fitting question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jlaird · 03-01-2007, 11:28 AM

Are both of these PTC? Is one better than the other in regards to the plastic vs the nickel plated brass?

*Shane* · 03-01-2007, 01:10 PM

both are PTC ... I prefer the plated brass to the plastic ... no reason other than personal preference.

jimmydean · 03-01-2007, 02:56 PM

I agree with Shane. I ran brass for everything just to be safe. I got all my brass off ebay on the cheap, so it was better all around.

The only plastic fitting I have is the gauge fitting coming out of the tee.

jlaird · 03-01-2007, 03:32 PM

Quote:

Originally Posted by jimmydean

I agree with Shane. I ran brass for everything just to be safe. I got all my brass off ebay on the cheap, so it was better all around.

The only plastic fitting I have is the gauge fitting coming out of the tee.

Who did you get it from on ebay? Cheaper than SD?

short step · 03-01-2007, 03:52 PM

try http://www.fittingsdepot.com/index.html
bob

bagged69c10 · 03-01-2007, 03:55 PM

This is where I get mine.
http://www.outlawmotorsports.biz/airfittings.asp

jlaird · 03-01-2007, 04:01 PM

Quote:

Originally Posted by short step

try http://www.fittingsdepot.com/index.html
bob

Wow, those are cheap. I wonder if they are brass? I noticed that they are only rated for 145psi. The ones on the top of this thread are 260psi. I don't need that much, but by those specs it sounds like the fittingsdepot ones are cheap for a reason???

jimmydean · 03-01-2007, 04:31 PM

I got my 90's here and my straight connects here. VT Kustoms did free shipping and KoolCads charged me like $5 for all 8 fittings.

jlaird · 03-01-2007, 05:18 PM

Quote:

Originally Posted by jimmydean

I got my 90's here and my straight connects here. VT Kustoms did free shipping and KoolCads charged me like $5 for all 8 fittings.

thanks Jimmy!

jimmydean · 03-01-2007, 05:43 PM

No prob.

Don't get me wrong, I got a ton of crap from SD, but I got all my brass nipples at Ace Hardware along with all my grade 5 and grade 8 stuff.

03-01-2007, 11:28 AM	#1
jlaird Senior Member Join Date: May 2004 Location: johnstown, NY Posts: 2,393	fitting question Are both of these PTC? Is one better than the other in regards to the plastic vs the nickel plated brass? Attached Images

03-01-2007, 01:10 PM	#2
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: fitting question both are PTC ... I prefer the plated brass to the plastic ... no reason other than personal preference.

03-01-2007, 02:56 PM	#3
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: fitting question I agree with Shane. I ran brass for everything just to be safe. I got all my brass off ebay on the cheap, so it was better all around. The only plastic fitting I have is the gauge fitting coming out of the tee. __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

03-01-2007, 03:52 PM	#5
short step Registered User Join Date: Dec 2002 Location: Ludlow,MA Posts: 145	Re: fitting question try http://www.fittingsdepot.com/index.html bob

03-01-2007, 03:55 PM	#6
bagged69c10 soon to be bagged64sub Join Date: Feb 2005 Location: DFW-currently phoenix Posts: 635	Re: fitting question This is where I get mine. http://www.outlawmotorsports.biz/airfittings.asp __________________ 1969 c-10, bagged, Zd, 20" Boyds SOLD! 1964 Suburban COMING SOON Build threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=304726 1965 c-10 long bed 1993 Sierra x-cab 1999 tahoe-4/5 on 22s 2005 Chevy work truck

03-01-2007, 04:31 PM	#8
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: fitting question I got my 90's here and my straight connects here. VT Kustoms did free shipping and KoolCads charged me like $5 for all 8 fittings. __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

03-01-2007, 05:43 PM	#10
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: fitting question No prob. Don't get me wrong, I got a ton of crap from SD, but I got all my brass nipples at Ace Hardware along with all my grade 5 and grade 8 stuff. __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.