Prototype Blazer rear floor support is now done!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Classic Heartbeat** · 05-03-2006, 02:37 PM

Here you go guys. This is the first pair that we had reproduced. They have the ofset bend and all of the ones from now on will have the bolt holes punched in them. What do you think? I will have some for resale lator this weak or next. WES www.ClassicHeartbeat.com

**Classic Heartbeat** · 05-03-2006, 02:55 PM

Here one is clamped into place. WES

pound41 · 05-03-2006, 04:16 PM

Thats what I spent hours figuring out how to make. They look good

meathead95 · 05-03-2006, 04:48 PM

looks good i had to make one as well

**raggedjim** · 05-03-2006, 04:49 PM

Man, those look better than what I came up with. It's hard to do with a vise and a hammer...

Rg

LUV2XCLR8 · 05-03-2006, 05:35 PM

Sweeeeeeeeeeeeet Wes, any idea on price yet

**Classic Heartbeat** · 05-03-2006, 06:30 PM

It is looking like the price will come in somwhere around $29.95 per side. They are quite labor intencive to make, but they look to be well worth it. WES www.ClassicHeartbeat.com

Alexis · 05-03-2006, 07:01 PM

that look like some clean parts you got there.

You doing a great job repoing all these parts.

**Classic Heartbeat** · 05-03-2006, 07:39 PM

Well I put in an initial order of 30 of each side. Hopefully they will sell.....

WES www.ClassicHeartbeat.com

72armyswbtruck · 05-03-2006, 07:57 PM

I'm sure they will, especially once word gets out

**jamie72** · 05-03-2006, 10:07 PM

they should sell, i know i will be needing a set in the near future. thanks wes!!

EFI70Blazer · 05-04-2006, 05:42 AM

Hopefully i will not have to buy those, but good to know that the parts are available now.

jhow66 · 05-04-2006, 11:45 AM

Where were you when I needed them? Had to make my own. (good job!)

05-03-2006, 02:37 PM	#1
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Prototype Blazer rear floor support is now done!! Here you go guys. This is the first pair that we had reproduced. They have the ofset bend and all of the ones from now on will have the bolt holes punched in them. What do you think? I will have some for resale lator this weak or next. WES www.ClassicHeartbeat.com Attached Images __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

05-03-2006, 02:55 PM	#2
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Prototype Blazer rear floor support is now done!! Here one is clamped into place. WES Attached Images __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

05-03-2006, 04:16 PM	#3
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,268	Re: Prototype Blazer rear floor support is now done!! Thats what I spent hours figuring out how to make. They look good

05-03-2006, 04:48 PM	#4
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: Prototype Blazer rear floor support is now done!! looks good i had to make one as well __________________ 72 2wd blazer 72 swb 4x4

05-03-2006, 04:49 PM	#5
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,561	Re: Prototype Blazer rear floor support is now done!! Man, those look better than what I came up with. It's hard to do with a vise and a hammer... Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer - https://67-72chevytrucks.com/vboard/...d.php?t=856475 '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743

05-03-2006, 05:35 PM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Prototype Blazer rear floor support is now done!! Sweeeeeeeeeeeeet Wes, any idea on price yet __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-03-2006, 06:30 PM	#7
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Prototype Blazer rear floor support is now done!! It is looking like the price will come in somwhere around $29.95 per side. They are quite labor intencive to make, but they look to be well worth it. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

05-03-2006, 07:01 PM	#8
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,874	Re: Prototype Blazer rear floor support is now done!! that look like some clean parts you got there. You doing a great job repoing all these parts.

05-03-2006, 07:39 PM	#9
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Prototype Blazer rear floor support is now done!! Well I put in an initial order of 30 of each side. Hopefully they will sell..... WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

05-03-2006, 07:57 PM	#10
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: Prototype Blazer rear floor support is now done!! I'm sure they will, especially once word gets out __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

05-03-2006, 10:07 PM	#11
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	Re: Prototype Blazer rear floor support is now done!! they should sell, i know i will be needing a set in the near future. thanks wes!! __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

05-04-2006, 05:42 AM	#12
EFI70Blazer Active Member Join Date: Apr 2006 Location: Pendleton, OR Posts: 243	Re: Prototype Blazer rear floor support is now done!! Hopefully i will not have to buy those, but good to know that the parts are available now. __________________ Mike T. Oregon 70 GMC Jimmy 4x4 70 Camaro LS1 plans in the works 71 RS/SS Camaro numbers matching 86 Chevy Silverado SWB 4x4 (454 merlin heads, 3/4 running gear upgrade, Detroit lockers front and rear)

05-04-2006, 11:45 AM	#13
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	Re: Prototype Blazer rear floor support is now done!! Where were you when I needed them? Had to make my own. (good job!) __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.