Little steering column question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bkwagonss · 06-10-2006, 02:57 PM

I took my manual steering column apart to get the turn signal switch and wires for my "new" auto column.
I got the wheel off and shaft out. The switch is detached but I can't get it out. There must be a way to get it out without cutting the wires. Seems the column still need to come apart more, but I don't see how either the arm (the shift linkage attaches to at the bottom) or the aluminum block (the switch screws to at the top) comes off.
I don't see any more screws or retaining rings holding the rest together.

06-10-2006, 02:57 PM	#1
bkwagonss Junior Member Join Date: Jul 2005 Location: South Jersey Posts: 70	Little steering column question I took my manual steering column apart to get the turn signal switch and wires for my "new" auto column. I got the wheel off and shaft out. The switch is detached but I can't get it out. There must be a way to get it out without cutting the wires. Seems the column still need to come apart more, but I don't see how either the arm (the shift linkage attaches to at the bottom) or the aluminum block (the switch screws to at the top) comes off. I don't see any more screws or retaining rings holding the rest together. __________________ 1971 Short Stepside,(sold) 2011 Caprice PPV 1950 Chevy Fleetline Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=302759 Last edited by bkwagonss; 06-10-2006 at 02:58 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.