Bench Seat Console Pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Draggn66 · 01-26-2007, 06:19 PM

Anybody got one? Looking for something to hold my coffe, sunglasses & things. I've found a few bench seat consoles that attach to the seat with the center belt. They look ok in the pics but I'd really like to see something actually mounted in one of our trucks. Anybody?

jimmydean · 01-26-2007, 06:50 PM

I use a roll of duct tape, holds my coffee and it sticks to the floor. Some day I will get something a bit nicer.

My shifter was bent by the PO to clear the under dash AC unit, so I don't have a lot of clearance.

Draggn66 · 01-26-2007, 07:09 PM

Yea I did the duct tape thing for a while also. But now that I've finished my interior I'm wantin to upgrade a bit. Thinkin something like this only in black.

larry may · 01-26-2007, 08:09 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=192593

Draggn66 · 01-26-2007, 09:12 PM

Quote:

Originally Posted by larry may

http://67-72chevytrucks.com/vboard/s...d.php?t=192593

Yea I saw that link. But I'm lookin for more of a "sit on the seat" kinda console for my bench.

xmitsu10 · 01-26-2007, 09:13 PM

Simple and cheap from another member. http://67-72chevytrucks.com/vboard/s...ghlight=holder

I found this identical cupholder at Walmart cheap. Haven't made the brackets yet (it's a winter project). It may not be what you are looking for but it's gonna work perfect for me (hold the coffee or soda on the way to and from the car shows, then remove it and hide during the show).

Mark

Billhilly · 01-27-2007, 12:04 AM

I have bought one of these for my truck, kinda unused at the moment, but when I get my truck going........oh and they work okey on LHD trucks as well!
Here's the linky - http://www.jcwhitney.com/autoparts/I...D:100000278255
Two adjustable cup holders, and CD's, sunglass's etc out of sight. Somewhere to put the junk in my truck!

corn · 01-27-2007, 02:21 AM

I bought a cup holder from walmart that fastens to the front of the seat for my '89. I found it at walmart for @$5! Ill post a pic of it here for you tomorrow...

I just noticed. Mine is identical to the one xmitsu10 posted above...

stynchrr · 01-27-2007, 09:12 AM

Hey I done help on the console but i was wondering where you got your seat cover.
Thanks
Tim

JAKES 68GMC · 01-27-2007, 10:32 AM

RH drive 67-72! Thats pretty cool!

Draggn66 · 01-27-2007, 01:32 PM

Quote:

Originally Posted by stynchrr

Hey I done help on the console but i was wondering where you got your seat cover.
Thanks
Tim

Had the cover made at http://www.ricksupholstery.com Nice work and good prices

stynchrr · 01-27-2007, 02:32 PM

Thanks, They look like what i am looking for. I didn't see any prices on there site if you don't mind what do they run. Do you think the material they use is thicker than the stock reproductions?
Tim

Draggn66 · 01-27-2007, 04:02 PM

Quote:

Originally Posted by stynchrr

Thanks, They look like what i am looking for. I didn't see any prices on there site if you don't mind what do they run. Do you think the material they use is thicker than the stock reproductions?
Tim

My cover set me back $220 shipped. As far as the thickness I'm not sure. My stock cover was cloth and this one is vinyl so I don't have anything to compare to. It is very well made and fits good.

stynchrr · 01-29-2007, 10:44 AM

Thanks for the info. I really like the way your seat(and whole interior) looks and for the extra money I think that is the way I am going to go.
Tim

cstanley · 01-29-2007, 10:56 AM

here's what i did, which works really well and would keep your bench very clean looking...but it doesn't sit on the seat...
http://www.67-72chevytrucks.com/vboa...ghlight=wedgie

bouncytruck · 01-29-2007, 12:14 PM

What about one of these?

http://www.classicheartbeat.com/cata...p%20Holder.htm

Blue'72 · 01-29-2007, 12:27 PM

Oooo, I like that cupholder idea!

GMCBubba · 01-29-2007, 01:09 PM

unfortunately, the 40oz bladder busters aren't going to fit in the ash tray cupholder. but it's something

Idaho Outlaw · 01-29-2007, 01:43 PM

Quote:

Originally Posted by bouncytruck

What about one of these?

http://www.classicheartbeat.com/cata...p%20Holder.htm

Does anyone have this setup in their pickup? If so, can you fit 20oz. pop bottles in it? Or does it only hold can's?

Sport/Truck · 01-29-2007, 02:40 PM

Quote:

Originally Posted by jimmydean

I use a roll of duct tape, holds my coffee and it sticks to the floor. Some day I will get something a bit nicer.

My shifter was bent by the PO to clear the under dash AC unit, so I don't have a lot of clearance.

Didn’t I see that in the "redneck cowl hood" thread?

01-26-2007, 06:19 PM	#1
Draggn66 Wrenchin & Sandin!!! Join Date: Aug 2006 Location: Joliet, IL. Posts: 523	Bench Seat Console Pics Anybody got one? Looking for something to hold my coffe, sunglasses & things. I've found a few bench seat consoles that attach to the seat with the center belt. They look ok in the pics but I'd really like to see something actually mounted in one of our trucks. Anybody? __________________ Randy Shorewood, IL. My Favorite eBay Searches My Driver Restore Thread 1971 C10 Longbed 2005 Silverado Shortbed 2005 FXDWG

01-26-2007, 06:50 PM	#2
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Bench Seat Console Pics I use a roll of duct tape, holds my coffee and it sticks to the floor. Some day I will get something a bit nicer. My shifter was bent by the PO to clear the under dash AC unit, so I don't have a lot of clearance. Last edited by jimmydean; 01-26-2007 at 06:50 PM.

