Some odds and ends - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bighead · 01-24-2006, 06:56 PM

Need to recoop some of the gas money I spent going to purs's place in Abilene yesterday. Most of this stuff is not cost effective to ship. Here goes:
Not pictured: Three complete 6 lug coil rears, one is a 3.73 the other? $40 each

72 A/C dash, not cut at radio, nice speaker grill. I tried to be gentle removing it. $75

A/C housing and a couple of under dash parts. $25

Left side cab and door trim, driver quality $20

Rt side trim, driver quality $10

A pair of '415 heads. Straight from a junkyard engine. $20, if there not rebuildable I'll refund your money.

Two 6 lug wheels with some Goodyear mud type tires with enough tread to pass inspection easily. $30

Two 6 lug wheels with tires barely good enough to roll your project around on $15

Right front fender straight but rusted out in front bottom Has decent driver quality emblem, spear, and bottom trim. Also included is slightly tweeked but usable spear from left side. $30

I'm looking for a few things for my 67 and 69 c10's. I'll buy or trade for a pair of nice rust free speaker free doors, TH400 to column linkage, and TH400 tailshaft stuff to convert the bolt on yoke to a slip yoke, etc. Let me know what you might have.

LUV2XCLR8 · 01-24-2006, 07:21 PM

I'd be all over the gate if you were closer

noahdallas · 01-24-2006, 09:53 PM

I am interested in the tailgate. Could you tell me where about you are? I live in Dallas.

bighead · 01-24-2006, 10:11 PM

McKinney/Melissa, 25 miles north of 635/75.

noahdallas · 01-24-2006, 10:18 PM

Is saturday to late to try to pick up the tailgate?

I am logging off for today...please pm with info needed if I can pickup the tailgate this weekend if not to late? thanks...

bighead · 01-24-2006, 10:40 PM

Saturday evening is fine. I work at the corner of 635 and 75 thurs-sat this week. I could meet you in that area after work and save you a little drive.

thejoker · 01-24-2006, 11:33 PM

I'm interested in the heads. Can you get the casting numbers and a shipping qoute to 39503? Cheapest shipping please.

JKR

bighead · 01-25-2006, 09:17 AM

Joker, not to put you off but these are just plain jane small valve heads, 415 casting number. Last time I shipped a pair it cost around $70. I suspect you could do better closer to home and save some money. Let me know if you are sure you want them and I'll get a real quote for you.

bighead · 01-25-2006, 06:01 PM

Tailgate deal pending

bean · 01-25-2006, 07:17 PM

Interested in atleast one of the wheels. Will have to work out my schedule at work first to get one.

bighead · 01-25-2006, 07:37 PM

Let me know when you can come out. Where are you from Bean?

bean · 01-25-2006, 07:38 PM

i'm just in fort worth.

noahdallas · 01-25-2006, 07:47 PM

bighead....I am ready to pickup the tailgate on saturday but I also wanted ask you if you had a clean cheap gas tank for a 69? Mine is rusted inside and out. Any help would be appreciated.

bighead · 01-25-2006, 07:55 PM

Is free cheap enough noahdallas? I can't bring it to you though. Guards at the gate at work wouldn't be pleased. Any evening this week or I'm off Sunday. Want more than 1?

noahdallas · 01-25-2006, 08:02 PM

I need a gas tank for my truck.....or are you talking about a gas can for a lawnmower? Please be talking about for a truck...please..

bighead · 01-25-2006, 08:08 PM

I've got three from junked cabs. They are free but you'll have to pick up. You can look and see which you prefer before you take. They probably have some gas/varnish residue in them which you may not pour out at my place.

noahdallas · 01-25-2006, 08:13 PM

Cool... I will gladley go pick one up. Would sunday be ok? Do you think any are rusted on the inside? Can I call you on sunday morning to get directions? Or would a friday/saturday night be out of the question? thanks...

bighead · 01-25-2006, 09:10 PM

PM sent

bighead · 01-27-2006, 10:56 PM

bump

al's71gmc · 01-28-2006, 05:08 AM

What would shipping be on the driver door trim? 89316
Al

72swbcamo · 01-28-2006, 10:25 AM

I'm interested in the A/C parts can you figure the shipping to 06705?

bighead · 01-28-2006, 11:04 AM

I'm at work today. I'll get the shipping figured tonight and post it up. Thanks, bighead

bighead · 01-29-2006, 06:05 PM

72 SWBcamo, The UPS calculator is showing about $30 shipping. Seems kind of high to me. Let me know if you want to do it.

