???Best source for Window Channel Trim&Felt? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LOHRTBT · 11-21-2005, 10:58 AM

Where do you all recommend getting this?? i need it for my truck, its all dried up and chipped out and looks like trash. So....time to replace it.

not to mention it sounds like the window is open when I am driving lol.

Izzy · 11-21-2005, 11:06 AM

Dealer. PM Mark on FSC, he works at a GM parts counter.

**Captkaos** · 11-21-2005, 11:51 AM

Yep, GM if they have it.

LOHRTBT · 11-21-2005, 01:27 PM

Cool...just wasnt sure if GM still had it or not. I have a buddy in the parts Dept at the local dealer...so he should be able to hook me up!

Dont wanna scratch up the new tint.

TEAM THC · 11-21-2005, 01:36 PM

Try Lmc Online At Lmctruck.com Seems Like They Have Just About Everything For Our Trucks.

79BIG10 · 11-21-2005, 10:10 PM

Dave let me know who you get yours from. I need some myself.

**Captkaos** · 11-23-2005, 12:40 PM

Forgot to mention that I also have these to, just not listed in the catalog yet. They are from Goodmark.

For 81-91 ( typically $10 extra on 73-80's)
4 Inner/outer (enough for 2 doors) window felts are $73.95
Sash channel is $19.95 per side

I also have 81 -91 ( typically $10 extra on 73-80's PM if you are curious) Weatherstrip Kits - each kit contains door weatherstrips, vent window weatherstrips, front and rear window gaskets, and door glass window channel kit, the cost is $369.95 for no chrome strip and $385.95 for chrome strip.

86swb · 11-23-2005, 05:06 PM

Goodmark makes these now? Thought all they did was hoods ect.

75stepside · 11-23-2005, 07:37 PM

i replaced every piece of felt or rubber for my doors with stuff from Chevy Duty. i think i got most all of it from there due to the price... quality stuff!

86swb · 11-23-2005, 10:00 PM

Did that take care of all that wind noise? Was it very hard to do?

79Silv4x4 · 11-23-2005, 11:25 PM

Quote:

Originally Posted by 86swb

Did that take care of all that wind noise? Was it very hard to do?

I don't think it's possible to get rid of all of the wind noise--just a characterisitic of our trucks.

86swb · 11-24-2005, 12:29 AM

So you are saying these trucks came from the factory with wind noise? Surely not.

**Captkaos** · 11-28-2005, 04:40 PM

Quote:

Originally Posted by 86swb

Goodmark makes these now? Thought all they did was hoods ect.

Goodmark doesn't make them, they just supply me with them.

LOHRTBT · 11-28-2005, 11:15 PM

I had finally gotten all the wind noise out of my old truck. Its not that bad. Just good window felt and such and I took black silicone and opened the wing window and coated all around it, shut it over night, let it dry..cut it out with a razor knife just enough to reopen the new seal I had created. WOrked great.

79BIG10 · 11-28-2005, 11:18 PM

Sounds like you found a new way to seal it up Dave. So the felt you found was good? Did they have have rubber for the door seal as well?

Is it me or did GM short everybody on the door seal? Mine is always coming down from the metal lip at the back curve on the door.

LOHRTBT · 11-29-2005, 04:25 PM

I havent ordered yet B man..I might this week and I will let ya know.

Moostifer · 11-29-2005, 05:20 PM

Quote:

Originally Posted by 79BIG10

Is it me or did GM short everybody on the door seal? Mine is always coming down from the metal lip at the back curve on the door.

no kidding! I had some extra RTV cilicone.... squirted it up there & taped it up until it dried.... hasn't come down since.

79Silv4x4 · 11-29-2005, 09:01 PM

Quote:

Originally Posted by 86swb

So you are saying these trucks came from the factory with wind noise? Surely not.

Not what I said but. I've known people who purchased these trucks new and NEVER cracked the vent windows and they still developed wind noise--that's what I was referring to. It CAN be fixed but sometimes it can be a real PIA.
Rob

freightdriver · 12-02-2005, 06:29 PM

bought mine from lmc the fit seems fine and i'm not getting any windnoise other then from my rear window which needs new felts

82 Silverado 4X · 12-03-2005, 01:46 AM

Just installed inner and outer beltline weatherstrips, window channels and door rubbers on my 82 with ones I bought at Chevyduty. All worked perfectly and in fact I had an extra 2-3 inches of door rubber on both doors that needed to be cut off. My only 2 complaints with them was the 2 long carriage bolts that came in their bed bolt kit were a 1/2" too short and they don't carry longer ones. They need to be 10 1/2" long and they were only 10". The other thing was they sell bed to frame pads to be installed between the bed and the frame. If you install them, your bed will sit too high and the body line will be off by 1/4".

