videos of my truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

matthufham · 04-14-2006, 12:11 PM

of the engine finally running.

the one of the engine bay is running through 2 flowmaster 40 series, but it's not really good audio quality.

the open headers video is just that. it was so loud it shook the inner door handles off the door, even though they didn't have clips on they were tight fitting on the shaft. my hands are still shakin and my ears still hurt and it was 15 minutes ago.

http://www.youtube.com/profile_videos?user=matthufham

edit: there's only the first video on there now, the second one has been uploaded and in about 15 minutes will be approved

Putter · 04-14-2006, 12:22 PM

Looks pretty good...Does that have a Flex fan on it? When you rev it up...it sounds like a flex fan when they flatten out.

matthufham · 04-14-2006, 03:12 PM

it's a stock fan. you might be hearing all the vacuum being pulled into the carb.

*rage'nrat638* · 04-14-2006, 05:20 PM

SWEEEEET
here turn this up

http://www.jusspress.com/day.php?use...entTime=092427

vtblazer · 04-14-2006, 05:37 PM

Is that one yours rage? Wow

Must be the one in your sig.
Have you run it on the street yet? Very sweet.

LUV2XCLR8 · 04-14-2006, 08:54 PM

Quote:

Originally Posted by vtblazer

Is that one yours rage? Wow

Yeppers it's insane ehh

Yours is

too Matthufham

QKENUF4U · 04-15-2006, 01:43 AM

man RAGE your truck sounds very good. what cam ya running ? (lift?) sounds like a monster. ya gonna run flowmaster ?

FRENCHBLUE72 · 04-15-2006, 03:54 PM

http://videos.streetfire.net/video/6...DD1B343CBD.htm

quickie video of mine no where near rages but this is the 1st time in 5 years my truck has ran now just need to tear the motor back out to clena it up..

71Dragtruck · 04-15-2006, 04:01 PM

Couple of sound clips of mine in the dyno room. Idle clip is in the room, power pull is from the ouside the dyno room, exhaust exit on the other side of the building.

http://yukon.b0xen.us/audio/71dragtruckhpim1383.mp3

http://yukon.b0xen.us/audio/71dragtruckhpim1387.mp3

FRENCHBLUE72 · 04-15-2006, 04:09 PM

hey 71 how much power is that making???

*rage'nrat638* · 04-15-2006, 04:18 PM

yea..now thats what i am talking about...
718/729 lift

71Dragtruck · 04-15-2006, 04:20 PM

About 640hp, 620flb. torque on motor with a 750cfm carb, will eventually go to a 850cfm. Average from 4250rpm to 6500rpm is just under 600 for both.

04-14-2006, 12:11 PM	#1
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	videos of my truck of the engine finally running. the one of the engine bay is running through 2 flowmaster 40 series, but it's not really good audio quality. the open headers video is just that. it was so loud it shook the inner door handles off the door, even though they didn't have clips on they were tight fitting on the shaft. my hands are still shakin and my ears still hurt and it was 15 minutes ago. http://www.youtube.com/profile_videos?user=matthufham edit: there's only the first video on there now, the second one has been uploaded and in about 15 minutes will be approved Last edited by matthufham; 04-14-2006 at 12:12 PM.

04-14-2006, 12:22 PM	#2
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: videos of my truck Looks pretty good...Does that have a Flex fan on it? When you rev it up...it sounds like a flex fan when they flatten out. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 04-14-2006 at 12:23 PM.

04-14-2006, 03:12 PM	#3
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: videos of my truck it's a stock fan. you might be hearing all the vacuum being pulled into the carb.

04-14-2006, 05:20 PM	#4
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: videos of my truck SWEEEEET here turn this up http://www.jusspress.com/day.php?use...entTime=092427

04-14-2006, 05:37 PM	#5
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: videos of my truck Is that one yours rage? Wow Must be the one in your sig. Have you run it on the street yet? Very sweet. Last edited by vtblazer; 04-14-2006 at 05:38 PM.

04-15-2006, 01:43 AM	#7
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	Re: videos of my truck man RAGE your truck sounds very good. what cam ya running ? (lift?) sounds like a monster. ya gonna run flowmaster ?

04-15-2006, 03:54 PM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: videos of my truck http://videos.streetfire.net/video/6...DD1B343CBD.htm quickie video of mine no where near rages but this is the 1st time in 5 years my truck has ran now just need to tear the motor back out to clena it up.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-15-2006, 04:01 PM	#9
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: videos of my truck Couple of sound clips of mine in the dyno room. Idle clip is in the room, power pull is from the ouside the dyno room, exhaust exit on the other side of the building. http://yukon.b0xen.us/audio/71dragtruckhpim1383.mp3 http://yukon.b0xen.us/audio/71dragtruckhpim1387.mp3 __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs

04-15-2006, 04:09 PM	#10
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: videos of my truck hey 71 how much power is that making??? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-15-2006, 04:18 PM	#11
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: videos of my truck yea..now thats what i am talking about... 718/729 lift

04-15-2006, 04:20 PM	#12
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: videos of my truck About 640hp, 620flb. torque on motor with a 750cfm carb, will eventually go to a 850cfm. Average from 4250rpm to 6500rpm is just under 600 for both. __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.