Where can I get these ?????? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 06-18-2006, 01:05 AM

anyopne here have these on there air set-up?????

67Fleet · 06-18-2006, 01:09 AM

just look like 90 degree quick disconnect bulkhead fittings. You should be able to get those from Suicide Doors, or a hydraulic supply company.

FRENCHBLUE72 · 06-18-2006, 02:09 AM

Thanks I ll go and look on the suicide site..

XXL · 06-18-2006, 11:21 AM

There are probably one or two places closer, but these guys have them in stock if you decide to have them shipped--

Parker Store - (316) 250-7754 - 1367 S Anna St, Wichita, KS 67209

71swb4x4 · 06-18-2006, 11:54 PM

I bought all of my fittings from www.hoseandfittings.com

Alvin · 06-19-2006, 08:50 AM

That first pic is my truck and the parts are from *****************. Two bulkhead fittings and two 90 degree elbows is all it takes. It's kinda difficult to get the lines in the bottom of the bulkhead (inside the crossmember) because it's a straight fitting, but my frame has been aired up in the garage for over a week with little to no change in height (or feel when I jump up and down on it). Considering this was my first time plumbing an air system, I count myself lucky to not have any leaks. Hopefully my luck sticks around, I'm going to be working on the rear suspension for the next few weeks.

Frizzle Fry · 06-19-2006, 01:21 PM

Those fittings are have been used in industry applications for years before airbags systems. They are also known as one-touch fittings. One of the major suppiers of those fittings and other pneumatic hardware/devices is called SMC. Here's an outlet that sells them individually on eBay

06-18-2006, 01:05 AM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Where can I get these ?????? anyopne here have these on there air set-up????? Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-18-2006, 01:09 AM	#2
67Fleet Outlandish Trends - FL Join Date: Jul 2005 Location: Orlando Posts: 1,396	Re: Where can I get these ?????? just look like 90 degree quick disconnect bulkhead fittings. You should be able to get those from Suicide Doors, or a hydraulic supply company. __________________ -Bret 67 short-fleet sold!

06-18-2006, 02:09 AM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Where can I get these ?????? Thanks I ll go and look on the suicide site.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-18-2006, 11:21 AM	#4
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Re: Where can I get these ?????? There are probably one or two places closer, but these guys have them in stock if you decide to have them shipped-- Parker Store - (316) 250-7754 - 1367 S Anna St, Wichita, KS 67209 Attached Images __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter Last edited by XXL; 06-18-2006 at 11:23 AM.

06-18-2006, 11:54 PM	#5
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Where can I get these ?????? I bought all of my fittings from www.hoseandfittings.com Attached Images __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

06-19-2006, 08:50 AM	#6
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: Where can I get these ?????? That first pic is my truck and the parts are from ***************. Two bulkhead fittings and two 90 degree elbows is all it takes. It's kinda difficult to get the lines in the bottom of the bulkhead (inside the crossmember) because it's a straight fitting, but my frame has been aired up in the garage for over a week with little to no change in height (or feel when I jump up and down on it). Considering this was my first time plumbing an air system, I count myself lucky to not have any leaks. Hopefully my luck sticks around, I'm going to be working on the rear suspension for the next few weeks. __________________ Ethel** - The Legend Continues... Ethel has been sold.

06-19-2006, 01:21 PM	#7
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Where can I get these ?????? Those fittings are have been used in industry applications for years before airbags systems. They are also known as one-touch fittings. One of the major suppiers of those fittings and other pneumatic hardware/devices is called SMC. Here's an outlet that sells them individually on eBay



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.