Update on intermittent wiper switches - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Church · 11-14-2005, 10:48 PM

Just wanted to keep the board update on the intermittent switches.

20 of them are going to be ready to ship Dec 1st!

Click the link below to secure your order.

http://www.carolinaclassictrucks.com...wiper-kit.html

**John Fabris** · 11-15-2005, 12:35 AM

That looks pretty cool. Just wondering if I would be able to use my 67 wiper knob on your switch?

midyearvet@aol. · 11-15-2005, 01:35 AM

Will you sell the harness without the switch? I already bought a switch.
Thanks Rick

Church · 11-15-2005, 08:09 AM

Quote:

Originally Posted by midyearvet@aol.

Will you sell the harness without the switch? I already bought a switch.
Thanks Rick

I will see what we can do.

BubbaGreen · 11-15-2005, 08:24 AM

Will the original/factory knob fit the switch? So as to keep the original look?
Looks awesome.

Church · 11-15-2005, 10:09 AM

Absolutely. Simply use a 1/4" drill bit to enlarge the existing hole and the set-screw will hold it in place. This is also covered in the instructions.

Quote:

Originally Posted by John Fabris

That looks pretty cool. Just wondering if I would be able to use my 67 wiper knob on your switch?

Farm Boy · 11-15-2005, 10:55 AM

Church-

Is the switch intermittent with any speed you want between low and high? I ask this because the wording in your link

"New switch has slow and high speeds like factory switch as well as push for washer fluid."

Just wanting to make sure.

thanks

Putter · 11-15-2005, 10:57 AM

Quote:

Originally Posted by midyearvet@aol.

Will you sell the harness without the switch? I already bought a switch.
Thanks Rick

midyearvet@aol -
I PM'd you an answer to that question.

Putter · 11-15-2005, 11:00 AM

Farm Boy,
The switch has the following settings:
1) Intermittant....delay can be adjusted from roughly 13 seconds to 2 seconds between wipes
2) Low speed continuous wipes
3) High speed continuous wipes
4) Push to wash. Will deliver 3 additional wipes once buttons is released.

Farm Boy · 11-15-2005, 11:04 AM

thanks putter for the information I think I need one!

Church · 11-15-2005, 12:06 PM

Thanks Putter for clearing that up! We have updated the site with that info.

**hilljob26** · 11-15-2005, 06:57 PM

how about just a switch,i have wire,relays,and knowledge,i have been looking for a switch,but cant seem to find one

**John Fabris** · 11-15-2005, 09:13 PM

Just ordered mine. Thanks!!!

Church · 11-15-2005, 09:16 PM

Quote:

Originally Posted by John Fabris

Just ordered mine. Thanks!!!

Thank you John!!

Church · 11-15-2005, 09:31 PM

Quote:

Originally Posted by hilljob26

how about just a switch,i have wire,relays,and knowledge,i have been looking for a switch,but cant seem to find one

click the following link just for a switch.
https://www.carolinaclassictrucks.co...ash.html<br />

Here is the link just for the Intermittent Wiper Wiring Harness
https://www.carolinaclassictrucks.co...ash.html<br />

**Hart_Rod** · 11-15-2005, 11:58 PM

Does anyone know how to make this work with a late model switch that is on the column with the blinker/cruise? I have a 2 speed self parking wiper motor (newport engineering) and would like to be able to use the switch that is on the column. The column came out of a 90's Astro Van. Any help would be appreciated. Order being placed for one of the intermittent switches for my 1969 Suburban.

Rob

Putter · 11-16-2005, 11:42 AM

Hmmmmm. Rob, I will have to look into that. I have a spare switch similar to what you have pictured there (only mine is out of an Olds). I will see what all the wires go to and see what I can come up with.

Guardrail · 11-16-2005, 06:04 PM

I'd like to chime in here and say that I just recieved one of these kits from Putter and it looks to be top notch stuff. I think these kits are a smokin' good deal.

The benefit of having a modern feature like this is worth a lot-with my old 64' C10 it seemed like I was holding onto the wiper switch all the time when the weather was wet. It was a PITA! I wish I had had one of these kits back then. Nice going dude! I think the kit is *****in'........

Guardrail · 11-16-2005, 06:06 PM

BTW, See my other post on this subject.....http://67-72chevytrucks.com/vboard/s...d.php?t=180257

Putter · 11-17-2005, 10:30 AM

Thanks for the kind words.
Little does Guardrail know, that inside each switch is a microchip that is linked to a GPS navigational system. When he goes to sleep, his new wiper switch will connect to the ignition through the existing wiring harness, start the truck and drive itself to my house, where I will collect these trucks and force them to live with me and play COWBELL in my bovine choir....FOREVER!!!! Hahahahahahahaha (that was my evil laugh)

Guardrail · 11-17-2005, 11:15 AM

NNOOOOOO!!! I knew you were up to something evil The horse truck only plays country anyway.

