Axle Code - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Palf70Step** · 11-25-2006, 09:02 PM

I was cleaning the rear of the truck today and was looking at the codes numbers I found on the rear axle. Is this the right code to look up to see what gears I have. The first two letters doesn't match anything that I have for the 69/70 model year

This code came off the passenger front side of the pumpkin housing

NF3896838

Thanks

72dually · 11-25-2006, 09:11 PM

You need to get the #'s off the front passenger side axle tube, that will tell you everything, including date and gear code

**Boog** · 11-25-2006, 09:15 PM

Only if the gears haven't been changed though..

**Palf70Step** · 11-25-2006, 09:43 PM

Quote:

Originally Posted by 72dually

You need to get the #'s off the front passenger side axle tube, that will tell you everything, including date and gear code

That's what I thought, but I had never seen a clean one before and numbers in this location so, I thought this mught be it. Time to get dirty again tomorrow.

72dually · 11-25-2006, 09:50 PM

Yep , your going to have to get a little dirty. A wire brush should do if it hasn't been re-painted. If you slide in front of the passenger rear tire, it will be around the middle of the tube.

11-25-2006, 09:02 PM	#1
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,349	Axle Code I was cleaning the rear of the truck today and was looking at the codes numbers I found on the rear axle. Is this the right code to look up to see what gears I have. The first two letters doesn't match anything that I have for the 69/70 model year This code came off the passenger front side of the pumpkin housing NF3896838 Thanks __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! Last edited by Palf70Step; 11-25-2006 at 09:03 PM.

11-25-2006, 09:11 PM	#2
72dually Senior Member Join Date: Apr 2004 Location: Northern Arizona Posts: 687	Re: Axle Code You need to get the #'s off the front passenger side axle tube, that will tell you everything, including date and gear code __________________ 70 GMC shortbed fleetside with a 72 chevy costume Last edited by 72dually; 11-25-2006 at 09:14 PM.

11-25-2006, 09:15 PM	#3
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,584	Re: Axle Code Only if the gears haven't been changed though.. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

11-25-2006, 09:50 PM	#5
72dually Senior Member Join Date: Apr 2004 Location: Northern Arizona Posts: 687	Re: Axle Code Yep , your going to have to get a little dirty. A wire brush should do if it hasn't been re-painted. If you slide in front of the passenger rear tire, it will be around the middle of the tube. __________________ 70 GMC shortbed fleetside with a 72 chevy costume Last edited by 72dually; 11-25-2006 at 09:51 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.