11-21-2005, 10:58 AM	#1
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	???Best source for Window Channel Trim&Felt? Where do you all recommend getting this?? i need it for my truck, its all dried up and chipped out and looks like trash. So....time to replace it. not to mention it sounds like the window is open when I am driving lol. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

11-21-2005, 11:06 AM	#2
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	Re: ???Best source for Window Channel Trim&Felt? Dealer. PM Mark on FSC, he works at a GM parts counter. Last edited by Izzy; 11-21-2005 at 11:06 AM.

11-21-2005, 11:51 AM	#3
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: ???Best source for Window Channel Trim&Felt? Yep, GM if they have it. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

11-21-2005, 01:27 PM	#4
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Re: ???Best source for Window Channel Trim&Felt? Cool...just wasnt sure if GM still had it or not. I have a buddy in the parts Dept at the local dealer...so he should be able to hook me up! Dont wanna scratch up the new tint. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

11-21-2005, 01:36 PM	#5
TEAM THC CUSTOM CHEVY FIEND Join Date: Jul 2005 Location: CHICO CA Posts: 227	Re: ???Best source for Window Channel Trim&Felt? Try Lmc Online At Lmctruck.com Seems Like They Have Just About Everything For Our Trucks.

11-21-2005, 10:10 PM	#6
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Re: ???Best source for Window Channel Trim&Felt? Dave let me know who you get yours from. I need some myself. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

11-23-2005, 12:40 PM	#7
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: ???Best source for Window Channel Trim&Felt? Forgot to mention that I also have these to, just not listed in the catalog yet. They are from Goodmark. For 81-91 ( typically $10 extra on 73-80's) 4 Inner/outer (enough for 2 doors) window felts are $73.95 Sash channel is $19.95 per side I also have 81 -91 ( typically $10 extra on 73-80's PM if you are curious) Weatherstrip Kits - each kit contains door weatherstrips, vent window weatherstrips, front and rear window gaskets, and door glass window channel kit, the cost is $369.95 for no chrome strip and $385.95 for chrome strip. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

11-23-2005, 05:06 PM	#8
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Re: ???Best source for Window Channel Trim&Felt? Goodmark makes these now? Thought all they did was hoods ect. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

11-23-2005, 07:37 PM	#9
75stepside Proud Member Join Date: Nov 2002 Location: Pittsburgh, PA Posts: 741	Re: ???Best source for Window Channel Trim&Felt? i replaced every piece of felt or rubber for my doors with stuff from Chevy Duty. i think i got most all of it from there due to the price... quality stuff!

11-23-2005, 10:00 PM	#10
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Re: ???Best source for Window Channel Trim&Felt? Did that take care of all that wind noise? Was it very hard to do? __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

11-24-2005, 12:29 AM	#12
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Re: ???Best source for Window Channel Trim&Felt? So you are saying these trucks came from the factory with wind noise? Surely not. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

11-28-2005, 11:15 PM	#14
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Re: ???Best source for Window Channel Trim&Felt? I had finally gotten all the wind noise out of my old truck. Its not that bad. Just good window felt and such and I took black silicone and opened the wing window and coated all around it, shut it over night, let it dry..cut it out with a razor knife just enough to reopen the new seal I had created. WOrked great. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

11-28-2005, 11:18 PM	#15
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Re: ???Best source for Window Channel Trim&Felt? Sounds like you found a new way to seal it up Dave. So the felt you found was good? Did they have have rubber for the door seal as well? Is it me or did GM short everybody on the door seal? Mine is always coming down from the metal lip at the back curve on the door. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

11-29-2005, 04:25 PM	#16
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Re: ???Best source for Window Channel Trim&Felt? I havent ordered yet B man..I might this week and I will let ya know. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

12-02-2005, 06:29 PM	#19
freightdriver Registered User Join Date: Jan 2004 Location: oakdale,ca Posts: 51	Re: ???Best source for Window Channel Trim&Felt? bought mine from lmc the fit seems fine and i'm not getting any windnoise other then from my rear window which needs new felts



Register or Log In To remove these advertisements.

12-03-2005, 01:46 AM	#20
82 Silverado 4X Genuine Chevrolet Join Date: Feb 2003 Location: South West Pennsylvania. Posts: 582	Re: ???Best source for Window Channel Trim&Felt? Just installed inner and outer beltline weatherstrips, window channels and door rubbers on my 82 with ones I bought at Chevyduty. All worked perfectly and in fact I had an extra 2-3 inches of door rubber on both doors that needed to be cut off. My only 2 complaints with them was the 2 long carriage bolts that came in their bed bolt kit were a 1/2" too short and they don't carry longer ones. They need to be 10 1/2" long and they were only 10". The other thing was they sell bed to frame pads to be installed between the bed and the frame. If you install them, your bed will sit too high and the body line will be off by 1/4". __________________ George 82 Silverado LWB 4x4 350 SM465 NP208 77 Chevrolet Blazer Chalet 400 TH350 NP203

Register or Log In To remove these advertisements.