|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-23-2006, 09:24 PM
|
#1 |
|
Weekend Warrior
Join Date: Oct 2004
Location: CT
Posts: 1,787
|
Like Seeing Broken Motor Pictures????? - Check it out.
Merry Christmas!!!!!!!!!
I love seeing broken motor pictures (well only if it insn't a Chevy V8 or mine  )Anyway My buddy got this motor job in today '94 Jeep Grand Cherokee  - I think it's factory - so you can dump oil right on the dizzy And check out that nice big hole towards the front. 
__________________
-'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered   
Last edited by arkracing; 12-23-2006 at 09:25 PM. |
|
|
|
12-23-2006, 09:26 PM
|
#2 |
|
Chevy truck addict
Join Date: Apr 2005
Location: Thornton Colorado
Posts: 825
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
Man I bet that baby ran good. HAHA what the hell happened?
|
|
|
|
|
12-23-2006, 09:28 PM
|
#3 |
|
Weekend Warrior
Join Date: Oct 2004
Location: CT
Posts: 1,787
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
Who the heck knows - usually those 4.0L Chryslers runn good. Must have been running it hard with no oil or something - one of those "friend of a friend" deals
__________________
-'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered
|
|
|
|
|
12-23-2006, 09:41 PM
|
#4 |
|
Member #1049
Join Date: Jun 2000
Location: Troy Montana
Posts: 3,940
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
Here's one that will make you cry... Brand new boat first run... rod broke.. part of it went thru the hull... sinking it...
|
|
|
|
|
12-23-2006, 09:58 PM
|
#5 |
|
Registered User
Join Date: Dec 2006
Location: Montana
Posts: 223
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
I'm guessing the first pic had no antifreeze in it and froze up.
|
|
|
|
|
12-23-2006, 09:59 PM
|
#6 |
|
Registered User
Join Date: Nov 2003
Location: Alexandria, VA
Posts: 1,534
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
Looks like scrap iron now...lol
__________________
'72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.   
|
|
|
|
|
12-23-2006, 10:05 PM
|
#7 |
|
Cantankerous Geezer
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,264
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
I was thinking crankcase explosion.
__________________
Fred There is no such thing as too much cam...just not enough engine. 
|
|
|
|
|
12-23-2006, 10:13 PM
|
#8 |
|
Registered User
Join Date: Sep 2006
Location: Midlothian, Tx
Posts: 144
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
Here's some pics of a new Escalade with 5200 miles that my buddy got in at his shop last week. The head of the valve came of but the stem stayed in place you can see what else happened.
|
|
|
|
|
12-23-2006, 10:15 PM
|
#9 | |
|
Weekend Warrior
Join Date: Oct 2004
Location: CT
Posts: 1,787
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
Quote:
That was my guess. No water jacket there - that is actually like the Chevy 6's that is all Crank Case and Cam where that Chrysler Cracked OUCH on the Boat BBC - some machine shop assembly dude has some explaining to do. I hate seeing it happen to chevy motors - especially built BBC's 5200 on the Escalade!!!!! - hope it's under warranty 
__________________
-'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered
Last edited by arkracing; 12-23-2006 at 10:18 PM. |
|
|
|
|
|
12-23-2006, 10:20 PM
|
#10 |
|
Registered User
Join Date: Jan 2006
Location: sidney , illinois
Posts: 312
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
this was taken at the npca nats in indy . 65 chevelle if i recall correctly . owner was pretty bummed
__________________
hey.....smell my finger 64 nova wagon , 63 nova convertible |
|
|
|
|
12-23-2006, 10:27 PM
|
#11 | |
|
Weekend Warrior
Join Date: Oct 2004
Location: CT
Posts: 1,787
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
Quote:
WTF - the crank break right off and dissappear??? Almost looks like the (missing) snout on the crank wasn't strong enough for the blower WOW - that is a good one - too bad it's another Chevy though
__________________
-'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered
Last edited by arkracing; 12-23-2006 at 10:30 PM. |
|
|
|
|
|
12-24-2006, 12:51 AM
|
#12 |
|
Registered User
Join Date: Nov 2006
Location: Windsor, PA
Posts: 318
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
this ones in great shape, on sale...
 Here is a piston out of our LAST ford engine we put together. after this engine we just put in a 302 and sold the frigging thing after the fourth motor (3 351 windsors and a 302)  I just wish I could upload a video of our sister car (79 camaro) when it blew up coming out of turn 2 about 2 months back. the owner said he heard it knocking and coming off the top of 2 it went and man did it smoke. he kept the oil pan and the peices we could find off the straightaway and in 3 & 4. amazingly, the motor STILL RAN and he pulled it up onto the trailer and then it finally died. if I can get over there sometime soon i'll get a picture of whats left of his oil pan and the peices. I beleive he said it swallowed a valve spring and took out 7 and broke the rod and sent the rod through the oil pan, but I dont remember for sure. Not a way to lose a $5000 race engine, but it was one helluva show and we got a good laugh about it after we had the new engine for the next race!
