Art control arms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

orange71 · 03-29-2006, 10:17 PM

Will the Art control arms and drop spindles lay the front crossmember on the ground with a 255-35-20?

tom71 · 03-30-2006, 01:15 AM

ive got art arms and 2 inch drop spindles on 20's with 40 series tires and the cross member is on the ground but is it low enough? i dunno i doubt it

XXL · 03-30-2006, 03:23 PM

Quote:

Originally Posted by orange71

Will the Art control arms and drop spindles lay the front crossmember on the ground with a 255-35-20?

That tire is 27" tall, so no. You'll be about 2.5-3" away. Doing one of captkaos' xmember section will get you 1.5-2" closer.

orange71 · 03-30-2006, 11:19 PM

Quote:

Originally Posted by XXL

That tire is 27" tall, so no. You'll be about 2.5-3" away. Doing one of captkaos' xmember section will get you 1.5-2" closer.

Thanks for the quick responces! I plan on doing the crossmember drop, but i am 1.5" away from laying the crossmember right now and i want to get rid of that gap first, and i was hoping those arms would do it!

bagged74 · 03-31-2006, 02:10 AM

I dont think those arms will actually get you any lower than stock ones. they just give you a little better geometry.

*SOMAD* · 03-31-2006, 09:05 AM

Yeah mine lays frame on 245/4020's on stock arms with 1.5 xmember drop and drop spindles. So it shouldnt be a prob with tub arms

orange71 · 03-31-2006, 08:29 PM

Somad can you tell me what you are running in the front of your truck as far as cup size for the lower, and what you are doing for the upper. I am currently bagged but it is 1.5 away from putting the front crossmember on the ground

03-29-2006, 10:17 PM	#1
orange71 Registered User Join Date: Sep 2002 Location: upland, california Posts: 146	Art control arms Will the Art control arms and drop spindles lay the front crossmember on the ground with a 255-35-20?

03-30-2006, 01:15 AM	#2
tom71 what happened to flint mi Join Date: Oct 2005 Location: san diego Posts: 436	Re: Art control arms ive got art arms and 2 inch drop spindles on 20's with 40 series tires and the cross member is on the ground but is it low enough? i dunno i doubt it __________________ 71 swb 2wd fleet frame off in progress 72 4x4 blazer daily driver 70 olds cutlass s mint condition owned by a grandma 56 gmc 2wd project waitng 97 fiance mobile

03-31-2006, 02:10 AM	#5
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	Re: Art control arms I dont think those arms will actually get you any lower than stock ones. they just give you a little better geometry.

03-31-2006, 09:05 AM	#6
SOMAD Account Suspended Join Date: Dec 2005 Location: sallis,MS Posts: 47	Re: Art control arms Yeah mine lays frame on 245/4020's on stock arms with 1.5 xmember drop and drop spindles. So it shouldnt be a prob with tub arms

03-31-2006, 08:29 PM	#7
orange71 Registered User Join Date: Sep 2002 Location: upland, california Posts: 146	Re: Art control arms Somad can you tell me what you are running in the front of your truck as far as cup size for the lower, and what you are doing for the upper. I am currently bagged but it is 1.5 away from putting the front crossmember on the ground



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.