|
01-23-2007, 05:57 PM
|
#1 |
|
Registered User
Join Date: Aug 2006
Location: Chicago
Posts: 38
|
Spare and Jack
I have a 1966 Chevy Longbed and have not been able to determine where the spare tire and related jacking/wrenching equipment was originally stored on these trucks.
I searched this board, but found no results. Anyone know where the spare and jacking equipment was originally stored? Any photos of the jack and wrench and/or handle? Or was this back in the day when men were men and just had their old lady hop out and lift the truck up in the air while he removed the lugnuts with his teeth? Any information is appreciated. S-D Last edited by Swerve-Driver; 01-23-2007 at 05:57 PM. |
|
|
|
01-23-2007, 09:24 PM
|
#2 |
|
Junior Member
Join Date: Dec 2006
Location: Newburgh, IN
Posts: 1,247
|
Re: Spare and Jack
Not sure about the spare, although I suspect my grandpa carried his in the bed!
 The jack and tire tool were mounted under the seat and held in place with a spring. I can't take any pics of under the seat, but could take some of the jack and tool if that will help.
|
|
|
|
|
01-23-2007, 09:52 PM
|
#3 |
|
Junior Member
Join Date: Dec 2006
Location: Newburgh, IN
Posts: 1,247
|
Re: Spare and Jack
Rotate this pdf pic clockwise one time. Mine is like the one in the top left after you do that.
|
|
|
|
|
01-23-2007, 10:36 PM
|
#4 |
|
Junior Member
Join Date: Dec 2006
Location: Newburgh, IN
Posts: 1,247
|
Re: Spare and Jack
sorry,
i'll try to attach again.... |
|
|
|
|
01-24-2007, 07:48 PM
|
#5 |
|
Cantankerous Geezer
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,264
|
Re: Spare and Jack
Dad's 64 had the jack, handle and wrench stored under the hood on the right fender. The jack handle went up under the battery tray, iirc. The spare on fleetsides was under the bed, just ahead of the bumper. On stepsides the spare was usually side-mount
__________________
Fred There is no such thing as too much cam...just not enough engine. 
|
|
|
|
|
01-31-2007, 03:36 PM
|
#6 |
|
Registered User
Join Date: Aug 2006
Location: Chicago
Posts: 38
|
Re: Spare and Jack
I see- thanks for the drawing and info-
Much appreciated. I get the feeling the jack and handle will be tough to come across. Thanks- S-D |
|
|
|
|
01-31-2007, 08:56 PM
|
#7 |
|
Registered User
Join Date: Aug 2003
Location: stallings,nc
Posts: 401
|
Re: Spare and Jack
my 64 short stepside had the spare under the bed until it got in the way of the trailer hitch.
__________________
1964 c10 short step 1962 econoline van 1989 rs camaro 2006 yamaha vino 125 1975 goldwing |
|
|
|
|
02-02-2007, 06:14 AM
|
#8 |
|
Registered User
Join Date: Aug 2003
Location: tool box
Posts: 3,115
|
Re: Spare and Jack
Jack stuff:
image of the bottom of the cab, with the seat removed, shows stock jack location with jack. Under the driver seat. this picture was sent to me by someone several years ago. this is a picture of the same type retainer spring, which is seen in the above picture holding the jack in place The jack was a 'bottle type' jack. You can probably find one used. I just bought a hydraulic jack and stuck it in the same place. ---- the under the bed spare tire pictures: Woogeroo photo album at google... click on '1965 chevrolet stepside pickup under the bed spare tire setup' these pictures are from when I was checking out how the part mounts on my truck. I have an issue with the exhaust routing, but I plan to get new exhaust eventually. This gives you a good idea of where the stock under the bed unit goes and how it looks. I've been told that arm there was used for a long time on chevy trucks for under the bed spare tire securing. hope this helps... -W p.s. the only vehicle that is mine in any of those pictures is my old truck... the rest are from car shows or belong to my family.... or I saw them for sale on the side of the road.  (if links above are broken, check out the links in my signature line) Last edited by Woogeroo; 12-24-2007 at 03:32 AM. Reason: p.s. |
|
|
|
|
02-03-2007, 07:38 PM
|
#9 |
|
Registered User
Join Date: Aug 2006
Location: Chicago
Posts: 38
|
Re: Spare and Jack
Cool- thanks. I know what to keep an eye out for now.
