4 door 3/4 ton & 1 ton trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bagged01extcab · 09-07-2005, 12:04 AM

I was going to build a tow pig, but ended up buying a new truck, so I'm going to sale all of my parts for this project. I have an 86 3/4 ton crew cab with power windows and locks, AC, 8 lug aluminum rims and NO motor or trans. The truck was originaly a 4 speed with tilt, but I traded a friend the clutch pedals and column for the same auto stuff. There is rust on the firewall that I didn't see when i bought the truck. I pulled the front clip and everything off the firewall to fix this, but didn't get around to it. When I went to buy the truck, it was running and being driven weekly. Everything worked except the the electric drivers side front window. I didn't want the tired small block, so I told him to keep it and the tranny. I have a clear Tx title for this truck. I also have a 8? 1 ton cab and chassis parts truck for sale. Most of the body is shot. I purchased this because it has 6 dually wheels, and all of the front suspension is there along with the cab and chassis rear end. It has a work bed on it, that is pretty rough also. I really need to sale these, so I'll take $600 for the pair. Trucks are located in Hallsville Tx. Here are some pics of the 3/4 ton!

chevykid77 · 09-07-2005, 01:41 PM

i would be interested in the 4-door truck how mutch for just that one and also if we could figure out a way to get it to central illinois...let me know if we can do this ...thanks

bagged01extcab · 09-07-2005, 08:54 PM

I'll take $500 for the blue one pictured adove, with a clear texas title. I'll help with loading or whatever, but I can't deliver it. You may check online for someone to transport it. I sold a 68 GTO a few years ago, and they found somebody online that transported it for them.

bagged01extcab · 09-09-2005, 11:25 PM

would also be interested in trades for possibly air ride parts, big block parts (mainly wanting billet dressup), tubular control arms, etc.... Shot me an email or pm and let me know what you might want to trade! I really need to get these gone from where they are!

bagged01extcab · 09-10-2005, 10:53 PM

I reinstalled the auto tilt column and the entire front clip today!

chevykid77 · 09-11-2005, 03:47 PM

im interested in the 4 door but you said on the post that you would take 600 for both of them so then i would just take both but the prob is im still trying to find a way to get them to illinois but im still working on it the best quote i have recieved so far is 1000.00 to move just one of them-so im not ignoring you if you have any ideas on a way let me know --thanks

bagged01extcab · 09-14-2005, 08:36 PM

I have yet to find a solution to get you the truck.

mitch184 · 09-15-2005, 01:11 AM

Hey, I was wondering if you shipping solution won't work out, if the rear leafs are still there and for sale.
thanks
sean

drpdblazer · 09-15-2005, 09:09 PM

hey ther am new here and wondering where hallsville isam in fort smith ar here

bagged01extcab · 09-15-2005, 09:36 PM

Hallsville, is located between Longview and Marshall Tx. It is about 40 miles west of Shreveport LA off of I-20.

crosby · 10-10-2005, 04:59 PM

is the 3/4 ton four wheel drive (still got it?) - thanks

bagged01extcab · 10-10-2005, 09:17 PM

Still got it, and it's 2wd!

halffast blazer · 11-05-2005, 09:21 PM

sold the 4-door yet? are you taking offers?

Litdave · 11-22-2005, 04:52 PM

Do you still have the...

"8? 1 ton cab and chassis parts truck for sale. Most of the body is shot. I purchased this because it has 6 dually wheels, and all of the front suspension is there along with the cab and chassis rear end. It has a work bed on it, that is pretty rough also"

...for sale? If so how much?

Litdave

09-07-2005, 12:04 AM	#1
bagged01extcab Registered User Join Date: Jun 2004 Location: Longview tx Posts: 270	4 door 3/4 ton & 1 ton trucks In North East Texas I was going to build a tow pig, but ended up buying a new truck, so I'm going to sale all of my parts for this project. I have an 86 3/4 ton crew cab with power windows and locks, AC, 8 lug aluminum rims and NO motor or trans. The truck was originaly a 4 speed with tilt, but I traded a friend the clutch pedals and column for the same auto stuff. There is rust on the firewall that I didn't see when i bought the truck. I pulled the front clip and everything off the firewall to fix this, but didn't get around to it. When I went to buy the truck, it was running and being driven weekly. Everything worked except the the electric drivers side front window. I didn't want the tired small block, so I told him to keep it and the tranny. I have a clear Tx title for this truck. I also have a 8? 1 ton cab and chassis parts truck for sale. Most of the body is shot. I purchased this because it has 6 dually wheels, and all of the front suspension is there along with the cab and chassis rear end. It has a work bed on it, that is pretty rough also. I really need to sale these, so I'll take $600 for the pair. Trucks are located in Hallsville Tx. Here are some pics of the 3/4 ton! __________________ Trey Oney Last edited by bagged01extcab; 09-07-2005 at 12:10 AM.

