What did everyone get done this weekend? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1969k10stepside · 01-14-2007, 07:13 PM

I havent done this in awhile and no one else has done it lately so I would start doing this again...
What did y'all get done this weekend?
I did some more work on the shortbed 4x4.I took out ball joints,replaced u joints and tore apart the front axle of the 4x4 to rebuild.

LUV2XCLR8 · 01-14-2007, 07:18 PM

Nuthing on the weekend, but I got alot of Air leaks figured out on Friday

BarryB · 01-14-2007, 07:38 PM

Well I got my rafters in for a carport i am building

Aarons72s · 01-14-2007, 07:38 PM

Built model cars. Hay I am iced in and needed someting to do automotive related. lol

kenm78 · 01-14-2007, 07:46 PM

Got the bumper and grille of my winnie, and then started removing all the components on my 71 dash. Boy its nice and icy here...

68shortfleet · 01-14-2007, 08:00 PM

I took all the power steering parts from the 71 parts truck into work and ran them through the solvent tank. They were very greasy and i didnt want to deal with them. Now they are nice and clean.

Jason

krue · 01-14-2007, 08:08 PM

A friend and I bought a couple of 200's (one for his ta and one for my truck) and installed one in his Trans Am. Drug home a 70 C-20 with 396/400 for free.

Then worked Sat and Sunday.

Aarons72s · 01-14-2007, 08:12 PM

Man Krue you made out this weekend. Congrats on the tranny and truck.

67Mach1 · 01-14-2007, 08:13 PM

worked pretty much all weekend on decking my attic over my three car garage.... Lots of work but now I have tons of storage and can drop that %50.00 a month storage place. Been paying on it for about two years now.

Damn what a waste of $....

65-72 chevytoys · 01-14-2007, 08:19 PM

I had to work on Sat and spent this afternoon with the girlfirend and she is still PO'ed so the weekend was a bust for me. I had plan on looking at a 2wd blazer but I decided to spend with the gf as a priority and she left pissed anyway. Looks like I can buy what I want again.

**68350** · 01-14-2007, 08:20 PM

I tore down my 402 that I'm putting in my gmc shortbox. Found out it's been rebuilt, bored .060 over. Man, I was HAPPY!! I only payed 250 bucks for the 71 chevy with this motor in it. Now I will order my parts for it. I am psyched!!

My dad painted the underside of his hood, stepside brackets, radiator support, and another part I can't recall, all in black. A pretty good weekend for the gmc shortboxes.

pcmcobra · 01-14-2007, 08:29 PM

got my front end apart. control arms are at powdercoat right now, hope to get them back wed or thur. Then hopefully get everything reassembled.

**Palf70Step** · 01-14-2007, 08:37 PM

I got my fuel filler installed in my bed. Had soccer games and worked on the daughter's Bonneville (tranny coming soon

) I also spent some time on the DD (dumb D#dge) looking for coolant leak. She goes into the dealer tomorrow for warranty work. Hung out with the wife and kids, as the two ladies hit the road back to school and training tomorrow.

corn · 01-14-2007, 08:53 PM

I pretty much sat on this board all weekend. Absolutely nothing on the truck though...

chevybill · 01-14-2007, 09:03 PM

I put some edelbrock IAS shocks on my 2000 superduty, worked with my show mare in the roundpen and removed a bad wheel stud from the front disc kit on my 70 c-10. Winter is supposed to return to MS tonight and tomorrow.

70 net440 · 01-14-2007, 09:06 PM

Helped my son put the carpet in his '71. That was the last thing in the big box of parts he ordered for it.