Al's71, I think I mis spoke on the trim. I think the long piece is from the bed in front of the wheel on a lwb. thanks, bighead

AKChevyman · 01-30-2006, 12:08 AM

I maybe intrested in the AC dash if you don't mind shipping it. my zip is 83647

01-24-2006, 06:56 PM	#1
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Some odds and ends Need to recoop some of the gas money I spent going to purs's place in Abilene yesterday. Most of this stuff is not cost effective to ship. Here goes: Not pictured: Three complete 6 lug coil rears, one is a 3.73 the other? $40 each 72 A/C dash, not cut at radio, nice speaker grill. I tried to be gentle removing it. $75 A/C housing and a couple of under dash parts. $25 Left side cab and door trim, driver quality $20 Rt side trim, driver quality $10 A pair of '415 heads. Straight from a junkyard engine. $20, if there not rebuildable I'll refund your money. Two 6 lug wheels with some Goodyear mud type tires with enough tread to pass inspection easily. $30 Two 6 lug wheels with tires barely good enough to roll your project around on $15 Right front fender straight but rusted out in front bottom Has decent driver quality emblem, spear, and bottom trim. Also included is slightly tweeked but usable spear from left side. $30 I'm looking for a few things for my 67 and 69 c10's. I'll buy or trade for a pair of nice rust free speaker free doors, TH400 to column linkage, and TH400 tailshaft stuff to convert the bolt on yoke to a slip yoke, etc. Let me know what you might have. Last edited by bighead; 01-29-2006 at 06:08 PM.

01-24-2006, 07:21 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Some odds and ends I'd be all over the gate if you were closer __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

01-24-2006, 09:53 PM	#3
noahdallas Registered User Join Date: Jul 2005 Location: Dallas, TX Posts: 324	Re: Some odds and ends I am interested in the tailgate. Could you tell me where about you are? I live in Dallas.

01-24-2006, 10:11 PM	#4
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Some odds and ends McKinney/Melissa, 25 miles north of 635/75.

01-24-2006, 10:18 PM	#5
noahdallas Registered User Join Date: Jul 2005 Location: Dallas, TX Posts: 324	Re: Some odds and ends Is saturday to late to try to pick up the tailgate? I am logging off for today...please pm with info needed if I can pickup the tailgate this weekend if not to late? thanks... Last edited by noahdallas; 01-24-2006 at 10:28 PM.

01-24-2006, 10:40 PM	#6
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Some odds and ends Saturday evening is fine. I work at the corner of 635 and 75 thurs-sat this week. I could meet you in that area after work and save you a little drive.

01-24-2006, 11:33 PM	#7
thejoker Registered User Join Date: Jun 2005 Location: Gulfport Mississippi Posts: 364	Re: Some odds and ends I'm interested in the heads. Can you get the casting numbers and a shipping qoute to 39503? Cheapest shipping please. JKR __________________ **Have you ever danced with the devil in the pale moonlight....I ask that of all my prey** 68' C10 Short Step (rebuilding as we speak) 72' Custom Camper (wrecked, parting out) 79' C10 Fleet (rough, parting out) 97' C1500 Short Step Custom (DD) 97' Kawaski VN800a Customized 99' Z71 Silverado 04' Suzuki Volusia

01-25-2006, 09:17 AM	#8
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Some odds and ends Joker, not to put you off but these are just plain jane small valve heads, 415 casting number. Last time I shipped a pair it cost around $70. I suspect you could do better closer to home and save some money. Let me know if you are sure you want them and I'll get a real quote for you.

