Hood Swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mikes71 · 11-30-2005, 09:59 PM

I have a quick question. Can you swap a 68 hood on to a 71 C10? Are they the same hood?

Thanks!
Mike

jsbgump · 11-30-2005, 11:12 PM

The hood is actually differnt. The 67-68 have more of a slope to the front of the hood while 69-72 are more square. The hood latch is also diffen't I believe.

**Palf70Step** · 12-01-2005, 06:36 AM

Just the hood, no not really. Because of the difference in the slope you'll need a 67-68 core support, fenders, and latch assembly.

sneakysnake · 12-01-2005, 10:51 AM

In case you mised this thread.
http://67-72chevytrucks.com/vboard/s...d.php?t=181538

Frizzle Fry · 12-01-2005, 03:28 PM

Not a bolt on but it can be done with fab skills:

crazy longhorn · 12-01-2005, 05:37 PM

D@mmit! My hood is welded to my fenders.....then I see a cool mod....it sounds like the die grinder may get a little "exercize"

that is one of the slickest mods I have seen.......I love that grill on the 69-70, or 71-72....but that slope on the older hood really makes it

L

11-30-2005, 09:59 PM	#1
Mikes71 Registered User Join Date: Nov 2005 Location: Lasalle, CO Posts: 38	Hood Swap I have a quick question. Can you swap a 68 hood on to a 71 C10? Are they the same hood? Thanks! Mike

11-30-2005, 11:12 PM	#2
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Hood Swap The hood is actually differnt. The 67-68 have more of a slope to the front of the hood while 69-72 are more square. The hood latch is also diffen't I believe. __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

12-01-2005, 06:36 AM	#3
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,322	Re: Hood Swap Just the hood, no not really. Because of the difference in the slope you'll need a 67-68 core support, fenders, and latch assembly. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

12-01-2005, 10:51 AM	#4
sneakysnake It's a catastrophic success. Join Date: Jan 2003 Location: Oklahoma Posts: 2,077	Re: Hood Swap In case you mised this thread. http://67-72chevytrucks.com/vboard/s...d.php?t=181538

12-01-2005, 03:28 PM	#5
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Hood Swap Not a bolt on but it can be done with fab skills: Attached Images

12-01-2005, 05:37 PM	#6
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	Re: Hood Swap D@mmit! My hood is welded to my fenders.....then I see a cool mod....it sounds like the die grinder may get a little "exercize" that is one of the slickest mods I have seen.......I love that grill on the 69-70, or 71-72....but that slope on the older hood really makes it L __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.