PanelDeland · 01-14-2007, 09:08 PM

Worked sat.changed the oil in my DD(Dodge Dakota) today and loafed on here and in front of the tube.Back to the grind tommorow.Anyone got the day off?

jbon64 · 01-14-2007, 09:16 PM

my original plans were to head to tennessee to check out a 72 SWB . weather forecast called for an ice storm so i stayed put (as it turns out the ice missed me and my planned route...dang it !!! ) . ended up making a table for my girlfriend then putting together a parts washer i bought for myself

poorboy · 01-14-2007, 09:22 PM

I built a fence in my backyard and started my seat swap. Here's some pics. http://67-72chevytrucks.com/vboard/s...d.php?t=223263

Texasdeere · 01-14-2007, 10:11 PM

I picked up my rally wheels from powder coat on Friday. New rear brakes including new drums + wheels cylinders + hardware kits, still need to bleed. New rotors, bearings & seals up front. Still need to install the new calipers and bleed. Waiting on new master cylinder to arrive. The brake system turned out to be an expensive undertaking, but it was nice to be able to work on the truck for a change.

Almost forgot, Had the tires swapped from the 5-Star Wheels to the Rallys on Sat.

Troy-Built · 01-14-2007, 10:21 PM

I finished stripping my 68 cab out to send to media blast Friday night. I started tearing the 71 short bed down to send the frame to get powder coated for the 68. The dog house is off now and the cab is ready to pull off. Hope to have it ready for the powder coater Thursday.

skokie · 01-14-2007, 10:32 PM

I pulled my 68 in the driveway so I can start working on it tomorrow. I did adjust the fast idle on it though

ntroach454 · 01-14-2007, 10:38 PM

Went to a car show on saturday. Bought a new gas pedal, stainless trim, and brake pedal pad from a local vendor. And play some video games with my daughter.

agronomya · 01-14-2007, 11:11 PM

I bought my 1969 2wd LWB on Friday and got the engine compartment cleaned up a little. Ordered a manual steering box from billbowtie on the boards here and have been looking for a gas pedal/throttle assembly the rest of the time. I also did a lot of brain storming. I would have liked to have driven my new toy a lot more this weekend but it hasn't gone above 28 degrees since Friday afternoon and we're covered in about an inch of ice. Also found out she doesn't like to start in the cold (at all!).

brak · 01-14-2007, 11:23 PM

I managed to lock myself inside my truck for about an hour, with no jacket (temp was the mid to high 20's)...

The other day i put my door panels back on, but not the inside levers.
Today I hopped into my truck for a second to get the registration out of the glove box, and the door slammed shut...

i had no tools in the truck to remove the door panels, and the latch is too tight to turn by hand...

finally my wife got home and let me out...

She's still laughing at me

01-14-2007, 07:13 PM	#1
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	What did everyone get done this weekend? I havent done this in awhile and no one else has done it lately so I would start doing this again... What did y'all get done this weekend? I did some more work on the shortbed 4x4.I took out ball joints,replaced u joints and tore apart the front axle of the 4x4 to rebuild.

01-14-2007, 07:18 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: What did everyone get done this weekend? Nuthing on the weekend, but I got alot of Air leaks figured out on Friday __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

01-14-2007, 07:38 PM	#3
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: What did everyone get done this weekend? Well I got my rafters in for a carport i am building

01-14-2007, 07:38 PM	#4
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,669	Re: What did everyone get done this weekend? Built model cars. Hay I am iced in and needed someting to do automotive related. lol

01-14-2007, 07:46 PM	#5
kenm78 Broken Down Join Date: Dec 2006 Location: Choctaw, Oklahoma Posts: 1,267	Re: What did everyone get done this weekend? Got the bumper and grille of my winnie, and then started removing all the components on my 71 dash. Boy its nice and icy here... __________________ kenm78 1982 Chevy 4X4 Project truck “It’s better to keep your mouth shut and let people wonder about your ignorance, than open your mouth and reveal all doubt”

01-14-2007, 08:00 PM	#6
68shortfleet Registered User Join Date: Oct 2006 Location: Dundee, Oregon Posts: 311	Re: What did everyone get done this weekend? I took all the power steering parts from the 71 parts truck into work and ran them through the solvent tank. They were very greasy and i didnt want to deal with them. Now they are nice and clean. Jason

01-14-2007, 08:08 PM	#7
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: What did everyone get done this weekend? A friend and I bought a couple of 200's (one for his ta and one for my truck) and installed one in his Trans Am. Drug home a 70 C-20 with 396/400 for free. Then worked Sat and Sunday. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

01-14-2007, 08:12 PM	#8
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,669	Re: What did everyone get done this weekend? Man Krue you made out this weekend. Congrats on the tranny and truck.

