rubber hose question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76bonanza · 07-11-2006, 11:19 PM

What is the best way to shine rubber rad hose? Can you use a tire shine product? Also I assum you can use simply green on them with out damage?

Thanks

dion · 07-12-2006, 03:06 AM

I use armor all on mine sometimes, seems to clean them up a bit.

blaserman · 07-12-2006, 03:50 AM

I have used Armor All and tire shine both with good results. I clean them up first with soapy water dry them and then used both. It is up to you what you want to use. Try both and see.

**Stocker** · 07-12-2006, 08:38 AM

I haven't used it on hoses, but 303 works very nicely on tires, as well as vinyl and plastics.

71chevytruckguy · 07-12-2006, 11:15 PM

i use armor all on mine when gettin it ready for shows. doesn't last very long though. chris.

07-11-2006, 11:19 PM	#1
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	rubber hose question What is the best way to shine rubber rad hose? Can you use a tire shine product? Also I assum you can use simply green on them with out damage? Thanks __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

07-12-2006, 03:06 AM	#2
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	Re: rubber hose question I use armor all on mine sometimes, seems to clean them up a bit. __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

07-12-2006, 03:50 AM	#3
blaserman Senior Member Join Date: Nov 2004 Location: glen burnie md Posts: 447	Re: rubber hose question I have used Armor All and tire shine both with good results. I clean them up first with soapy water dry them and then used both. It is up to you what you want to use. Try both and see. __________________ This is my best friend

07-12-2006, 08:38 AM	#4
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,749	Re: rubber hose question I haven't used it on hoses, but 303 works very nicely on tires, as well as vinyl and plastics. __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay Last edited by Stocker; 07-12-2006 at 08:38 AM.

07-12-2006, 11:15 PM	#5
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: rubber hose question i use armor all on mine when gettin it ready for shows. doesn't last very long though. chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.