|
10-22-2005, 09:21 PM
|
#1 |
|
Registered User
Join Date: Jan 2002
Location: WATAUGA,TX
Posts: 675
|
Bieng creative
I took my A-Arms off before I thought about taking the mounting shaft end nut off of the lower arms and I had to cut the ubolts to get the shaft off. So I had to get creative to get some weight on the arms so I had any chance of turning those nuts. Having my sons truck around sure did help.
__________________
72 2wd 307/AT/AC/TILT WHEEL 78 JIMMY HIGH SIERRA Last edited by 72BLAZERDUDE; 10-22-2005 at 09:26 PM. |
|
|
|
10-22-2005, 09:43 PM
|
#2 |
|
Registered User
Join Date: Nov 2003
Location: Alexandria, VA
Posts: 1,534
|
Re: Bieng creative
I had mine mounted in a huge vise and 1 3/8" socket and a 3/4" breaker bar to bust those stubborn bushings loose.
__________________
'72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.   
|
|
|
|
|
10-23-2005, 12:12 AM
|
#3 |
|
Senior Member
 
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,238
|
Re: Bieng creative
thats soudns liek sometyhing i do
|
|
|
|
|
10-23-2005, 06:56 AM
|
#4 |
|
Special Order
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: Bieng creative
Are you trying to lift the truck up or bust a nut loose?lol!
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
|
|
|
|
10-23-2005, 08:16 AM
|
#5 |
|
Registered User
Join Date: Nov 2003
Location: Alexandria, VA
Posts: 1,534
|
Re: Bieng creative
It's the backwoodsmans answer to a floor jack. lol
__________________
'72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.
|
|
|
|
|
10-23-2005, 08:24 AM
|
#6 |
|
Senior Member
Join Date: Apr 2005
Location: Joppa, Maryland
Posts: 4,408
|
Re: Bieng creative
Put a lock on it and you now have a new type "Denver Boot"......lol
good idea though.....
__________________
1997 GMC Sierra Ext 1965 Mustang |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
