'67 Chevy 3/4ton project, MN $600.00 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

booth · 01-05-2007, 01:10 PM

I have a '67 Chevy 3/4ton project up for sale. It started life as a inline 6, 4 speed it now has a running 350/350 combo in it. The truck was in very tough shape when I bought it, it now sits in mostly in primmer. the front clip is in pieces right now and I have every bolt for it. 12 bolt rear with new bearings. The motor is a runner, with long tube hooker headers and 650cfm Holly spreadbore carb. I have a van tilt that i think is rebuildable. along with a few more odds and ends. I'll Post pics sometime this weekend. If you are close and want to come see it, post here and we can make arangements. This is a very good deal for the right person. I have to many projects right now and need the space.

I live in Lonsdale, MN
no delivery
$600.00 Firm
Thanks,
Paul

booth · 01-05-2007, 08:33 PM

I'll have Pics by late tomorrow.

IvelDesigns · 01-06-2007, 12:50 PM

lookin' forward to the pics.

What kind of shape is the cab and bed in? any major rust problems? How are the cab mounts? has any suspension work been done to it?

booth · 01-06-2007, 06:26 PM

No bed or title sorry. The cab has new rockers and corners. The floor was, and still is in tough shape. I have a new drivers side patch pannel installed it needs a pass. one. The rear floor was the worst. The old gas tank was the only thing holding up the back of the cab. That's kind of fixed, looks right from the outside.

Other Than that the cab is good no major rust arount the windows. The heater fan and core are all good. The doors need a little work but for $600.00 can't complain to much. I'm still working on pics my Comp. won't work with my camera.

**67 cst swb** · 01-07-2007, 02:48 AM

also looking forward to pics. I am more interested in the engine/trans/runnung gear/rims & tires....
keep me posted...

brak · 01-08-2007, 06:53 PM

ttt

booth · 01-09-2007, 07:35 PM

Here we go maybe.....
Name: Untitled-52.jpg
Views: 297
Size: 40.0 KB

Name: Untitled-59_edited-1.jpg
Views: 297
Size: 58.1 KB

Name: Untitled-61_edited-1.jpg
Views: 296
Size: 63.4 KB

Well I hape that worked. Sorry it took so long.
Paul

**67 cst swb** · 01-10-2007, 03:16 AM

I'm interested... keep me inline behind IvelDesigns...
Thank You

IvelDesigns · 01-10-2007, 10:17 AM

count me out. I would need something with a title

booth · 01-10-2007, 03:59 PM

67 cst your up. I'll PM you with my phone # I am working nights this week so you can call me them if you want.
paul

booth · 01-15-2007, 01:32 AM

Ttt

**67 cst swb** · 01-17-2007, 01:36 AM

Hmmmmm....
You said firm on the price, right?... How long of drive from Lonsdale to Sioux Falls? I know Sioux Falls is about 5-6 hours from me, how much longer would I have to drive...
I'll think about this and PM you later this week.

booth · 01-17-2007, 08:19 AM

Its about 5 hrs my brother lives there. Give me a call maybe I can sweeten the deal...
Paul

donelan07 · 01-17-2007, 01:33 PM

Im interested.. What all comes with the pickup?

booth · 01-17-2007, 06:17 PM

Check you PM. Its a complete truck less the bed basicly the engine does run I just have the carb, headers and wires off when I was doing some body work.

**67 cst swb** · 01-21-2007, 01:25 AM

booth...
I should know by Monday whether my '68 3/4ton 4x4 is Sold or not.
Provided you still have it. I will call you as soon as he lets me know he'll take it. He said if his father-in-law will let him work on it at his place, Then he'll buy it. So, it looks good.

**67 cst swb** · 01-21-2007, 08:35 PM

PM sent...
Sunday evening 6:30 CT...

01-05-2007, 01:10 PM	#1
booth Active Member Join Date: Feb 2003 Location: Lonsdale, MN Posts: 109	'67 Chevy 3/4ton project, MN $600.00 I have a '67 Chevy 3/4ton project up for sale. It started life as a inline 6, 4 speed it now has a running 350/350 combo in it. The truck was in very tough shape when I bought it, it now sits in mostly in primmer. the front clip is in pieces right now and I have every bolt for it. 12 bolt rear with new bearings. The motor is a runner, with long tube hooker headers and 650cfm Holly spreadbore carb. I have a van tilt that i think is rebuildable. along with a few more odds and ends. I'll Post pics sometime this weekend. If you are close and want to come see it, post here and we can make arangements. This is a very good deal for the right person. I have to many projects right now and need the space. I live in Lonsdale, MN no delivery $600.00 Firm Thanks, Paul __________________ '67 Chevy LWB (Running) '67 Chevy LWB (Not Running) '70 Chevy LWB (In Pieces) '72 Chevy LWB (In Pieces)

01-05-2007, 08:33 PM	#2
booth Active Member Join Date: Feb 2003 Location: Lonsdale, MN Posts: 109	Re: '67 Chevy 3/4ton project, MN $600.00 I'll have Pics by late tomorrow. __________________ '67 Chevy LWB (Running) '67 Chevy LWB (Not Running) '70 Chevy LWB (In Pieces) '72 Chevy LWB (In Pieces)

