3 in Drop Spindles... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

COACHMEASON · 12-17-2006, 06:52 PM

I have not heard anything about Belltechs 3in drop spindles...I assume my 15in rims arent going to work...Would like to get a 3/5 drop

**lolife99** · 12-17-2006, 07:44 PM

15's will work,... but you WILL have to grind a little clearence on the lower control arm just below the lower ball joint. I've done it a 1/2 dozen times or more. No big deal. When you are done,... put the wheels on and check clearences when you turn the wheels lock to lock. Make sure the truck is on the ground not on the jack stands.

12-17-2006, 06:52 PM	#1
COACHMEASON Keep On Keepin' On Join Date: Apr 2006 Location: Oklahoma Posts: 416	3 in Drop Spindles... I have not heard anything about Belltechs 3in drop spindles...I assume my 15in rims arent going to work...Would like to get a 3/5 drop

12-17-2006, 07:44 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: 3 in Drop Spindles... 15's will work,... but you WILL have to grind a little clearence on the lower control arm just below the lower ball joint. I've done it a 1/2 dozen times or more. No big deal. When you are done,... put the wheels on and check clearences when you turn the wheels lock to lock. Make sure the truck is on the ground not on the jack stands. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.