01-25-2006, 06:01 PM	#9
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Some odds and ends Tailgate deal pending

01-25-2006, 07:17 PM	#10
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 920	Re: Some odds and ends Interested in atleast one of the wheels. Will have to work out my schedule at work first to get one.

01-25-2006, 07:37 PM	#11
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Some odds and ends Let me know when you can come out. Where are you from Bean?

01-25-2006, 07:38 PM	#12
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 920	Re: Some odds and ends i'm just in fort worth.

01-25-2006, 07:47 PM	#13
noahdallas Registered User Join Date: Jul 2005 Location: Dallas, TX Posts: 324	Re: Some odds and ends bighead....I am ready to pickup the tailgate on saturday but I also wanted ask you if you had a clean cheap gas tank for a 69? Mine is rusted inside and out. Any help would be appreciated.

01-25-2006, 07:55 PM	#14
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Some odds and ends Is free cheap enough noahdallas? I can't bring it to you though. Guards at the gate at work wouldn't be pleased. Any evening this week or I'm off Sunday. Want more than 1?

01-25-2006, 08:02 PM	#15
noahdallas Registered User Join Date: Jul 2005 Location: Dallas, TX Posts: 324	Re: Some odds and ends I need a gas tank for my truck.....or are you talking about a gas can for a lawnmower? Please be talking about for a truck...please..



Register or Log In To remove these advertisements.

01-25-2006, 08:08 PM	#16
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Some odds and ends I've got three from junked cabs. They are free but you'll have to pick up. You can look and see which you prefer before you take. They probably have some gas/varnish residue in them which you may not pour out at my place.

01-25-2006, 08:13 PM	#17
noahdallas Registered User Join Date: Jul 2005 Location: Dallas, TX Posts: 324	Re: Some odds and ends Cool... I will gladley go pick one up. Would sunday be ok? Do you think any are rusted on the inside? Can I call you on sunday morning to get directions? Or would a friday/saturday night be out of the question? thanks...

01-25-2006, 09:10 PM	#18
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Some odds and ends PM sent

01-27-2006, 10:56 PM	#19
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Some odds and ends bump

01-28-2006, 05:08 AM	#20
al's71gmc 4 eyed fever Join Date: Jul 2005 Location: Eureka, Nevada Posts: 500	Re: Some odds and ends What would shipping be on the driver door trim? 89316 Al __________________ 1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!!

01-28-2006, 10:25 AM	#21
72swbcamo Active Member Join Date: Dec 2003 Location: Waterbury, CT Posts: 591	Re: Some odds and ends I'm interested in the A/C parts can you figure the shipping to 06705?

01-28-2006, 11:04 AM	#22
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Some odds and ends I'm at work today. I'll get the shipping figured tonight and post it up. Thanks, bighead

01-29-2006, 06:05 PM	#23
bighead Registered User Join Date: Nov 2005 Location: McKinney, Texas Posts: 465	Re: Some odds and ends 72 SWBcamo, The UPS calculator is showing about $30 shipping. Seems kind of high to me. Let me know if you want to do it. Al's71, I think I mis spoke on the trim. I think the long piece is from the bed in front of the wheel on a lwb. thanks, bighead Last edited by bighead; 01-29-2006 at 06:05 PM.

01-30-2006, 12:08 AM	#24
AKChevyman Chevy Forever Join Date: Jun 2005 Location: Dalzell SC Posts: 314	Re: Some odds and ends I maybe intrested in the AC dash if you don't mind shipping it. my zip is 83647 __________________ My first love 1971 C20 Hugger orange Getting face lift and heart transplant .30 402 BB /TH400 and GV Wifes car 1969 Chevelle SS 396 325hp/TH400 Factroy A/C Automatic w/ Floor shift console. restored.

Register or Log In To remove these advertisements.