Jayss109 · 11-18-2005, 05:27 PM

Odd question for ya, can I get a measurement from the base of the switch to the end of the shaft...I made my own dash, and even the stock switch is a little tight, wanna know if it will work!

Thanks!
Jason
________
Iolite condenser

Putter · 11-18-2005, 05:58 PM

To the end of the threaded portion is .48" (or just call it 1/2"), then another 1/2" of shaft that the knob attaches to.

The switch body is a 2.19" square (side to side & up/down)
And is 1.843" front to rear.

Jayss109 · 11-19-2005, 02:24 PM

Thank you, now I gotta pull mine out and take a measurement

Jason
________
Mflb Vaporizer

goldwing2000 · 11-19-2005, 02:33 PM

Quote:

Originally Posted by Hart_Rob

Does anyone know how to make this work with a late model switch that is on the column with the blinker/cruise? I have a 2 speed self parking wiper motor (newport engineering) and would like to be able to use the switch that is on the column. The column came out of a 90's Astro Van. Any help would be appreciated. Order being placed for one of the intermittent switches for my 1969 Suburban.

Rob

I'm interested in this for my '89 Blazer, too. Somebody has fiddled with the column and the intermittant doesn't work (if it was ever supposed to).

11-14-2005, 10:48 PM	#1
Church Carolina Classic Trucks Join Date: Jan 2000 Location: The South Posts: 792	Update on intermittent wiper switches Just wanted to keep the board update on the intermittent switches. 20 of them are going to be ready to ship Dec 1st! Click the link below to secure your order. http://www.carolinaclassictrucks.com...wiper-kit.html __________________

11-15-2005, 12:35 AM	#2
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: Update on intermittent wiper switches That looks pretty cool. Just wondering if I would be able to use my 67 wiper knob on your switch? __________________ John Fabris 67 C10 SWB

11-15-2005, 01:35 AM	#3
midyearvet@aol. Registered User Join Date: Jun 2003 Location: Napa, Ca. Posts: 103	Re: Update on intermittent wiper switches Will you sell the harness without the switch? I already bought a switch. Thanks Rick

11-15-2005, 08:24 AM	#5
BubbaGreen Senior Member Join Date: Mar 2001 Location: Cedar Park, TX Posts: 686	Re: Update on intermittent wiper switches Will the original/factory knob fit the switch? So as to keep the original look? Looks awesome. __________________ 71 Chevy C-10 SWB Fleetside RamJet-350/4L60e & Compushift/3.73Posi See it at www.prismnet.com/~grzanich

11-15-2005, 10:55 AM	#7
Farm Boy Registered User Join Date: Mar 2000 Location: Alder, MT 59710 Posts: 488	Re: Update on intermittent wiper switches Church- Is the switch intermittent with any speed you want between low and high? I ask this because the wording in your link "New switch has slow and high speeds like factory switch as well as push for washer fluid." Just wanting to make sure. thanks __________________ WWS!!!!! 1971 Custom C/20 1992 Chevrolet Z71 1993 Jeep Grand Cherokee 1984 Chevrolet Celebrity (All old but long ago paid for)

11-15-2005, 11:00 AM	#9
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Update on intermittent wiper switches Farm Boy, The switch has the following settings: 1) Intermittant....delay can be adjusted from roughly 13 seconds to 2 seconds between wipes 2) Low speed continuous wipes 3) High speed continuous wipes 4) Push to wash. Will deliver 3 additional wipes once buttons is released. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 11-15-2005 at 11:02 AM.

