pickup beds - The 1947 - Present Chevrolet & GMC Truck Message Board Network

iride · 02-15-2007, 10:34 PM

Hi all I need to buy a different bed for my 64 3/4 ton 4x4 project the bed I have is very clean but very very smashed and requires to much work. The question is will all boxes 60-66 fit my 64. Also what years had the tool boxes built into the sides and are they worth having or a pain in the butt. If anyone can help thanks in advance also if you seen a good longbox im in Illinois.
Thanks
Todd

kris's66lwb · 02-17-2007, 11:38 AM

im not sure that they had tool boxes built in in the 60s but i know that the 60s fords had them and 67-67 had them all boxes from all 60-66 fleet will fit or 55-66 step will fit and i have a long fleet with one dent on the left rear by the tail lite that could be removed easybut im in california

MAR-Ktech · 02-17-2007, 12:32 PM

If you use a 60-62 bed it will have different bed to frame mounting points than the 64 and may not work with your 64 frame without modifications. Nothing that can't be changed, but it is not a drop-on, bolt-on swap.

Mar-Ktech

kris's66lwb · 02-18-2007, 11:59 AM

hey mar-ktech can you guys make custom lettered tail gates for a 66 fleetside

MAR-Ktech · 02-20-2007, 05:13 PM

We do not manufacture custom lettered tailgates.

Mar-Ktech

64shortc10 · 02-28-2007, 04:35 PM

Does anyone make reproduction sides for 60-66 shortbed fleetsides yet?
Anyone around Ca. Az. Or. or nevada have a short fleet under $500.00?

02-15-2007, 10:34 PM	#1
iride Registered User Join Date: Sep 2006 Location: illinois Posts: 54	pickup beds Hi all I need to buy a different bed for my 64 3/4 ton 4x4 project the bed I have is very clean but very very smashed and requires to much work. The question is will all boxes 60-66 fit my 64. Also what years had the tool boxes built into the sides and are they worth having or a pain in the butt. If anyone can help thanks in advance also if you seen a good longbox im in Illinois. Thanks Todd

02-17-2007, 11:38 AM	#2
kris's66lwb resident wrencher Join Date: Dec 2006 Location: ramona california Posts: 720	Re: pickup beds im not sure that they had tool boxes built in in the 60s but i know that the 60s fords had them and 67-67 had them all boxes from all 60-66 fleet will fit or 55-66 step will fit and i have a long fleet with one dent on the left rear by the tail lite that could be removed easybut im in california

02-17-2007, 12:32 PM	#3
MAR-Ktech Truck Parts Mfg. Join Date: Jul 2005 Location: Oklahoma City, OK Posts: 697	Re: pickup beds If you use a 60-62 bed it will have different bed to frame mounting points than the 64 and may not work with your 64 frame without modifications. Nothing that can't be changed, but it is not a drop-on, bolt-on swap. Mar-Ktech __________________ GET MAR-K Quality! Restoration and Custom Pickup Parts for Chevy, GMC, Ford, Dodge and Custom Trucks

02-18-2007, 11:59 AM	#4
kris's66lwb resident wrencher Join Date: Dec 2006 Location: ramona california Posts: 720	Re: pickup beds hey mar-ktech can you guys make custom lettered tail gates for a 66 fleetside

02-20-2007, 05:13 PM	#5
MAR-Ktech Truck Parts Mfg. Join Date: Jul 2005 Location: Oklahoma City, OK Posts: 697	Re: pickup beds We do not manufacture custom lettered tailgates. Mar-Ktech __________________ GET MAR-K Quality! Restoration and Custom Pickup Parts for Chevy, GMC, Ford, Dodge and Custom Trucks

02-28-2007, 04:35 PM	#6
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: pickup beds Does anyone make reproduction sides for 60-66 shortbed fleetsides yet? Anyone around Ca. Az. Or. or nevada have a short fleet under $500.00?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.