Will this work for us? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

krue · 12-24-2006, 12:37 AM

http://67-72chevytrucks.com/vboard/s...d.php?t=220511

bouncytruck · 12-24-2006, 02:05 AM

The biggest issue I see is that there won't be any way to weld the mounting points in place. You could glass them in, but without some understructure, I'd think they'd break loose fairly quickly.

krue · 12-24-2006, 02:16 AM

Rats, I'll have to cogitate on that.

LUV2XCLR8 · 12-24-2006, 08:12 AM

Hmmmm, seems like there would be a way to make it work, maybe a long
flat bracket that comes up to that point from the bottom mounting area?

**jaros44sr** · 12-24-2006, 08:38 AM

I think if you cut a rectangular hole you could slide a 1/2" pc. of oak in there, then just epoxy and 4 flat head srcews in the corners till the epoxy sets up. Use a nut sert for threads, put a temp. bolt in the threads to hold onto in the mock up stage, and then just cover it up with fibreglass, just my .02

Merry Christmas to all!!! Jim

MNorby · 12-24-2006, 10:50 AM

I've never had a factory blazer top but from what it looks like why couldn't you take a long peice of say 1" wide by 1/8 or so strap and run the length of the side of the hatch and attach with a half doxen screws into the fiberglass then have a spot to attach the mounting ball?

pound41 · 12-24-2006, 01:16 PM

I think MNorby has the right Idea the longer the bar goes down the side the less likely to flex and break the hatch. I am almost postive someone posted a link on how to do this on a blazer. I thought it was someone who had put 02 suburban seats in etc.

kyle4381 · 12-24-2006, 01:38 PM

I might give this a try.. The P.O already has cut some holes in the side of the gate to get to the original bracket that came loose. I think a long strap with the ball mounted 6 screws and a some high grade epoxy this could work... It will be some time before I get to it but If anyone else attempts this I would love to see some pics.

12-24-2006, 12:37 AM	#1
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Will this work for us? http://67-72chevytrucks.com/vboard/s...d.php?t=220511 __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-24-2006, 02:05 AM	#2
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: Will this work for us? The biggest issue I see is that there won't be any way to weld the mounting points in place. You could glass them in, but without some understructure, I'd think they'd break loose fairly quickly. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

12-24-2006, 02:16 AM	#3
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Will this work for us? Rats, I'll have to cogitate on that. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-24-2006, 08:12 AM	#4
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Will this work for us? Hmmmm, seems like there would be a way to make it work, maybe a long flat bracket that comes up to that point from the bottom mounting area? __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

12-24-2006, 08:38 AM	#5
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,762	Re: Will this work for us? I think if you cut a rectangular hole you could slide a 1/2" pc. of oak in there, then just epoxy and 4 flat head srcews in the corners till the epoxy sets up. Use a nut sert for threads, put a temp. bolt in the threads to hold onto in the mock up stage, and then just cover it up with fibreglass, just my .02 Merry Christmas to all!!! Jim __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

12-24-2006, 10:50 AM	#6
MNorby Registered User Join Date: Aug 2006 Location: Powell, Wy Posts: 135	Re: Will this work for us? I've never had a factory blazer top but from what it looks like why couldn't you take a long peice of say 1" wide by 1/8 or so strap and run the length of the side of the hatch and attach with a half doxen screws into the fiberglass then have a spot to attach the mounting ball?

12-24-2006, 01:16 PM	#7
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,268	Re: Will this work for us? I think MNorby has the right Idea the longer the bar goes down the side the less likely to flex and break the hatch. I am almost postive someone posted a link on how to do this on a blazer. I thought it was someone who had put 02 suburban seats in etc.

12-24-2006, 01:38 PM	#8
kyle4381 Senior Member Join Date: Nov 2005 Location: AZ Posts: 416	Re: Will this work for us? I might give this a try.. The P.O already has cut some holes in the side of the gate to get to the original bracket that came loose. I think a long strap with the ball mounted 6 screws and a some high grade epoxy this could work... It will be some time before I get to it but If anyone else attempts this I would love to see some pics. Last edited by kyle4381; 12-24-2006 at 01:38 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.