Rear stainless brake line - The 1947 - Present Chevrolet & GMC Truck Message Board Network

badchev69 · 08-16-2006, 11:20 PM

Anyone have any prefered manufactures for a rear brake line for a 72 blazer? All the ones i have found are for 4-8 inches of lift... I have 13". Any suggestions would be great! Thanks.

Joe67 · 08-17-2006, 08:12 AM

Contact www.inlinetube.com - they will make whatever you need

badchev69 · 08-17-2006, 03:34 PM

sweet! thanks

**special-K** · 08-18-2006, 08:24 AM

Ok,so you`re looking for the brake hose,not the lines.I bought extended braided brake hoses for my Highlander from Skyjacker.The package says 69-72 Chevy 6-8"/They must sell the same hose for every application.It needs to be male at the block end and it`s female/no male-male adaptor provided.They did provide an adapter for the other end since it`s a different size fitting.Pretty disappointing piece of generic bull crud for alot of money IMO.I wish I had ordered one from Inline.I just installed my custom 5" longer e-brake cables from them and am very pleased.Ordered Thursday around noon,had them Saturday morning.And,they were custom-made!Not too shabby.

**special-K** · 08-21-2006, 10:42 PM

I just ordered a braided stainless brake hose (custom length) they will work w/o adapters at either end,T-block,and stainless axle lines w/spring wrap for $100 shipped from Inline.

badchev69 · 08-22-2006, 01:43 PM

Sweet thanks, I actually got my hands on one from a friend. We ended up having to switch out the rear axle hard lines because the ends didnt match but it worked out ALOT cheaper in the long run..

**special-K** · 08-26-2006, 09:36 AM

Most Stainless hoses have 5/16" fittings.These trucks have 1/4".The s/s hoses are a smaller bore.They made mine with 1/4" fittings.Glad you`re back on track.

08-16-2006, 11:20 PM	#1
badchev69 Active Member Join Date: Apr 2004 Location: Stayton, Oregon 97383 Posts: 178	Rear stainless brake line Anyone have any prefered manufactures for a rear brake line for a 72 blazer? All the ones i have found are for 4-8 inches of lift... I have 13". Any suggestions would be great! Thanks. __________________ 1969 C10 SWB /350 vortech/th400 1968 SWB build (in progress) 1969 SWB build (my son's future project) 1968 camaro yellow/white stripes (wife's car) 2011 GMC reg cab short bed 2wd daily driver 5/7 drop on 22's 1972 K5 Blazer 13"/11"lift,38"M/T MTZ's, 3" cust exst. 350/350 (sold it )

08-17-2006, 08:12 AM	#2
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Re: Rear stainless brake line Contact www.inlinetube.com - they will make whatever you need __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

08-17-2006, 03:34 PM	#3
badchev69 Active Member Join Date: Apr 2004 Location: Stayton, Oregon 97383 Posts: 178	Re: Rear stainless brake line sweet! thanks __________________ 1969 C10 SWB /350 vortech/th400 1968 SWB build (in progress) 1969 SWB build (my son's future project) 1968 camaro yellow/white stripes (wife's car) 2011 GMC reg cab short bed 2wd daily driver 5/7 drop on 22's 1972 K5 Blazer 13"/11"lift,38"M/T MTZ's, 3" cust exst. 350/350 (sold it )

08-18-2006, 08:24 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Rear stainless brake line Ok,so you`re looking for the brake hose,not the lines.I bought extended braided brake hoses for my Highlander from Skyjacker.The package says 69-72 Chevy 6-8"/They must sell the same hose for every application.It needs to be male at the block end and it`s female/no male-male adaptor provided.They did provide an adapter for the other end since it`s a different size fitting.Pretty disappointing piece of generic bull crud for alot of money IMO.I wish I had ordered one from Inline.I just installed my custom 5" longer e-brake cables from them and am very pleased.Ordered Thursday around noon,had them Saturday morning.And,they were custom-made!Not too shabby. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 08-18-2006 at 08:25 AM.

08-21-2006, 10:42 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Rear stainless brake line I just ordered a braided stainless brake hose (custom length) they will work w/o adapters at either end,T-block,and stainless axle lines w/spring wrap for $100 shipped from Inline. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-22-2006, 01:43 PM	#6
badchev69 Active Member Join Date: Apr 2004 Location: Stayton, Oregon 97383 Posts: 178	Re: Rear stainless brake line Sweet thanks, I actually got my hands on one from a friend. We ended up having to switch out the rear axle hard lines because the ends didnt match but it worked out ALOT cheaper in the long run.. __________________ 1969 C10 SWB /350 vortech/th400 1968 SWB build (in progress) 1969 SWB build (my son's future project) 1968 camaro yellow/white stripes (wife's car) 2011 GMC reg cab short bed 2wd daily driver 5/7 drop on 22's 1972 K5 Blazer 13"/11"lift,38"M/T MTZ's, 3" cust exst. 350/350 (sold it )

08-26-2006, 09:36 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Rear stainless brake line Most Stainless hoses have 5/16" fittings.These trucks have 1/4".The s/s hoses are a smaller bore.They made mine with 1/4" fittings.Glad you`re back on track. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.