What is this part called? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dion · 07-02-2002, 07:20 PM

The rubber gasket that fits inside the brace holding the shaft, the rubber is bad, the shaft moves around when I change gears? What's it called, Port shaft gasket? The white stuff is grease.

ebfabman · 07-02-2002, 07:23 PM

its called old and worn out, just like me......LOL!

ebfabman · 07-02-2002, 07:28 PM

OK really, It's a carrier bearing.

junkyardjohn · 07-02-2002, 07:34 PM

OR I'VE HEARD THEM REFERRED TO AS "MID SHIFT BEARINGS" OR "PROP SHAFT BEARINGS" (ALTHOUGH THERE NOT BEARINGS AT ALL??)

**COBALT** · 07-02-2002, 08:06 PM

Center Support Bearing. You need a new one.

WORNBRAKES · 07-02-2002, 08:10 PM

Type 1 drive shaft bearing. About $20-30, depending on where you buy it.

dion · 07-02-2002, 08:50 PM

Thanks guys, I'll call Napa.

Blue68 · 07-03-2002, 02:03 PM

In Classic Truckin last year (or so) there was a new products that showed a manufacturer that made a carrier bearing that used polyeurethane for the insulator. Can't remember the company name but I think they were out of Canada.

07-02-2002, 07:20 PM	#1
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	What is this part called? The rubber gasket that fits inside the brace holding the shaft, the rubber is bad, the shaft moves around when I change gears? What's it called, Port shaft gasket? The white stuff is grease. Attached Images __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

07-02-2002, 07:34 PM	#4
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	OR I'VE HEARD THEM REFERRED TO AS "MID SHIFT BEARINGS" OR "PROP SHAFT BEARINGS" (ALTHOUGH THERE NOT BEARINGS AT ALL??) __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

07-02-2002, 08:06 PM	#5
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Center Support Bearing. You need a new one. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

07-02-2002, 08:10 PM	#6
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	Type 1 drive shaft bearing. About $20-30, depending on where you buy it. __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

07-02-2002, 08:50 PM	#7
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	Thanks guys, I'll call Napa. __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

07-02-2002, 07:23 PM	#2
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,488	its called old and worn out, just like me......LOL!

07-02-2002, 07:28 PM	#3
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,488	OK really, It's a carrier bearing.

07-03-2002, 02:03 PM	#8
Blue68 Registered User Join Date: Apr 2000 Location: Frisco, Tx, USA Posts: 606	In Classic Truckin last year (or so) there was a new products that showed a manufacturer that made a carrier bearing that used polyeurethane for the insulator. Can't remember the company name but I think they were out of Canada. __________________ http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.