Video from yesterday on the way to work - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Yukon Jack** · 10-14-2005, 10:34 AM

Was on the way to work yesterday morning and couldn't resist getting some video of the truck accelerating. I used the camera strap to hold the camera, so don't worry, was being safe.

Now don't go laughing at the crappy steering wheel - I've got different one that will be installed at some point. And as for having both the 4 on the floor and the 3 on the tree shifter, well, haven't gotten around to yanking the old column in favor of the tilt that I have ready.

The first clip is larger but ya get to watch the tach. Gets a bit bouncy once I get into 4th gear.

Video file about 6 megs

Audio only MP3 file, much smaller

I now know I have a problem - I have found my self control is a bit lacking as I just can't keep my right foot off the go pedal

**tnblazerk5** · 10-14-2005, 11:12 AM

boy it sounds good

Putter · 10-14-2005, 11:34 AM

Those mudders start singing once you get up to speed, huh???

**Canadian694x4** · 10-14-2005, 12:47 PM

Wicked Man!!! Gotta Get Me A Big Block!!!

**1970 CST Short Wide** · 10-14-2005, 12:59 PM

I see you fixed the motor problem, now you have to work on that right foot
Isnâ€™t the torque of that BIG BLOCK a kick in the a$$.
How about some new picâ€™s, would like to see your progress

**Yukon Jack** · 10-14-2005, 02:53 PM

me have pics?

Just what I need, an excuse to post more pictures

**Yukon Jack** · 10-14-2005, 02:54 PM

And yes, the torque is something else - pretty addictive.

**1970 CST Short Wide** · 10-14-2005, 03:23 PM

Looking Good

67chevemall · 10-14-2005, 04:00 PM

very cool!

LUV2XCLR8 · 10-14-2005, 04:20 PM

Ole Blue 68 · 10-14-2005, 04:51 PM

I love that sound!

And looking at those new pics, I like your door panels. Did you do those yourself?

**Yukon Jack** · 10-14-2005, 05:14 PM

Yep, I used the old panels as templates and made the new panels from bathroom grade backing board. I then glued foam to the panels followed by the fabric that matches the seats.

Alexis · 10-14-2005, 05:20 PM

How about a clip from in front of the motor while reving it?

Sounds good. God I miss my 3/4ton.

1968GMC · 10-14-2005, 06:54 PM

that is funny as hell im glad your done with i. way to go bro. sounds real good. l had a smile on my face watching it, l wach it twice, way cool

llegos · 10-14-2005, 08:10 PM

haha, look at that steering wheel, and whats with the colum shifter???lol j/k

thats pretty cool, nice truck

llegos · 10-14-2005, 08:10 PM

gotta get that speedo working too....

**Yukon Jack** · 10-14-2005, 08:16 PM

The column shifter is to confuse the competition lol. As for the speedo, I keep thinking about whether to try to sell the mechanical and go with an electric - sure would make calibrating it easy if I go electric.

**BOSS** · 10-14-2005, 08:42 PM

Awesome!!!!!!!!!!

dion · 10-15-2005, 01:14 AM

Cool!

nitor · 10-16-2005, 05:41 AM

Quote:

Originally Posted by Yukon Jack

The column shifter is to confuse the competition lol. As for the speedo, I keep thinking about whether to try to sell the mechanical and go with an electric - sure would make calibrating it easy if I go electric.

What kind of gauges are those? I'm looking to replace my stock with something with numbers. I'm kinda liking Autometer Phamtom.

**Yukon Jack** · 10-16-2005, 10:43 AM

Those are the Phantom series.

BraveDave · 10-16-2005, 07:30 PM

what a crappy steering wheel.

*FormerMember* · 10-16-2005, 08:27 PM

So, where did you get the fabric that matches the seats?

I have a similiar pair sitting in my garage...

Striker169 · 10-17-2005, 12:05 AM

what seat is that?

MandarinSixSeven · 10-17-2005, 12:49 AM

Sounds like a freakin' Bansee man! That's awesome...how do you get to sound like that when you are going 0mph?

hehe.

I love videos.

