how hard is it to put a bb in my c10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jerry8168 · 02-19-2007, 01:45 AM

i found a 427 bb and i was woundering what i would have to do to put it in. and will it hook up to the manual stock transmission?

Slammed66 · 02-19-2007, 03:51 AM

It will bolt up to your tranny but you might run into issues with your clutch linkage , im not sure I ran a turbo 400

I used mounts from a 73-87 trucks and it dropped right in...

hammered65 · 02-19-2007, 10:01 AM

It fits in there pretty easily. The only issue I had was finding some headers that fit.

02-19-2007, 01:45 AM	#1
Jerry8168 Registered User Join Date: Nov 2006 Location: hughson Posts: 47	how hard is it to put a bb in my c10 i found a 427 bb and i was woundering what i would have to do to put it in. and will it hook up to the manual stock transmission?

02-19-2007, 03:51 AM	#2
Slammed66 Needs a Big Block Join Date: Oct 2003 Location: Red Deer , Alberta Posts: 1,198	Re: how hard is it to put a bb in my c10 It will bolt up to your tranny but you might run into issues with your clutch linkage , im not sure I ran a turbo 400 I used mounts from a 73-87 trucks and it dropped right in... __________________ 1964 Short box On dropmembers and billets 1962 Suburban family cruiser 1972 K10

02-19-2007, 10:01 AM	#3
hammered65 Registered User Join Date: Jan 2007 Location: Houston Posts: 53	Re: how hard is it to put a bb in my c10 It fits in there pretty easily. The only issue I had was finding some headers that fit.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.