01-06-2007, 12:50 PM	#3
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: '67 Chevy 3/4ton project, MN $600.00 lookin' forward to the pics. What kind of shape is the cab and bed in? any major rust problems? How are the cab mounts? has any suspension work been done to it? __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

01-06-2007, 06:26 PM	#4
booth Active Member Join Date: Feb 2003 Location: Lonsdale, MN Posts: 109	Re: '67 Chevy 3/4ton project, MN $600.00 No bed or title sorry. The cab has new rockers and corners. The floor was, and still is in tough shape. I have a new drivers side patch pannel installed it needs a pass. one. The rear floor was the worst. The old gas tank was the only thing holding up the back of the cab. That's kind of fixed, looks right from the outside. Other Than that the cab is good no major rust arount the windows. The heater fan and core are all good. The doors need a little work but for $600.00 can't complain to much. I'm still working on pics my Comp. won't work with my camera. __________________ '67 Chevy LWB (Running) '67 Chevy LWB (Not Running) '70 Chevy LWB (In Pieces) '72 Chevy LWB (In Pieces)

01-07-2007, 02:48 AM	#5
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: '67 Chevy 3/4ton project, MN $600.00 also looking forward to pics. I am more interested in the engine/trans/runnung gear/rims & tires.... keep me posted... __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

01-08-2007, 06:53 PM	#6
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: '67 Chevy 3/4ton project, MN $600.00 ttt __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill

01-09-2007, 07:35 PM	#7
booth Active Member Join Date: Feb 2003 Location: Lonsdale, MN Posts: 109	Re: '67 Chevy 3/4ton project, MN $600.00 Here we go maybe..... Well I hape that worked. Sorry it took so long. Paul __________________ '67 Chevy LWB (Running) '67 Chevy LWB (Not Running) '70 Chevy LWB (In Pieces) '72 Chevy LWB (In Pieces)

01-10-2007, 03:16 AM	#8
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: '67 Chevy 3/4ton project, MN $600.00 I'm interested... keep me inline behind IvelDesigns... Thank You __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

01-10-2007, 10:17 AM	#9
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: '67 Chevy 3/4ton project, MN $600.00 count me out. I would need something with a title __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

01-10-2007, 03:59 PM	#10
booth Active Member Join Date: Feb 2003 Location: Lonsdale, MN Posts: 109	Re: '67 Chevy 3/4ton project, MN $600.00 67 cst your up. I'll PM you with my phone # I am working nights this week so you can call me them if you want. paul __________________ '67 Chevy LWB (Running) '67 Chevy LWB (Not Running) '70 Chevy LWB (In Pieces) '72 Chevy LWB (In Pieces)

01-15-2007, 01:32 AM	#11
booth Active Member Join Date: Feb 2003 Location: Lonsdale, MN Posts: 109	Re: '67 Chevy 3/4ton project, MN $600.00 Ttt __________________ '67 Chevy LWB (Running) '67 Chevy LWB (Not Running) '70 Chevy LWB (In Pieces) '72 Chevy LWB (In Pieces)

01-17-2007, 01:36 AM	#12
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: '67 Chevy 3/4ton project, MN $600.00 Hmmmmm.... You said firm on the price, right?... How long of drive from Lonsdale to Sioux Falls? I know Sioux Falls is about 5-6 hours from me, how much longer would I have to drive... I'll think about this and PM you later this week. __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

01-17-2007, 08:19 AM	#13
booth Active Member Join Date: Feb 2003 Location: Lonsdale, MN Posts: 109	Re: '67 Chevy 3/4ton project, MN $600.00 Its about 5 hrs my brother lives there. Give me a call maybe I can sweeten the deal... Paul __________________ '67 Chevy LWB (Running) '67 Chevy LWB (Not Running) '70 Chevy LWB (In Pieces) '72 Chevy LWB (In Pieces)

01-17-2007, 01:33 PM	#14
donelan07 Active Member Join Date: Dec 2004 Location: Brookings, SD Posts: 202	Re: '67 Chevy 3/4ton project, MN $600.00 Im interested.. What all comes with the pickup? __________________ _________________________________ 1972 Chevy SWB 4x4 350 4speed

01-17-2007, 06:17 PM	#15
booth Active Member Join Date: Feb 2003 Location: Lonsdale, MN Posts: 109	Re: '67 Chevy 3/4ton project, MN $600.00 Check you PM. Its a complete truck less the bed basicly the engine does run I just have the carb, headers and wires off when I was doing some body work. __________________ '67 Chevy LWB (Running) '67 Chevy LWB (Not Running) '70 Chevy LWB (In Pieces) '72 Chevy LWB (In Pieces)



Register or Log In To remove these advertisements.

01-21-2007, 01:25 AM	#16
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: '67 Chevy 3/4ton project, MN $600.00 booth... I should know by Monday whether my '68 3/4ton 4x4 is Sold or not. Provided you still have it. I will call you as soon as he lets me know he'll take it. He said if his father-in-law will let him work on it at his place, Then he'll buy it. So, it looks good. __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

01-21-2007, 08:35 PM	#17
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: '67 Chevy 3/4ton project, MN $600.00 PM sent... Sunday evening 6:30 CT... __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

Register or Log In To remove these advertisements.