Last edited by racerman85; 12-24-2006 at 12:52 AM. |
|
|
|
|
12-24-2006, 03:29 AM
|
#13 |
|
Registered User
 
Join Date: Feb 2004
Location: Idaho
Posts: 4,033
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
Darn those are some sweet lookin breaks
__________________
"Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!" |
|
|
|
|
12-24-2006, 09:50 AM
|
#14 |
|
Account Suspended
Join Date: Mar 2003
Location: ** THE FALL GUY **CHICAGO IL
Posts: 5,883
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
heres my 900.00 coan converter junk they would not stand behind
Last edited by rage'nrat638; 07-12-2007 at 06:59 AM. |
|
|
|
|
12-24-2006, 10:15 PM
|
#15 |
|
The Older Generation
  
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 26,083
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
This one's kind of neat. Hope you can see it OK. The oil pan is by the back tire and you can see the flywheel, crank, and one piston under neath the car. Check out where the driver is looking.......
 LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
12-24-2006, 10:45 PM
|
#16 |
|
Registered User
Join Date: Nov 2006
Location: KINGSPORT,TN.
Posts: 3,035
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
C&t Strokers Is A Old Crank Company Who Welded Up Cranks To Stroke Them Out. Looks Like This Guy Will Be Happy When He Gets A Billet Crank Now. Also Bet He,s Glad It Happened Off The Line Instead Of On The Top End.....
|
|
|
|
|
12-24-2006, 11:00 PM
|
#17 | |
|
Registered User
Join Date: Oct 2006
Location: Cheney, KS
Posts: 669
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
Missed 3rd and pegged an autometer 11k RPM tach,
This was the first motor I ever spent the little extra to upgrade to titanium retainers. Its didnt break and kept the vavle from falling.
__________________
Quote:
|
|
|
|
|
|
12-24-2006, 11:14 PM
|
#18 | |
|
Chevy truck addict
Join Date: Apr 2005
Location: Thornton Colorado
Posts: 825
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
Quote:
Thats all you broke at 11k. damn! Was it fun?
|
|
|
|
|
|
12-24-2006, 11:21 PM
|
#19 |
|
Having issues
Join Date: Jul 2005
Location: Eldorado Ca, an hour east of sacramento
Posts: 696
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
I have a pic(someplace) of a 360 FE that blew a rod, times 3. It wiped out 3 rods, made 2 pistons all but disappear, bent 2 rods into the shape of a pretzel, but a 1/4" dent into a crank journal, and snapped the can in 2 places. The pan looked like the motor threw up in it.
My first 460 I killed, it lost a valve keeper. It dropped the vavle, bend the head 45* and cracked the piston. My Neighbor first overheated his 460, and cracked a head + the block. I set him up with a lower mileage used 460. He promplty flattened a cam in it. He put in another camshaft, and wondered why the motor rattled so bad. I went and checked it out, the shaft for the oil pump had fallen out of the motor, no oil at all. I fixed the pump, gave him a used cam that I wasnt going to use any more, he hasnt had a lick of problems with it. My old roomate had a 350 that his father in laws son (putz) assembled. It had blown out the side of the piston, the motor barely ran. We took the piston out (no visible damage on the top) and pieces shot from the sides. THe motor had 3 broken rings and 2 damaged pistons. Con rod caps were mixed around, rod nuts looked like vice grips had been used to tighten them. FOrum content, my roomates truck was a 67 LWB C10 Seen a 350 that started rattling hella bad on the way home. It made it home, the owner was showing us the motor, "hey, take a listen to this." He started the motor, I watched as a hole was punched thru the side of the pan when the rod let loose at idle |
|
|
|
|
12-25-2006, 07:12 AM
|
#20 | ||
|
Registered User
Join Date: Oct 2006
Location: Cheney, KS
Posts: 669
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
Quote:
After ditching those weak Crane gold rockers and upgrading to the SS crowers. My car will stand at 9k all day. Only problem is the **** distributors fall apart around around 5k
__________________
Quote:
|
||
|
|
|
|
12-25-2006, 11:15 AM
|
#21 |
|
Just here to help
Join Date: Jan 2002
Location: Norwood,Mo
Posts: 3,890
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
This is my bros 454
|
|
|
|
|
12-25-2006, 11:21 AM
|
#22 |
|
laying low
Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,666
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
Man! It hurts just looking at some of these...
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
|
|
|
|
12-25-2006, 11:26 AM
|
#23 |
|
Broken Down
Join Date: Dec 2006
Location: Choctaw, Oklahoma
Posts: 1,267
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
Well here are some more bad engine pictures, Unfortuantly we purposly destoryed this engine with a couple Incendiary grenades while we were in Iraq can't let the BG geth our stuff.
__________________
kenm78 1982 Chevy 4X4 Project truck  “It’s better to keep your mouth shut and let people wonder about your ignorance, than open your mouth and reveal all doubt” |
|
|
|
|
12-25-2006, 03:08 PM
|
#24 |
|
Account Suspended
Join Date: Aug 2006
Location: vacaville ca, because it as far from indy as i can be
Posts: 775
|
Re: Like Seeing Broken Motor Pictures????? - Check it out.
a donor 454 i was given.
the piston broke loose from the rod and kissed the head a few times, the rod wore a hole in the cylinder wall too. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
