|
12-31-2005, 06:05 PM
|
#1 |
|
Just here to help
 
Join Date: Jan 2002
Location: Norwood,Mo
Posts: 3,890
|
Brake grabbing
Hey guys first of all i wish everyone a very Happy New Years!!!ow on to my problem,about a month ago i installed a new booster and new shoes.about three days ago i noticed my brakes grabbing every once in awhile.sometimes the pedal is way up top(this is when they grab) but most of the time they are down low,any ideas what i need to change next?it sure would be nice to be able to have normal brakes on this beast.
|
|
|
|
12-31-2005, 06:14 PM
|
#2 |
|
Franko72
Join Date: May 2004
Location: Cincinnati,Ohio
Posts: 471
|
Re: Brake grabbing
check for leaking wheel cylinders.Fluid can get onto the drum and cause them to grab or lock up.
__________________
 1972 C20 cheyenne Super 402 BB/400 turbo LWB A/C Tilt, Cruise Control, Saddle tanks, Tach My Home Page Better to burn out than it is to rust |
|
|
|
|
12-31-2005, 06:22 PM
|
#3 |
|
Just here to help
Join Date: Jan 2002
Location: Norwood,Mo
Posts: 3,890
|
Re: Brake grabbing
thanx i will look for that also,i have not noticed any leaks so far.also i did notice when i changed the shoes that the driver front caliper did have the holes kind of rounded,could that be anything?
|
|
|
|
|
12-31-2005, 08:05 PM
|
#4 |
|
Registered User
Join Date: May 2004
Location: Topeka, Ks
Posts: 2,293
|
Re: Brake grabbing
Make sure your brake hose's aren't pluged internaly. Pretty common on these old trucks.
__________________
I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