09-07-2005, 01:41 PM	#2
chevykid77 Registered User Join Date: Sep 2005 Location: Carpentersville illinois Posts: 34	i would be interested in the 4-door truck how mutch for just that one and also if we could figure out a way to get it to central illinois...let me know if we can do this ...thanks Last edited by chevykid77; 09-07-2005 at 01:41 PM.

09-07-2005, 08:54 PM	#3
bagged01extcab Registered User Join Date: Jun 2004 Location: Longview tx Posts: 270	I'll take $500 for the blue one pictured adove, with a clear texas title. I'll help with loading or whatever, but I can't deliver it. You may check online for someone to transport it. I sold a 68 GTO a few years ago, and they found somebody online that transported it for them. __________________ Trey Oney

09-09-2005, 11:25 PM	#4
bagged01extcab Registered User Join Date: Jun 2004 Location: Longview tx Posts: 270	would also be interested in trades for possibly air ride parts, big block parts (mainly wanting billet dressup), tubular control arms, etc.... Shot me an email or pm and let me know what you might want to trade! I really need to get these gone from where they are! __________________ Trey Oney

09-10-2005, 10:53 PM	#5
bagged01extcab Registered User Join Date: Jun 2004 Location: Longview tx Posts: 270	I reinstalled the auto tilt column and the entire front clip today! __________________ Trey Oney

09-11-2005, 03:47 PM	#6
chevykid77 Registered User Join Date: Sep 2005 Location: Carpentersville illinois Posts: 34	im interested in the 4 door but you said on the post that you would take 600 for both of them so then i would just take both but the prob is im still trying to find a way to get them to illinois but im still working on it the best quote i have recieved so far is 1000.00 to move just one of them-so im not ignoring you if you have any ideas on a way let me know --thanks

09-14-2005, 08:36 PM	#7
bagged01extcab Registered User Join Date: Jun 2004 Location: Longview tx Posts: 270	I have yet to find a solution to get you the truck. __________________ Trey Oney

09-15-2005, 01:11 AM	#8
mitch184 Registered User Join Date: Sep 2005 Location: Washington Posts: 2	Hey, I was wondering if you shipping solution won't work out, if the rear leafs are still there and for sale. thanks sean

09-15-2005, 09:09 PM	#9
drpdblazer Registered User Join Date: Sep 2005 Location: arkansas Posts: 7	hey ther am new here and wondering where hallsville isam in fort smith ar here

09-15-2005, 09:36 PM	#10
bagged01extcab Registered User Join Date: Jun 2004 Location: Longview tx Posts: 270	Hallsville, is located between Longview and Marshall Tx. It is about 40 miles west of Shreveport LA off of I-20. __________________ Trey Oney

10-10-2005, 04:59 PM	#11
crosby Registered User Join Date: Aug 2004 Location: New Hampshire Posts: 437	is the 3/4 ton four wheel drive (still got it?) - thanks __________________ Crosby 1978 Chevrolet K10 stepside NH

10-10-2005, 09:17 PM	#12
bagged01extcab Registered User Join Date: Jun 2004 Location: Longview tx Posts: 270	Still got it, and it's 2wd! __________________ Trey Oney

11-05-2005, 09:21 PM	#13
halffast blazer Registered User Join Date: Mar 2005 Location: Texarkana, TX Posts: 65	Re: 4 door 3/4 ton & 1 ton trucks sold the 4-door yet? are you taking offers?

11-22-2005, 04:52 PM	#14
Litdave Registered User Join Date: Feb 2002 Location: Tullahoma, TN Posts: 202	Re: 4 door 3/4 ton & 1 ton trucks Do you still have the... "8? 1 ton cab and chassis parts truck for sale. Most of the body is shot. I purchased this because it has 6 dually wheels, and all of the front suspension is there along with the cab and chassis rear end. It has a work bed on it, that is pretty rough also" ...for sale? If so how much? Litdave __________________ 71 Factory SWB 4x4 Project 383/350/205 69 LWB 2wd CST Daily Driver ZZ4/700r4/3.73 72 SWB Future Hot Rod



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.