11-15-2005, 11:04 AM	#10
Farm Boy Registered User Join Date: Mar 2000 Location: Alder, MT 59710 Posts: 488	Re: Update on intermittent wiper switches thanks putter for the information I think I need one! __________________ WWS!!!!! 1971 Custom C/20 1992 Chevrolet Z71 1993 Jeep Grand Cherokee 1984 Chevrolet Celebrity (All old but long ago paid for)

11-15-2005, 12:06 PM	#11
Church Carolina Classic Trucks Join Date: Jan 2000 Location: The South Posts: 792	Re: Update on intermittent wiper switches Thanks Putter for clearing that up! We have updated the site with that info. __________________

11-15-2005, 06:57 PM	#12
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	Re: Update on intermittent wiper switches how about just a switch,i have wire,relays,and knowledge,i have been looking for a switch,but cant seem to find one __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

11-15-2005, 09:13 PM	#13
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: Update on intermittent wiper switches Just ordered mine. Thanks!!! __________________ John Fabris 67 C10 SWB

11-15-2005, 11:58 PM	#16
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,863	Re: Update on intermittent wiper switches Does anyone know how to make this work with a late model switch that is on the column with the blinker/cruise? I have a 2 speed self parking wiper motor (newport engineering) and would like to be able to use the switch that is on the column. The column came out of a 90's Astro Van. Any help would be appreciated. Order being placed for one of the intermittent switches for my 1969 Suburban. Rob Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

11-16-2005, 11:42 AM	#17
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Update on intermittent wiper switches Hmmmmm. Rob, I will have to look into that. I have a spare switch similar to what you have pictured there (only mine is out of an Olds). I will see what all the wires go to and see what I can come up with. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

11-16-2005, 06:04 PM	#18
Guardrail And Don't Call Me Shirley Join Date: Oct 2005 Location: Cameron Park, CA Posts: 115	Re: Update on intermittent wiper switches I'd like to chime in here and say that I just recieved one of these kits from Putter and it looks to be top notch stuff. I think these kits are a smokin' good deal. The benefit of having a modern feature like this is worth a lot-with my old 64' C10 it seemed like I was holding onto the wiper switch all the time when the weather was wet. It was a PITA! I wish I had had one of these kits back then. Nice going dude! I think the kit is *****in'........ __________________ Rick Tucker 1969 C20/Custom Camper (the Green Machine)Sold 1970 GMC 4000 COE (future Ramp Truck) 1972 K10 Longbed (restoration begins June 2020)

11-16-2005, 06:06 PM	#19
Guardrail And Don't Call Me Shirley Join Date: Oct 2005 Location: Cameron Park, CA Posts: 115	Re: Update on intermittent wiper switches BTW, See my other post on this subject.....http://67-72chevytrucks.com/vboard/s...d.php?t=180257 __________________ Rick Tucker 1969 C20/Custom Camper (the Green Machine)Sold 1970 GMC 4000 COE (future Ramp Truck) 1972 K10 Longbed (restoration begins June 2020)

11-17-2005, 10:30 AM	#20
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Update on intermittent wiper switches Thanks for the kind words. Little does Guardrail know, that inside each switch is a microchip that is linked to a GPS navigational system. When he goes to sleep, his new wiper switch will connect to the ignition through the existing wiring harness, start the truck and drive itself to my house, where I will collect these trucks and force them to live with me and play COWBELL in my bovine choir....FOREVER!!!! Hahahahahahahaha (that was my evil laugh) __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 11-17-2005 at 10:31 AM.



Register or Log In To remove these advertisements.

11-17-2005, 11:15 AM	#21
Guardrail And Don't Call Me Shirley Join Date: Oct 2005 Location: Cameron Park, CA Posts: 115	Re: Update on intermittent wiper switches NNOOOOOO!!! I knew you were up to something evil The horse truck only plays country anyway. __________________ Rick Tucker 1969 C20/Custom Camper (the Green Machine)Sold 1970 GMC 4000 COE (future Ramp Truck) 1972 K10 Longbed (restoration begins June 2020)

11-18-2005, 05:27 PM	#22
Jayss109 Active Member Join Date: May 2005 Location: San Jose, CA Posts: 235	Re: Update on intermittent wiper switches Odd question for ya, can I get a measurement from the base of the switch to the end of the shaft...I made my own dash, and even the stock switch is a little tight, wanna know if it will work! Thanks! Jason ________ Iolite condenser Last edited by Jayss109; 04-27-2011 at 11:32 PM.

11-18-2005, 05:58 PM	#23
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Update on intermittent wiper switches To the end of the threaded portion is .48" (or just call it 1/2"), then another 1/2" of shaft that the knob attaches to. The switch body is a 2.19" square (side to side & up/down) And is 1.843" front to rear. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 11-18-2005 at 06:00 PM.

11-19-2005, 02:24 PM	#24
Jayss109 Active Member Join Date: May 2005 Location: San Jose, CA Posts: 235	Re: Update on intermittent wiper switches Thank you, now I gotta pull mine out and take a measurement Jason ________ Mflb Vaporizer Last edited by Jayss109; 04-27-2011 at 11:32 PM.

Register or Log In To remove these advertisements.