option sheet - The 1947 - Present Chevrolet & GMC Truck Message Board Network

longhorn71 · 02-01-2006, 02:19 AM

here are the pics of the option sheet in the burb.........
I had to edit the pic so the blue looks darker then what it is(could not read it other wise)
the interior code is 605 red cloth interior

Russell · 02-01-2006, 02:45 AM

Gotta learn to use the close focus option on your camera!

But man, like I was telling you earlier today at the junkyard -- You scored big time on that truck...

Talk about big time rare!

longhorn71 · 02-01-2006, 02:54 AM

Quote:

Originally Posted by Russell

Gotta learn to use the close focus option on your camera!

But man, like I was telling you earlier today at the junkyard -- You scored big time on that truck...

Talk about big time rare!

i did but it still did not turn out

i am not much of a picture taken either

**special-K** · 02-01-2006, 07:34 AM

What does it say?

roger0080 · 02-02-2006, 12:38 AM

Could you please please please try it again (posting clear pictures so we can read the whole thing) ?

It would be neat to look that one over.

Looks like you have option F49 HD Front Axle -- "..rated capacity is the same as the standard front axle, it features heavier components. HD Bronze bushing and tapered roller kingpin thrust bearings are used in the upper and lower postions, respectively. The optional front axle also includes 7 inch-diameter steering knuckle ball joints and axle shaft universal joints which are stronger torsionally than those used with the standard driveline".

Now you know! I was wondering if I would get to see that option anytime.

It's an Oshawa Candaian GMC.

longhorn71 · 02-02-2006, 02:40 AM

here is what it says:
rear shock
center and rear
oil bath oil cleaner
16x6 kelsey 8 stud
dual horns
z49-manditory canadian equipmentn
ammeter-oil gauges
z62 custom c&c equipment
605 cloth inertior
hd front axle
block heater
4spd trans
heavy duty battery
push button radio
special paint

i never wrote down the codes but i could get them if needed

02-01-2006, 02:19 AM	#1
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	option sheet here are the pics of the option sheet in the burb......... I had to edit the pic so the blue looks darker then what it is(could not read it other wise) the interior code is 605 red cloth interior Last edited by longhorn71; 07-21-2006 at 02:45 AM.

02-01-2006, 02:45 AM	#2
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: option sheet Gotta learn to use the close focus option on your camera! But man, like I was telling you earlier today at the junkyard -- You scored big time on that truck... Talk about big time rare! __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

02-01-2006, 07:34 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: option sheet What does it say? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-02-2006, 12:38 AM	#5
roger0080 Registered User Join Date: Nov 2000 Location: Carver County, Minnesota, USA Posts: 626	Re: option sheet Could you please please please try it again (posting clear pictures so we can read the whole thing) ? It would be neat to look that one over. Looks like you have option F49 HD Front Axle -- "..rated capacity is the same as the standard front axle, it features heavier components. HD Bronze bushing and tapered roller kingpin thrust bearings are used in the upper and lower postions, respectively. The optional front axle also includes 7 inch-diameter steering knuckle ball joints and axle shaft universal joints which are stronger torsionally than those used with the standard driveline". Now you know! I was wondering if I would get to see that option anytime. It's an Oshawa Candaian GMC. __________________ 72 Chev C-10 90% restored (former AZ truck) ... 71 Chev K-20 Cheyenne my vacation crusier... 72 Chev C-10 Now retired and striped after many faithful miles... 72 GMC 1500 Retired to the junk yard after bought new in '71... Last edited by roger0080; 02-02-2006 at 12:40 AM.

02-02-2006, 02:40 AM	#6
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	Re: option sheet here is what it says: rear shock center and rear oil bath oil cleaner 16x6 kelsey 8 stud dual horns z49-manditory canadian equipmentn ammeter-oil gauges z62 custom c&c equipment 605 cloth inertior hd front axle block heater 4spd trans heavy duty battery push button radio special paint i never wrote down the codes but i could get them if needed Last edited by longhorn71; 02-02-2006 at 02:44 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.