11-13-2006, 07:01 PM | #1 |
Registered User
Join Date: Apr 2006
Location: Peachland
Posts: 106
|
Cross member rivets
I have 3 cross members to remove.What is the best way to remove the rivets? Thanks
|
11-13-2006, 07:16 PM | #2 |
Registered User
Join Date: Jul 2006
Location: Central PA
Posts: 12,201
|
Re: Cross member rivets
get a $2 4" cutoff wheel and attach it to your hand grinder. Knicks em right off if you can get to em. punch the rivet out then with a hammer/chisel or air chisel.
|
11-13-2006, 07:46 PM | #3 |
Registered User
Join Date: Sep 2006
Location: Omaha, NE
Posts: 1,982
|
Re: Cross member rivets
we torch em.. starting from the top of the rivet and blow it away... no damage to the frame.
__________________
-1947 3100 -1968 C10 -1970 K20 |
11-13-2006, 07:47 PM | #4 |
Registered User
Join Date: Sep 2006
Location: Omaha, NE
Posts: 1,982
|
Re: Cross member rivets
and it involves fire- which is usually pretty sweet!
__________________
-1947 3100 -1968 C10 -1970 K20 |
11-13-2006, 07:53 PM | #5 |
Outlandish Trends - FL
Join Date: Jul 2005
Location: Orlando
Posts: 1,396
|
Re: Cross member rivets
I take a grinder and cut an X pattern in the rivet, then use an air chisel and knock the head off. Then put a bull point bit in the air hammer and punch the rivet out.
__________________
-Bret 67 short-fleet sold! |
11-13-2006, 07:55 PM | #6 |
Registered User
Join Date: Sep 2006
Location: Omaha, NE
Posts: 1,982
|
Re: Cross member rivets
pretty good idea! i just always used the torch cause im a pyro... it would be much easier not to have to get that thing out every time i suppose!
__________________
-1947 3100 -1968 C10 -1970 K20 |
11-13-2006, 08:29 PM | #7 |
Senior Member
Join Date: Mar 2004
Location: Somewhere
Posts: 985
|
Re: Cross member rivets
i've done it 3 ways and by far the easest is an air chisel. a bit that looks like a wood chisel "flat on one side with about a 30% angle on the other side." granted a torch is faster but also more dangerous to yourself and the frame if you don't know what your doing. i've also had great luck with a grinder with a 40 grit flap disk.
ondrew |
11-13-2006, 08:49 PM | #8 | |
Account Suspended
Join Date: Jun 2000
Location: over yonder
Posts: 14,270
|
Re: Cross member rivets
Quote:
Haven't found one yet that wouldn't come out using this method. Although some require a larger hammer than others. |
|
11-13-2006, 09:33 PM | #9 |
Registered User
Join Date: May 2004
Location: Lubbock, Texas
Posts: 2,121
|
Re: Cross member rivets
When in doubt, get a bigger hammer.
__________________
'96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer |
11-13-2006, 09:37 PM | #10 |
67-72 parts finder
Join Date: Aug 2006
Location: southeast mo
Posts: 788
|
Re: Cross member rivets
on my 69 some jerk took a torch and cut the 3 spd crossmember out of it leaving part of it on the frame still with the rivets attached, why he didn't just blow off the rivet heads i do not know but thats something left for me now
__________________
1969 chevy shortstep 2wd (under construction) 1981 chevy scottsdale lwb 2wd (parts chaser) 2004 pontiac gto (daily driver) 2004 pontiac grand prix gt (the ol ladys car) 1985 chevy short wide 1970 chevy c10 lwb (another parts rig) 1969 gmc lwb (rainy day project) 1968 chevy lwb c10 250 I6 3 spd (soon to be swb) |
11-13-2006, 09:49 PM | #11 |
Registered User
Join Date: Sep 2006
Location: Covington, WA
Posts: 770
|
Re: Cross member rivets
I did that on mine because I didn't want to get too close to the fuel lines which run inside of the passenger side of the frame if I remember correctly(haven't seen the truck in 4 months). Now that I read this thread I'm gonna go and cut them out with an airchizzle and a grinder, cuz I didn't know that method at the time.
|
11-28-2006, 03:11 AM | #12 |
Registered User
Join Date: Sep 2006
Location: Omaha, NE
Posts: 1,982
|
Re: Cross member rivets
its actually pretty surprising how many ive seen done like that..
__________________
-1947 3100 -1968 C10 -1970 K20 |
11-28-2006, 04:50 PM | #13 |
soon to be bagged64sub
Join Date: Feb 2005
Location: DFW-currently phoenix
Posts: 635
|
Re: Cross member rivets
Im about to do this. I think Ill use the X method with an air hammer and cutoff wheel.
__________________
1969 c-10, bagged, Zd, 20" Boyds SOLD! 1964 Suburban COMING SOON Build threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=304726 1965 c-10 long bed 1993 Sierra x-cab 1999 tahoe-4/5 on 22s 2005 Chevy work truck |
11-28-2006, 05:34 PM | #14 |
Registered User
Join Date: Oct 2005
Location: Indiana
Posts: 7
|
Re: Cross member rivets
I have found that an air chisel can be the quickest and easiest way.
|
11-28-2006, 08:57 PM | #15 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: Cross member rivets
Try getting to those top rivets on that crossmember & you'll know why some people just cut it off flush w/the frame rail. You won't get a cut-off wheel or air chisel in there & not everyone has access to a torch.
On the few trucks I've done, if we didn't have a torch & the truck was completly assembled, we just cut the c.member flush w/the frame so that it was out of the way. If the body was off, we removed all rivets & pieces completely.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. Last edited by SCOTI; 11-28-2006 at 08:59 PM. |
Bookmarks |
|
|