01-14-2007, 08:13 PM	#9
67Mach1 Senior Member Join Date: Nov 2005 Location: Round Rock, TX Posts: 1,100	Re: What did everyone get done this weekend? worked pretty much all weekend on decking my attic over my three car garage.... Lots of work but now I have tons of storage and can drop that %50.00 a month storage place. Been paying on it for about two years now. Damn what a waste of $.... __________________ Soon to be selling all but one, or two... Depends on what the Boss has to say....... 67 GMC Shortbed 454 Project more junk and most of it is for sale

01-14-2007, 08:19 PM	#10
65-72 chevytoys Registered User Join Date: Dec 2006 Location: Wesley Chapel, Florida Posts: 1,113	Re: What did everyone get done this weekend? I had to work on Sat and spent this afternoon with the girlfirend and she is still PO'ed so the weekend was a bust for me. I had plan on looking at a 2wd blazer but I decided to spend with the gf as a priority and she left pissed anyway. Looks like I can buy what I want again.

01-14-2007, 08:20 PM	#11
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: What did everyone get done this weekend? I tore down my 402 that I'm putting in my gmc shortbox. Found out it's been rebuilt, bored .060 over. Man, I was HAPPY!! I only payed 250 bucks for the 71 chevy with this motor in it. Now I will order my parts for it. I am psyched!! My dad painted the underside of his hood, stepside brackets, radiator support, and another part I can't recall, all in black. A pretty good weekend for the gmc shortboxes. __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

01-14-2007, 08:29 PM	#12
pcmcobra Registered User Join Date: Aug 2006 Location: Florida Posts: 1,684	Re: What did everyone get done this weekend? got my front end apart. control arms are at powdercoat right now, hope to get them back wed or thur. Then hopefully get everything reassembled.

01-14-2007, 08:37 PM	#13
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,269	Re: What did everyone get done this weekend? I got my fuel filler installed in my bed. Had soccer games and worked on the daughter's Bonneville (tranny coming soon ) I also spent some time on the DD (dumb D#dge) looking for coolant leak. She goes into the dealer tomorrow for warranty work. Hung out with the wife and kids, as the two ladies hit the road back to school and training tomorrow. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

01-14-2007, 08:53 PM	#14
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: What did everyone get done this weekend? I pretty much sat on this board all weekend. Absolutely nothing on the truck though...

01-14-2007, 09:03 PM	#15
chevybill Senior Member Join Date: Oct 2004 Location: calhoun city ms Posts: 940	Re: What did everyone get done this weekend? I put some edelbrock IAS shocks on my 2000 superduty, worked with my show mare in the roundpen and removed a bad wheel stud from the front disc kit on my 70 c-10. Winter is supposed to return to MS tonight and tomorrow. __________________ ongoing 1970 c 10 lwb 1994 z-28 few mods.-owned since new 1978 vette silver/grey 25th anniv. paint



Register or Log In To remove these advertisements.

01-14-2007, 09:06 PM	#16
70 net440 Junior Member Join Date: Sep 2003 Location: yreka, ca Posts: 270	Re: What did everyone get done this weekend? Helped my son put the carpet in his '71. That was the last thing in the big box of parts he ordered for it. __________________ 63 C10 70 Coronet R/T 67 C10 70 Dart Swinger 71 K10

01-14-2007, 09:08 PM	#17
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: What did everyone get done this weekend? Worked sat.changed the oil in my DD(Dodge Dakota) today and loafed on here and in front of the tube.Back to the grind tommorow.Anyone got the day off? __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

