Will they fit?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LOHRTBT · 08-30-2006, 12:17 PM

2000 2wd Tahoe Wheels (6 lug) on a 78 4wd K5? 6 lug

b454rat · 08-30-2006, 12:37 PM

Dont' think so, the hub hole is smaller on the NBS, and even if it did, they are waaaaaay offset, and would look really goofy.

LOHRTBT · 08-30-2006, 12:53 PM

well that sux lol. Thanks man! that was the thing I was worried about..the hub hole.

Slonaker · 08-30-2006, 05:53 PM

Quote:

LOHRTBT

Who?

I thought I read here that they would fit, but required some special lug nuts or something. I may be mistaken since I don't actually own anything 6 lug.

Slonaker

cliffsta · 08-30-2006, 08:12 PM

LMAO @ Slone... LOHRTBT is never in the 73-87 forums :P

I've seen the newer wheels (99-02 or w/e) on a truck like ours before. I can't remember who, but someone here had them. Now, dunno if it was 2/4wd though. It has been done, but its more common to see 88-98 wheels on our trucks.

Grande Rojo · 08-30-2006, 08:23 PM

I have a set of 2006 2wd wheels off of my wife new TAHOE 6 LUG.
Plus, I have a 86 4x4 k5 blazer.

Would you like me to try if one will fit for you (cause I'm a nice guy)?

84 400 · 08-30-2006, 08:40 PM

Quote:

Originally Posted by Grande Rojo

I have a set of 2006 2wd wheels off of my wife new TAHOE 6 LUG.
Plus, I have a 86 4x4 k5 blazer.

Would you like me to try if one will fit for you (cause I'm a nice guy)?

thats a very nice offer man. if you do post some pics as i thnk we would all like to see how it looks

1987 Shortwide · 08-30-2006, 10:04 PM

I know low84 had that lifted SWB with hummer wheels on it, I don't know that he had stock axles though.

79Silv4x4 · 08-30-2006, 10:20 PM

Quote:

Originally Posted by LOHRTBT

2000 2wd Tahoe Wheels (6 lug) on a 78 4wd K5? 6 lug

ABSOLUTELY. Drop the rear gate and toss 'em in

. Seriously though, I'm not sure--they could likely be made to fit but would prolly look like a$$ due to the offset. . .

**N2TRUX** · 08-30-2006, 10:24 PM

Quote:

Originally Posted by 1987 Shortwide;

I know low84 had that lifted SWB with hummer wheels on it, I don't know that he had stock axles though.

Hummer wheels are 8 lug so it must have had 3/4 ton axles....

LOHRTBT · 08-31-2006, 12:05 AM

Hey guys... I know I know..long time no see haha!!

WEll I got them sold for my buddy. Another buddy with a 99Z71 bought them. We measured everything up and they will work.

Thanks! Good to hear from you all!

**N2TRUX** · 08-31-2006, 08:31 AM

Hit and run Dave...

LOHRTBT · 08-31-2006, 10:23 AM

lol

84 400 · 08-31-2006, 01:28 PM

man i would love to see what they would look like on our trucks if they can even fit ahhh well

79BIG10 · 08-31-2006, 11:16 PM

Damn Dave I think of you everytime I smoke a brisket. How's things going? I'll be in Turner Falls next month if you're freed up let me know.

LOHRTBT · 09-01-2006, 09:11 AM

Heck yes mang!! Hit me up!! I should be around.

mmmmmm brisket!!

Prerunner1982 · 09-01-2006, 12:39 PM

Dang B I was in Sulphur Oklahoma, camping last weekend. Sucks we couldnt have worked something out and gone on the same weekend... have fun man.