I appreciate the help. I'll probably spend 3 years looking for that jack, handle and spare bracket although my Dad has probably thrown 20 of them on the scrap iron pile over the last 30 years. Ah well, it will keep me busy and out of trouble. Thanks, S-D |
|
|
|
|
02-04-2007, 09:32 PM
|
#10 |
|
Cantankerous Geezer
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,264
|
Re: Spare and Jack
Keep checking the classifieds here for the jack and handle. The 67-72 trucks used the same one. At the stovebolt site there is a guy called RJ from Colorado that has a lot of 60-66 trucks and parts. He will probably have the jack, handle and brackets. I've been guilty of selling some myself in years past.
__________________
Fred There is no such thing as too much cam...just not enough engine.
|
|
|
|
|
02-12-2007, 06:57 PM
|
#11 |
|
Registered User
Join Date: Aug 2006
Location: Chicago
Posts: 38
|
Re: Spare and Jack
In touch with RJ and he is hooking me up-
Thanks all for the info- S-D |
|
|
|
|
02-27-2010, 03:56 PM
|
#12 |
|
Registered User
Join Date: Jan 2009
Location: Bremerton WA across from Seattle
Posts: 3
|
Re: Spare and Jack
These jacks were used for many years, I had a 78 with the same bottle jack and folding jack handle
|
|
|
|
|
02-27-2010, 11:22 PM
|
#13 |
|
Account Suspended
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
|
Re: Spare and Jack
The fleetside trucks had two options for the spare tire mounting location...underbed or in the bed, as shown in the attached photos.
The only location, noted in the factory manuals for the jack, lug wrench and folding jack handle, was under the seat on the driver side. |
|
|
|
|
02-28-2010, 09:02 AM
|
#14 |
|
"Where were you in '62?"
 
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
|
Re: Spare and Jack
I think we have a few in the shop. I will check after church.
__________________
PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN  "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. |
|
|
|
|
02-28-2010, 12:38 PM
|
#15 |
|
Registered User
 
Join Date: Sep 2006
Location: San Francisco
Posts: 4,782
|
Re: Spare and Jack
I think i have one of those jacks floating around in the 66. I really didn't look to see if I had the handle though.
__________________
"A man and his truck, what a beautiful thing" 65 Short Fleetside BBC 65 Long Fleetside 283 3 on the tree for now. my build thread http://www.67-72chevytrucks.com/vboa...d.php?t=259536 |
|
|
|
|
03-01-2010, 07:22 AM
|
#16 |
|
"Where were you in '62?"
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
|
Re: Spare and Jack
60-66 chevy under seat jack holders:
http://67-72chevytrucks.com/vboard/s...d.php?t=349419 1960-1962 Chevy C-10 Spare Tire Holder: http://67-72chevytrucks.com/vboard/s...d.php?t=349422 I will check on the Jack. I still had the jack bottle... I think. May have sold it. I will check today.
__________________
PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. |
|
|
|
|
03-01-2010, 11:41 PM
|
#17 |
|
Registered User
Join Date: Aug 2006
Location: Chicago
Posts: 38
|
Re: Spare and Jack
Holy Smoke! Stop the presses-- this thread is back from the dead!
I was able to find a jack and handle shortly after my original post back in January 2007. The photos, diagrams and additional info are appreciated- just don't want anyone rummaging through their garage on my behalf as I was able to find a jack a while ago-- Thanks to all for the info- S-D |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