01-14-2007, 09:16 PM	#18
jbon64 Registered User Join Date: Jan 2006 Location: sidney , illinois Posts: 312	Re: What did everyone get done this weekend? my original plans were to head to tennessee to check out a 72 SWB . weather forecast called for an ice storm so i stayed put (as it turns out the ice missed me and my planned route...dang it !!! ) . ended up making a table for my girlfriend then putting together a parts washer i bought for myself __________________ hey.....smell my finger 64 nova wagon , 63 nova convertible

01-14-2007, 09:22 PM	#19
poorboy Senior Member Join Date: Jun 2006 Location: Oregon City, Or Posts: 758	Re: What did everyone get done this weekend? I built a fence in my backyard and started my seat swap. Here's some pics. http://67-72chevytrucks.com/vboard/s...d.php?t=223263

01-14-2007, 10:11 PM	#20
Texasdeere Registered User Join Date: Sep 2006 Location: League City, Texas Posts: 732	Re: What did everyone get done this weekend? I picked up my rally wheels from powder coat on Friday. New rear brakes including new drums + wheels cylinders + hardware kits, still need to bleed. New rotors, bearings & seals up front. Still need to install the new calipers and bleed. Waiting on new master cylinder to arrive. The brake system turned out to be an expensive undertaking, but it was nice to be able to work on the truck for a change. Almost forgot, Had the tires swapped from the 5-Star Wheels to the Rallys on Sat. Last edited by Texasdeere; 01-14-2007 at 10:52 PM.

01-14-2007, 10:21 PM	#21
Troy-Built Registered User Join Date: Mar 2003 Location: Perrysville Indiana Posts: 258	Re: What did everyone get done this weekend? I finished stripping my 68 cab out to send to media blast Friday night. I started tearing the 71 short bed down to send the frame to get powder coated for the 68. The dog house is off now and the cab is ready to pull off. Hope to have it ready for the powder coater Thursday. __________________ 69 Chevelle SS 375/396 TKO 600 71 Suburban 3/4 4x4 402 5-speed (project) 68 chevy C10 shortbed 327 5-speed (project) 72 Blazer 4x4 400 4-speed (wifes project) Numerous 67-72 parts trucks

01-14-2007, 10:32 PM	#22
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,354	Re: What did everyone get done this weekend? I pulled my 68 in the driveway so I can start working on it tomorrow. I did adjust the fast idle on it though __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

01-14-2007, 10:38 PM	#23
ntroach454 Registered User Join Date: Aug 2006 Location: Knoxville Posts: 27	Re: What did everyone get done this weekend? Went to a car show on saturday. Bought a new gas pedal, stainless trim, and brake pedal pad from a local vendor. And play some video games with my daughter.

01-14-2007, 11:11 PM	#24
agronomya Junior Member Join Date: Jan 2007 Location: Lubbock, TX Posts: 77	Re: What did everyone get done this weekend? I bought my 1969 2wd LWB on Friday and got the engine compartment cleaned up a little. Ordered a manual steering box from billbowtie on the boards here and have been looking for a gas pedal/throttle assembly the rest of the time. I also did a lot of brain storming. I would have liked to have driven my new toy a lot more this weekend but it hasn't gone above 28 degrees since Friday afternoon and we're covered in about an inch of ice. Also found out she doesn't like to start in the cold (at all!). __________________ They call me, "AA." 1969 Chevy LWB-SDPC 350, TH400, old farm truck http://s123.photobucket.com/albums/o299/agronomya/ 2006 Nissan Altima-For my 2000 miles a month

01-14-2007, 11:23 PM	#25
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: What did everyone get done this weekend? I managed to lock myself inside my truck for about an hour, with no jacket (temp was the mid to high 20's)... The other day i put my door panels back on, but not the inside levers. Today I hopped into my truck for a second to get the registration out of the glove box, and the door slammed shut... i had no tools in the truck to remove the door panels, and the latch is too tight to turn by hand... finally my wife got home and let me out... She's still laughing at me __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill Last edited by brak; 01-14-2007 at 11:24 PM.

Register or Log In To remove these advertisements.