08-30-2006, 12:17 PM	#1
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Will they fit?? 2000 2wd Tahoe Wheels (6 lug) on a 78 4wd K5? 6 lug __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

08-30-2006, 12:37 PM	#2
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,469	Re: Will they fit?? Dont' think so, the hub hole is smaller on the NBS, and even if it did, they are waaaaaay offset, and would look really goofy. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

08-30-2006, 12:53 PM	#3
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Re: Will they fit?? well that sux lol. Thanks man! that was the thing I was worried about..the hub hole. __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

08-30-2006, 08:12 PM	#5
cliffsta Stepsides RULE Join Date: Jul 2004 Location: Pineville, LA Posts: 1,921	Re: Will they fit?? LMAO @ Slone... LOHRTBT is never in the 73-87 forums :P I've seen the newer wheels (99-02 or w/e) on a truck like ours before. I can't remember who, but someone here had them. Now, dunno if it was 2/4wd though. It has been done, but its more common to see 88-98 wheels on our trucks. __________________ 1981 Chevy C10 Custom Deluxe Stepside 350 V8, headers, side exhausts, 3-speed auto SOLD 1980 Chevy C10 Custum Deluxe Stepside 305 V8, Edelbrock Performer Intake, Edelbrock 1406 600CFM 4-barrel, TH350C. Bent rod. SOLD 1984 GMC Sierra Classic Longbed 6.2L Diesel SOLD 2009 Kawasaki KLX-250S too many mods for this signature 1999 Honda Accord EX 4-cylinder, 17" Motegi Wheels 215/45/17 Sumitomo tires, Tein S-Tech lowering springs, KYB GR2 shocks, Acura TL 20mm rear swaybar, debadged, blackhoused headlights, Short-Ram Intake Cardomain of the Accord

08-30-2006, 08:23 PM	#6
Grande Rojo paper or plastic? Join Date: Nov 2002 Location: SW Missouri Posts: 671	Re: Will they fit?? I have a set of 2006 2wd wheels off of my wife new TAHOE 6 LUG. Plus, I have a 86 4x4 k5 blazer. Would you like me to try if one will fit for you (cause I'm a nice guy)? __________________ 1967 Chevy SWB 250 http://67-72chevytrucks.com/vboard/s...d.php?t=442157 1977 Chevy SWB 454 No More 454 getting 5.3 http://67-72chevytrucks.com/vboard/s...d.php?t=310518 1977 Stepside Truck of the month winner http://67-72chevytrucks.com/vboard/s...d.php?t=135524 1965 Chevy C10 454 http://67-72chevytrucks.com/vboard/s...d.php?t=731372 1975 Dodge Power Wagon http://67-72chevytrucks.com/vboard/s...=1#post7871388

08-30-2006, 10:04 PM	#8
1987 Shortwide Senior Member Join Date: Feb 2003 Location: Wichita KS Posts: 610	Re: Will they fit?? I know low84 had that lifted SWB with hummer wheels on it, I don't know that he had stock axles though. __________________ ~Steve~ Friesen High Performance Auto and Graphics Toy: 87 Shortwide, 406 smallblock with a little boost My 87 buildup Daily Driver: 99 Sierra SLE 4X4. Black on Black and harder than hell to keep clean.

08-31-2006, 12:05 AM	#11
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Re: Will they fit?? Hey guys... I know I know..long time no see haha!! WEll I got them sold for my buddy. Another buddy with a 99Z71 bought them. We measured everything up and they will work. Thanks! Good to hear from you all! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

08-31-2006, 08:31 AM	#12
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Will they fit?? Hit and run Dave... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

08-31-2006, 10:23 AM	#13
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Re: Will they fit?? lol __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

08-31-2006, 01:28 PM	#14
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	Re: Will they fit?? man i would love to see what they would look like on our trucks if they can even fit ahhh well __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

08-31-2006, 11:16 PM	#15
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Re: Will they fit?? Damn Dave I think of you everytime I smoke a brisket. How's things going? I'll be in Turner Falls next month if you're freed up let me know. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson Last edited by 79BIG10; 08-31-2006 at 11:16 PM.

09-01-2006, 09:11 AM	#16
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Re: Will they fit?? Heck yes mang!! Hit me up!! I should be around. mmmmmm brisket!! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

09-01-2006, 12:39 PM	#17
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	Re: Will they fit?? Dang B I was in Sulphur Oklahoma, camping last weekend. Sucks we couldnt have worked something out and gone on the same weekend... have fun man. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.