WTB SWB 4x4 frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

otef546 · 04-30-2006, 01:38 AM

I have a 3/4 ton 4x4 lwb that I would like to change to a swb, does anyone have a swb 4x4 frame they would like to sell?Also is there any difference between a 1/2 ton 4x4 frame and a 3/4 ton frame? Can i get a swb 4x4 1/2 ton frame and just put all my running gear on the 1/2 ton frame?thanks for any info . Mike

krue · 04-30-2006, 04:34 AM

You shouldn't have any trouble with putting 3/4ton gear under a 1/2 ton frame. In fact when (if ever) I get the money to start fooling with my 72 blazer I wanna put 3/4 ton running gear under it.

muddyole 69 · 04-30-2006, 05:59 AM

You should check with mkmiller he is in magnolia and had a good deal on a whole truck good luck Mike

**Hart_Rod** · 04-30-2006, 08:02 AM

I think HuggerCST has one also.

**jerry moss** · 04-30-2006, 11:32 AM

you can also shorten your frame. if it's done properly you don't lose strength, there's a shop here locally that does it for a reasonable cost as long as the body is off. they do a "Z" cut and butt weld it.

otef546 · 04-30-2006, 02:37 PM

Thanks for the tips, I'll check with them. Jerry, I've got a man that will cut the frame but I thiught I would try to find a frame first.thanks

HuggerCST · 05-01-2006, 10:23 AM

I still have mine. I do have a buyer, but he hasn't come up with the money yet. It is a original short frame with 3/4 ton axles and springs, new spring bushings, a rebuilt 350 with aluminum intake, holley carb and hedders, rebuilt 350 trans, new transfer case adaptor, rebuilt transfer case, new driveshafts, HD radiator, shroud, brake booster & MC, and a clear title for $2000. mkmiller1 (Mathew) may still have his too, I'm not sure. He is only an hour or so north of me. Both of these trucks are on the "trucks for sale" board, but are probably a few pages back now.

otef546 · 05-01-2006, 02:30 PM

Huggger, thanks for the respone. I'm going to be out of town for a couple of days and when I get back I'm going to try and make a decision.I sent mkmiller a message but havn't heard from him yet. thanks MIke

otef546 · 05-11-2006, 10:55 PM

any others????? ttt

04-30-2006, 01:38 AM	#1
otef546 Junior Member Join Date: Sep 2005 Location: Beebe Arkansas Posts: 152	WTB SWB 4x4 frame I have a 3/4 ton 4x4 lwb that I would like to change to a swb, does anyone have a swb 4x4 frame they would like to sell?Also is there any difference between a 1/2 ton 4x4 frame and a 3/4 ton frame? Can i get a swb 4x4 1/2 ton frame and just put all my running gear on the 1/2 ton frame?thanks for any info . Mike

04-30-2006, 04:34 AM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: WTB SWB 4x4 frame You shouldn't have any trouble with putting 3/4ton gear under a 1/2 ton frame. In fact when (if ever) I get the money to start fooling with my 72 blazer I wanna put 3/4 ton running gear under it. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

04-30-2006, 05:59 AM	#3
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: WTB SWB 4x4 frame You should check with mkmiller he is in magnolia and had a good deal on a whole truck good luck Mike __________________ hav'n fun be'n me

04-30-2006, 08:02 AM	#4
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,862	Re: WTB SWB 4x4 frame I think HuggerCST has one also. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

04-30-2006, 11:32 AM	#5
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,948	Re: WTB SWB 4x4 frame you can also shorten your frame. if it's done properly you don't lose strength, there's a shop here locally that does it for a reasonable cost as long as the body is off. they do a "Z" cut and butt weld it. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

04-30-2006, 02:37 PM	#6
otef546 Junior Member Join Date: Sep 2005 Location: Beebe Arkansas Posts: 152	Re: WTB SWB 4x4 frame Thanks for the tips, I'll check with them. Jerry, I've got a man that will cut the frame but I thiught I would try to find a frame first.thanks

05-01-2006, 10:23 AM	#7
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: WTB SWB 4x4 frame I still have mine. I do have a buyer, but he hasn't come up with the money yet. It is a original short frame with 3/4 ton axles and springs, new spring bushings, a rebuilt 350 with aluminum intake, holley carb and hedders, rebuilt 350 trans, new transfer case adaptor, rebuilt transfer case, new driveshafts, HD radiator, shroud, brake booster & MC, and a clear title for $2000. mkmiller1 (Mathew) may still have his too, I'm not sure. He is only an hour or so north of me. Both of these trucks are on the "trucks for sale" board, but are probably a few pages back now. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com Last edited by HuggerCST; 05-01-2006 at 10:25 AM.

05-01-2006, 02:30 PM	#8
otef546 Junior Member Join Date: Sep 2005 Location: Beebe Arkansas Posts: 152	Re: WTB SWB 4x4 frame Huggger, thanks for the respone. I'm going to be out of town for a couple of days and when I get back I'm going to try and make a decision.I sent mkmiller a message but havn't heard from him yet. thanks MIke

05-11-2006, 10:55 PM	#9
otef546 Junior Member Join Date: Sep 2005 Location: Beebe Arkansas Posts: 152	Re: WTB SWB 4x4 frame any others????? ttt



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.