wtb: NP205 w/32 spline input - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shelby987 · 02-14-2006, 04:33 PM

I am looking for an NP205 transfer case setup to mount to the TH400 (32 spline input).
Would prefer local, as shipping will likely kill me.

Thanks

cantburn · 02-15-2006, 12:10 AM

Shelby...if you don't find one locally I'll see what I can do down here with the connections I have. Chip

shelby987 · 02-16-2006, 04:52 PM

cantburn, if you could see what you can find it would be appreciated......I am having NO luck these last couple of days short of buying a whole truck to part out.....and that will likely cost more than my truck did originally.....would rather not go that route.

LILREDGMC · 02-18-2006, 10:03 AM

I have a 205 transfer circa 77-78 but it is from a NP 462 match up. Also have the 462. Is what your looking for only a 205/400 setup? Thanks for the info.

LILREDGMC

shelby987 · 02-20-2006, 09:29 AM

It needs to have the 32 spline count for it to work for what I am looking for, as far as I know, that is the th400 only.

72addict · 02-20-2006, 10:01 PM

I thought you weren't into automatics?

shelby987 · 02-21-2006, 09:02 AM

I am looking to do a swap for an NP overdrive 4 spd manual, the seller is telling me that the output shaft on the trans is 32 spline like the th400's.....and I think it would be easier to swap in an NP205 than stick with my dana 20 and try to retro fit it......but yes, as a rule, I prefer manual transmissions

454_72_4X4 · 02-22-2006, 10:12 PM

Quote:

Originally Posted by shelby987

I am looking to do a swap for an NP overdrive 4 spd manual, the seller is telling me that the output shaft on the trans is 32 spline like the th400's.....and I think it would be easier to swap in an NP205 than stick with my dana 20 and try to retro fit it......but yes, as a rule, I prefer manual transmissions

NP overdrive 4 sp? Would that be a NV4500?
Just curious because I'm slowly gathering parts for a NV4500 swap myself. If that's the trans you're planning on using there are other ways to do it but the 32 spline input 205 is the best.
Advance adapters makes conversion kits for the 10 spline and 27 spline input 205's also.

02-14-2006, 04:33 PM	#1
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	wtb: NP205 w/32 spline input I am looking for an NP205 transfer case setup to mount to the TH400 (32 spline input). Would prefer local, as shipping will likely kill me. Thanks __________________ 1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's 1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM!

02-15-2006, 12:10 AM	#2
cantburn ParrotHead Parts Join Date: Mar 2005 Location: Port St Lucie, Florida Posts: 218	Re: wtb: NP205 w/32 spline input Shelby...if you don't find one locally I'll see what I can do down here with the connections I have. Chip __________________ "I Love the Smell of a Salvage Yard in the Morning" 1992 GMC K1500; The best projects are those still in progress. (Paypal verified 100% positive feedback);

02-16-2006, 04:52 PM	#3
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Re: wtb: NP205 w/32 spline input cantburn, if you could see what you can find it would be appreciated......I am having NO luck these last couple of days short of buying a whole truck to part out.....and that will likely cost more than my truck did originally.....would rather not go that route. __________________ 1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's 1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM!

02-18-2006, 10:03 AM	#4
LILREDGMC Registered User Join Date: Oct 2001 Location: Pittsburgh, Pennsylvania USA Posts: 461	Re: wtb: NP205 w/32 spline input I have a 205 transfer circa 77-78 but it is from a NP 462 match up. Also have the 462. Is what your looking for only a 205/400 setup? Thanks for the info. LILREDGMC

02-20-2006, 09:29 AM	#5
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Re: wtb: NP205 w/32 spline input It needs to have the 32 spline count for it to work for what I am looking for, as far as I know, that is the th400 only. __________________ 1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's 1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM!

02-20-2006, 10:01 PM	#6
72addict Registered User Join Date: Mar 2000 Location: Mason MI, 48854 (strikezone of the mitten) Posts: 894	Re: wtb: NP205 w/32 spline input I thought you weren't into automatics? __________________ 1957 Cameo

02-21-2006, 09:02 AM	#7
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Re: wtb: NP205 w/32 spline input I am looking to do a swap for an NP overdrive 4 spd manual, the seller is telling me that the output shaft on the trans is 32 spline like the th400's.....and I think it would be easier to swap in an NP205 than stick with my dana 20 and try to retro fit it......but yes, as a rule, I prefer manual transmissions __________________ 1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's 1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.