10-14-2005, 10:34 AM	#1
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Video from yesterday on the way to work Was on the way to work yesterday morning and couldn't resist getting some video of the truck accelerating. I used the camera strap to hold the camera, so don't worry, was being safe. Now don't go laughing at the crappy steering wheel - I've got different one that will be installed at some point. And as for having both the 4 on the floor and the 3 on the tree shifter, well, haven't gotten around to yanking the old column in favor of the tilt that I have ready. The first clip is larger but ya get to watch the tach. Gets a bit bouncy once I get into 4th gear. Video file about 6 megs Audio only MP3 file, much smaller I now know I have a problem - I have found my self control is a bit lacking as I just can't keep my right foot off the go pedal __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 06-24-2010 at 12:24 PM.

10-14-2005, 11:34 AM	#3
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Those mudders start singing once you get up to speed, huh??? __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

10-14-2005, 12:47 PM	#4
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Wicked Man!!! Gotta Get Me A Big Block!!! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

10-14-2005, 12:59 PM	#5
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,200	I see you fixed the motor problem, now you have to work on that right foot Isnâ€™t the torque of that BIG BLOCK a kick in the a$$. How about some new picâ€™s, would like to see your progress __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

10-14-2005, 02:53 PM	#6
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	me have pics? Just what I need, an excuse to post more pictures __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 06-24-2010 at 12:24 PM.

10-14-2005, 11:12 AM	#2
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	boy it sounds good

10-14-2005, 02:54 PM	#7
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	And yes, the torque is something else - pretty addictive. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-14-2005, 03:23 PM	#8
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,200	Looking Good __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

10-14-2005, 04:00 PM	#9
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	very cool! __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

10-14-2005, 04:20 PM	#10
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	__________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-14-2005, 04:51 PM	#11
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	I love that sound! And looking at those new pics, I like your door panels. Did you do those yourself?

10-14-2005, 05:14 PM	#12
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Yep, I used the old panels as templates and made the new panels from bathroom grade backing board. I then glued foam to the panels followed by the fabric that matches the seats. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-14-2005, 05:20 PM	#13
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,874	How about a clip from in front of the motor while reving it? Sounds good. God I miss my 3/4ton.

10-14-2005, 06:54 PM	#14
1968GMC love my truck Join Date: May 2001 Location: aylmer QC Posts: 648	that is funny as hell im glad your done with i. way to go bro. sounds real good. l had a smile on my face watching it, l wach it twice, way cool

10-14-2005, 08:10 PM	#15
llegos Registered User Join Date: Aug 2005 Location: pleasanton, CA Posts: 570	haha, look at that steering wheel, and whats with the colum shifter???lol j/k thats pretty cool, nice truck __________________ -Steve



Register or Log In To remove these advertisements.

10-14-2005, 08:10 PM	#16
llegos Registered User Join Date: Aug 2005 Location: pleasanton, CA Posts: 570	gotta get that speedo working too.... __________________ -Steve

10-14-2005, 08:16 PM	#17
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	The column shifter is to confuse the competition lol. As for the speedo, I keep thinking about whether to try to sell the mechanical and go with an electric - sure would make calibrating it easy if I go electric. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-14-2005, 08:42 PM	#18
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	Awesome!!!!!!!!!! __________________ Support our site Norwood Survivor

10-15-2005, 01:14 AM	#19
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	Cool! __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

10-16-2005, 10:43 AM	#21
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Video from yesterday on the way to work Those are the Phantom series. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-16-2005, 07:30 PM	#22
BraveDave Registered User Join Date: Dec 2002 Location: Magnolia, Texas Posts: 336	Re: Video from yesterday on the way to work what a crappy steering wheel. __________________ '72 Chevy Cheyenne Super, '56 Chevy Bel Air,'56 Chevy Nomad, '61 Chevy Impala, '64 Cadillac Fleetwood, 1966 Thunderbird Convertible

10-16-2005, 08:27 PM	#23
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Video from yesterday on the way to work So, where did you get the fabric that matches the seats? I have a similiar pair sitting in my garage...

10-17-2005, 12:05 AM	#24
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Re: Video from yesterday on the way to work what seat is that?

10-17-2005, 12:49 AM	#25
MandarinSixSeven Seasonal Poster Join Date: Apr 2002 Location: Kelowna BC Canada Posts: 896	Re: Video from yesterday on the way to work Sounds like a freakin' Bansee man! That's awesome...how do you get to sound like that when you are going 0mph? hehe. I love videos. __________________ 67 GMC Short Step 350/4-Speed/3.08 Posi Front/Rear Sway Bars Kelowna BC, Canada Member of DTPW

Register or Log In To remove these advertisements.