full chassis swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ron_n_ca · 04-23-2006, 08:15 PM

Hi Guys... Newbie here. I have lurked on this board for a number of months and have recently obtained a 57 swb with a butchered chassis. I have read that using a 67-72 swb chassis is pretty easy by just changing the cab/radiator mounts and that a 71-72 is preferred because of stock disc brakes. I have also read that an S10 lwb can also be used. Has anyone done one of these conversions or does anyone have any constructive comments. Thanks in advance.

bassfisher · 04-23-2006, 10:43 PM

Hi don't know if this helps, but I have a 57 sb. step side that has ben suframed from a 74 1/2 that seem to work okay. It was done before I got the truck so do not know how hard it was to do? Has ft disc on it been told it was not very hard. Hope this helps.

Norselander · 04-24-2006, 12:48 PM

I have a complete swb '74 under my '58. The spring hangers out back were moved forward a bit, blocks were installed on top of the front cab mounts, and the radiator support was setup accordingly. here

55chevy · 04-26-2006, 02:26 PM

HAMB has an article on S10 swap but it's for a pre 55 truck, still may be helpful

http://www.jalopyjournal.com/forum/s...ead.php?t=8491

DennyB · 04-27-2006, 07:26 PM

Welcome to the fourms!

ron_n_ca · 04-27-2006, 08:16 PM

Thanks to all that responded.... Guess I going to have to pick up a 67-72 factory assembly manual and do a lot of carefull measuring to see how everything lines up.

cadman89 · 04-28-2006, 07:22 AM

Here is a 55 on a 72. He used 4" riser blocks under the cab. He also ran the gas fill from the original filler all the way back to the fuel cell in the rear.

http://www.neflnewhomes.com/55chevypu/1955pu.htm

Cadman

ron_n_ca · 04-28-2006, 03:19 PM

Cadman,
Thanks for the pics. Good detail of how the fenders were mounted.
Ron

Jebb1978 · 05-02-2006, 12:20 PM

That truck is sweet cadman! it looks completly stock at first glance!

qksilver · 05-03-2006, 12:19 AM

A trick I did, using a 66 frame was simple. Instead of blocks and all the rigging use the frame brackets off the original frame on to the swapped frame for the cab and core support. Drill, grind/torch the ones off the donor frame, do the same for the original frame. Measure twice, drill new holes in the donor frame and use grade 8 bolts with lock tight. It looks much cleaner and works well.

ron_n_ca · 05-05-2006, 10:04 AM

How did the bed and cab line up when put on the 66 chassis. Did it sit higher on the frame? Was the width any problem?

68c10owner · 06-30-2006, 01:15 AM

I hate to bring up a old threat but I`m in a similar situation and would be interested in the info about the 66 frame as well.

04-23-2006, 08:15 PM	#1
ron_n_ca Registered User Join Date: Jan 2006 Location: Sacramento,CA Posts: 6	full chassis swap Hi Guys... Newbie here. I have lurked on this board for a number of months and have recently obtained a 57 swb with a butchered chassis. I have read that using a 67-72 swb chassis is pretty easy by just changing the cab/radiator mounts and that a 71-72 is preferred because of stock disc brakes. I have also read that an S10 lwb can also be used. Has anyone done one of these conversions or does anyone have any constructive comments. Thanks in advance.

04-23-2006, 10:43 PM	#2
bassfisher Registered User Join Date: May 2005 Posts: 61	Re: full chassis swap Hi don't know if this helps, but I have a 57 sb. step side that has ben suframed from a 74 1/2 that seem to work okay. It was done before I got the truck so do not know how hard it was to do? Has ft disc on it been told it was not very hard. Hope this helps.

04-24-2006, 12:48 PM	#3
Norselander Clunker Farm, Proprietor Join Date: Oct 2003 Location: Coastal Northern California Posts: 124	Re: full chassis swap I have a complete swb '74 under my '58. The spring hangers out back were moved forward a bit, blocks were installed on top of the front cab mounts, and the radiator support was setup accordingly. here __________________ Drew Chief Junk Jockey

04-26-2006, 02:26 PM	#4
55chevy Car Truck Bike Nut Join Date: Aug 2005 Location: Suffolk Virginia Posts: 853	Re: full chassis swap HAMB has an article on S10 swap but it's for a pre 55 truck, still may be helpful http://www.jalopyjournal.com/forum/s...ead.php?t=8491 __________________ Snow free Florida panhandle, don't miss Indiana winters Temp in Suffolk Virginia, Sentenced 2 to 5 years LOL 68 shortfleet project 94 3500 TD dually so many cars so little time 72 K2 CST 2WD Blazer

04-27-2006, 07:26 PM	#5
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Re: full chassis swap Welcome to the fourms! __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

04-27-2006, 08:16 PM	#6
ron_n_ca Registered User Join Date: Jan 2006 Location: Sacramento,CA Posts: 6	Re: full chassis swap Thanks to all that responded.... Guess I going to have to pick up a 67-72 factory assembly manual and do a lot of carefull measuring to see how everything lines up.

04-28-2006, 07:22 AM	#7
cadman89 Registered User Join Date: Sep 2004 Location: Jacksonville, FL Posts: 265	Re: full chassis swap Here is a 55 on a 72. He used 4" riser blocks under the cab. He also ran the gas fill from the original filler all the way back to the fuel cell in the rear. http://www.neflnewhomes.com/55chevypu/1955pu.htm Cadman __________________ 56 GMC 1922 Dodge Rat Roadster 89 Gray Allante 90 Red Allante Turkey Run Photographer http://www.turkeyrun.com/photo_gallery.html

04-28-2006, 03:19 PM	#8
ron_n_ca Registered User Join Date: Jan 2006 Location: Sacramento,CA Posts: 6	Re: full chassis swap Cadman, Thanks for the pics. Good detail of how the fenders were mounted. Ron

05-02-2006, 12:20 PM	#9
Jebb1978 Senior Member Join Date: Aug 2005 Location: Mesa,Az Posts: 3,713	Re: full chassis swap That truck is sweet cadman! it looks completly stock at first glance! __________________ 1959 GMC project

05-03-2006, 12:19 AM	#10
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: full chassis swap A trick I did, using a 66 frame was simple. Instead of blocks and all the rigging use the frame brackets off the original frame on to the swapped frame for the cab and core support. Drill, grind/torch the ones off the donor frame, do the same for the original frame. Measure twice, drill new holes in the donor frame and use grade 8 bolts with lock tight. It looks much cleaner and works well.

05-05-2006, 10:04 AM	#11
ron_n_ca Registered User Join Date: Jan 2006 Location: Sacramento,CA Posts: 6	Re: full chassis swap How did the bed and cab line up when put on the 66 chassis. Did it sit higher on the frame? Was the width any problem?

06-30-2006, 01:15 AM	#12
68c10owner Registered User Join Date: Oct 2003 Location: Carmichael, California Posts: 3,011	Re: full chassis swap I hate to bring up a old threat but I`m in a similar situation and would be interested in the info about the 66 frame as well. __________________ Anthony



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.