01-26-2007, 07:09 PM	#3
Draggn66 Wrenchin & Sandin!!! Join Date: Aug 2006 Location: Joliet, IL. Posts: 523	Re: Bench Seat Console Pics Yea I did the duct tape thing for a while also. But now that I've finished my interior I'm wantin to upgrade a bit. Thinkin something like this only in black. Attached Images __________________ Randy Shorewood, IL. My Favorite eBay Searches My Driver Restore Thread 1971 C10 Longbed 2005 Silverado Shortbed 2005 FXDWG

01-26-2007, 08:09 PM	#4
larry may Senior Member Join Date: Jul 2005 Location: MISSOURI Posts: 3,256	Re: Bench Seat Console Pics http://67-72chevytrucks.com/vboard/s...d.php?t=192593 __________________ The biggest problem people have, is other people Thou shalt be cool and not hassle Be a site supporter. The heart of the wise inclines to the right, but the heart of the fool inclines to the left." Ecclesiastes 10:2

01-26-2007, 09:13 PM	#6
xmitsu10 Registered User Join Date: Aug 2006 Location: Alton, New Hampshire Posts: 274	Re: Bench Seat Console Pics Simple and cheap from another member. http://67-72chevytrucks.com/vboard/s...ghlight=holder I found this identical cupholder at Walmart cheap. Haven't made the brackets yet (it's a winter project). It may not be what you are looking for but it's gonna work perfect for me (hold the coffee or soda on the way to and from the car shows, then remove it and hide during the show). Mark __________________ 71 Cheyenne SWB

01-27-2007, 12:04 AM	#7
Billhilly Registered User Join Date: May 2001 Location: Wairarapa, New Zealand. Posts: 782	Re: Bench Seat Console Pics I have bought one of these for my truck, kinda unused at the moment, but when I get my truck going........oh and they work okey on LHD trucks as well! Here's the linky - http://www.jcwhitney.com/autoparts/I...D:100000278255 Two adjustable cup holders, and CD's, sunglass's etc out of sight. Somewhere to put the junk in my truck! Attached Images __________________ 1972 K2500 Long Box 400/350

01-27-2007, 02:21 AM	#8
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Bench Seat Console Pics I bought a cup holder from walmart that fastens to the front of the seat for my '89. I found it at walmart for @$5! Ill post a pic of it here for you tomorrow... I just noticed. Mine is identical to the one xmitsu10 posted above... Last edited by corn; 01-27-2007 at 02:24 AM.

01-27-2007, 09:12 AM	#9
stynchrr Registered User Join Date: Oct 2005 Location: Dover Delaware Posts: 270	Re: Bench Seat Console Pics Hey I done help on the console but i was wondering where you got your seat cover. Thanks Tim

01-27-2007, 10:32 AM	#10
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,211	Re: Bench Seat Console Pics RH drive 67-72! Thats pretty cool!

01-27-2007, 02:32 PM	#12
stynchrr Registered User Join Date: Oct 2005 Location: Dover Delaware Posts: 270	Re: Bench Seat Console Pics Thanks, They look like what i am looking for. I didn't see any prices on there site if you don't mind what do they run. Do you think the material they use is thicker than the stock reproductions? Tim

01-29-2007, 10:44 AM	#14
stynchrr Registered User Join Date: Oct 2005 Location: Dover Delaware Posts: 270	Re: Bench Seat Console Pics Thanks for the info. I really like the way your seat(and whole interior) looks and for the extra money I think that is the way I am going to go. Tim

01-29-2007, 10:56 AM	#15
cstanley Senior Member Join Date: Oct 2005 Location: Austin, TX Posts: 1,229	Re: Bench Seat Console Pics here's what i did, which works really well and would keep your bench very clean looking...but it doesn't sit on the seat... http://www.67-72chevytrucks.com/vboa...ghlight=wedgie __________________ "Anybody who would paint his truck like this, would go to a minister's funeral dressed in feathers!" - Big Enis Burdett '72 Blazer Restoration Blog: http://sportchicken.blogspot.com/

01-29-2007, 12:14 PM	#16
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: Bench Seat Console Pics What about one of these? http://www.classicheartbeat.com/cata...p%20Holder.htm __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

01-29-2007, 12:27 PM	#17
Blue'72 Skinned knuckles Join Date: Oct 2006 Location: Longview, Washington Posts: 1,126	Re: Bench Seat Console Pics Oooo, I like that cupholder idea! __________________ '72 C-10 longbox soon to be short step! '72 Chevelle (sold in January) '07 Sebring '01 Ranger (I've gotta long commute..) If you try to fail, and succeed, which have you done? My build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=276904

01-29-2007, 01:09 PM	#18
GMCBubba Registered User Join Date: Oct 2006 Location: Simpsonville, SC Posts: 255	Re: Bench Seat Console Pics unfortunately, the 40oz bladder busters aren't going to fit in the ash tray cupholder. but it's something __________________ 1969 GMC 3/4 ton, 307, 4-speed NP435GL, DANA 60, 4.10, HD rear leafs, manual everything, leaking oil and water. Now rocking 383, NV4500, power steering, power brakes. Finally undergoing restoration.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.