) the front and rear axles (in good shape) and any of the steering and braking gear, such as the steering box, master cylinder, steering column, pedal assembly etc. I'm not interested so much in the body, but that might be the easiest way to get all of that. The intention was to put this under a custom bodied 4x4, that's why I'm more interested in the frame than anything. Ron __________________ 72 Chevy C10 (rust repaired, starting body work) 72 GMC 3/4ton 4x4 72 Chevy C20 Suburban 38 Ford Tudor Humpback Sedan (from the darkside) 67 Pontiac Parisienne 55 Studebaker Commander 2dr Hardtop (Starliner) My Youtube channel with Video Updates!

09-10-2005, 09:09 PM	#8
ronh72c10 Senior Member Join Date: Jul 2003 Location: Mount Forest, Ontario, Canada Posts: 978	Was the Burb a 3/4 ton or 1/2 ton? Ron __________________ 72 Chevy C10 (rust repaired, starting body work) 72 GMC 3/4ton 4x4 72 Chevy C20 Suburban 38 Ford Tudor Humpback Sedan (from the darkside) 67 Pontiac Parisienne 55 Studebaker Commander 2dr Hardtop (Starliner) My Youtube channel with Video Updates!

08-20-2005, 10:34 AM	#3
va3jco Registered User Join Date: Aug 2005 Location: canada Posts: 37	i'm located in ontario about 1.5 hours from ottawa [west]

09-10-2005, 08:37 AM	#4
va3jco Registered User Join Date: Aug 2005 Location: canada Posts: 37	the f/i 350 is available and the 700r4 as well with the transfer case it had 150,000km on it when i removed it the oil pressure is good and comp is 185 to 200 seemed to be a good runner and is complete, wiring harness manifolds starter, alt, a/c compressor, everything, have the diffs as well. will sell or trade for other parts i need or????

09-10-2005, 12:30 PM	#6
va3jco Registered User Join Date: Aug 2005 Location: canada Posts: 37	the frame seems ok ron the rr springs are broke the main is fine though, would you wan't the body aswell or do you want it removed?? i guess the frame with the diffs would be worth around $300.00 let me know what you think that would include whats left of the body

09-11-2005, 08:22 AM	#9
va3jco Registered User Join Date: Aug 2005 Location: canada Posts: 37	ron the burb was 1/2 ton the frame is fairly clean for the year at first i was going to put a crew cab on it with a modified box but couldn't find a good cab, then i was going to use the motor trans and diffs for a truck project, then i found my 3/4 ton with a 400 sb and decided i didn't need the burb so i'm trying to sell it to get some money back out of it and maybe someone needs one, i was told the diffs were 4:11 i think the steering colum might be gone a local guy said he wants it but money talks let me know if this would be interesting to you, would trade it for a good th350 from a 4x4 if you know of one.

09-11-2005, 09:25 AM	#10
ronh72c10 Senior Member Join Date: Jul 2003 Location: Mount Forest, Ontario, Canada Posts: 978	Actually I've got a TH350 and NP203 setup sitting in my shop, problem is that I have no idea of the shape of the TH350 as I got it from somebody else, it also doesn't have a torque converter. Ron __________________ 72 Chevy C10 (rust repaired, starting body work) 72 GMC 3/4ton 4x4 72 Chevy C20 Suburban 38 Ford Tudor Humpback Sedan (from the darkside) 67 Pontiac Parisienne 55 Studebaker Commander 2dr Hardtop (Starliner) My Youtube channel with Video Updates!

09-11-2005, 03:56 PM	#11
va3jco Registered User Join Date: Aug 2005 Location: canada Posts: 37	i have one with no forward gears left hoping to find a used one that works for now to avoid the rebuild bill for now, hoping to get mine rebuild in the spring to summer we'll see if that happens, thanks though, let me know if the frame still interests you. thanks jamie

09-11-2005, 04:33 PM	#12
ronh72c10 Senior Member Join Date: Jul 2003 Location: Mount Forest, Ontario, Canada Posts: 978	Hi Jamie, I'm interested, but I'll have to hold off for the moment, if you still have it in a month or so then we'll talk again. Ron __________________ 72 Chevy C10 (rust repaired, starting body work) 72 GMC 3/4ton 4x4 72 Chevy C20 Suburban 38 Ford Tudor Humpback Sedan (from the darkside) 67 Pontiac Parisienne 55 Studebaker Commander 2dr Hardtop (Starliner) My Youtube channel with Video Updates!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.