need factory ac dash vent template - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bucket · 01-10-2007, 07:27 PM

i am restoring a non-ac cab for a truck that is going to use old or vintage air. i want to use the factory vents. does anyone have a cutout template for the center & side vents?

**john** · 01-10-2007, 07:52 PM

PM me your address and will send some. They dont come out the right size if I post or email them.

see ten · 01-10-2007, 08:54 PM

I think you can download the template from the Surefit instructions on the Vintage Air site. I could be wrong, but it seems like this question came up a while back and that was their final solution.

**john** · 01-10-2007, 09:40 PM

This is what they look like. I have the center one too.

bucket · 01-10-2007, 09:41 PM

thanks john! pm sent.

i looked on the vintage air site. they had the templates but they were for their vents, not the factory.....or are they all the same?

Draggn66 · 01-10-2007, 09:43 PM

Here's the link for the instructions. The templates are towards the end.

http://www.vintageair.com/DownloadsS...ols)%20Ine.pdf

see ten · 01-10-2007, 10:08 PM

Quote:

Originally Posted by bucket

thanks john! pm sent.

i looked on the vintage air site. they had the templates but they were for their vents, not the factory.....or are they all the same?

Their template for the center vent is the same.

Draggn66 · 01-10-2007, 10:56 PM

Yea the link I gave you has the template for the center vent. Those are the same. Figured since John was sending you the templates for the side vents you could get started with the center vent. I searched their site as well and couldn't find the side vent templates you were looking for.

bucket · 01-10-2007, 11:01 PM

thanks again john.

thanks see ten and draggn66!

cameeks · 01-13-2007, 11:02 AM

Thanks John for some reason I was thiking I was going to have to swap out the dash panel.

01-10-2007, 07:27 PM	#1
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	need factory ac dash vent template i am restoring a non-ac cab for a truck that is going to use old or vintage air. i want to use the factory vents. does anyone have a cutout template for the center & side vents?

01-10-2007, 07:52 PM	#2
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: need factory ac dash vent template PM me your address and will send some. They dont come out the right size if I post or email them. __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

01-10-2007, 08:54 PM	#3
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: need factory ac dash vent template I think you can download the template from the Surefit instructions on the Vintage Air site. I could be wrong, but it seems like this question came up a while back and that was their final solution.

01-10-2007, 09:40 PM	#4
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: need factory ac dash vent template This is what they look like. I have the center one too. Attached Images __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/ Last edited by john; 01-10-2007 at 09:41 PM.

01-10-2007, 09:41 PM	#5
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	Re: need factory ac dash vent template thanks john! pm sent. i looked on the vintage air site. they had the templates but they were for their vents, not the factory.....or are they all the same?

01-10-2007, 09:43 PM	#6
Draggn66 Wrenchin & Sandin!!! Join Date: Aug 2006 Location: Joliet, IL. Posts: 523	Re: need factory ac dash vent template Here's the link for the instructions. The templates are towards the end. http://www.vintageair.com/DownloadsS...ols)%20Ine.pdf __________________ Randy Shorewood, IL. My Favorite eBay Searches My Driver Restore Thread 1971 C10 Longbed 2005 Silverado Shortbed 2005 FXDWG Last edited by Draggn66; 01-10-2007 at 10:57 PM.

01-10-2007, 10:56 PM	#8
Draggn66 Wrenchin & Sandin!!! Join Date: Aug 2006 Location: Joliet, IL. Posts: 523	Re: need factory ac dash vent template Yea the link I gave you has the template for the center vent. Those are the same. Figured since John was sending you the templates for the side vents you could get started with the center vent. I searched their site as well and couldn't find the side vent templates you were looking for. __________________ Randy Shorewood, IL. My Favorite eBay Searches My Driver Restore Thread 1971 C10 Longbed 2005 Silverado Shortbed 2005 FXDWG Last edited by Draggn66; 01-10-2007 at 10:57 PM.

01-10-2007, 11:01 PM	#9
bucket Registered User Join Date: Aug 2001 Location: Shawnee, KS Posts: 923	Re: need factory ac dash vent template thanks again john. thanks see ten and draggn66!

01-13-2007, 11:02 AM	#10
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: need factory ac dash vent template Thanks John for some reason I was thiking I was going to have to swap out the dash panel. __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.