Original Side Moldings? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kool K5 · 03-02-2007, 05:41 PM

Hey guys, I was wondering if these are original mouldings. I can't recall seeing anyone else with them, and they look almost identical to the ones on my 91 Jimmy.

Thanks,
Evan

Blazer1970 · 03-02-2007, 05:50 PM

No, not original. Those are late model stuff as you have noted.

bouncytruck · 03-02-2007, 07:06 PM

Looks like the stuff that comes on a roll from JCWhittney

**special-K** · 03-02-2007, 07:41 PM

O/T...Do you have 8-lug axles under there?

1969k10stepside · 03-02-2007, 08:09 PM

Reading his past posts in other threads it appears to have 3/4 ton axles under it Tim

Kool K5 · 03-03-2007, 12:15 AM

Thanks, thats what I was figuring. What do you guys think of these mouldings? Should I keep em, or replace them with the original style?

Evan

vtblazer · 03-03-2007, 06:22 AM

Quote:

Originally Posted by Kool K5

Thanks, thats what I was figuring. What do you guys think of these mouldings? Should I keep em, or replace them with the original style?

Evan

For the effort of removing then and installing the originals, those look fine.
Unless your going for the dead stock look.

The original clips are a better fit/install than the adhesive back kind IMO, if you do decide to go that route.

You could do either black or woodgrain style, either would be correct.

I choose black for mine.

bouncytruck · 03-03-2007, 12:12 PM

I think it looks fine. Personally, I'd replace that grill before worrying about the side trim.

LUV2XCLR8 · 03-03-2007, 01:11 PM

Be prepared to possibly loose some paint when you peel those off, I know

**jaros44sr** · 03-03-2007, 01:21 PM

Quote:

Originally Posted by bouncytruck

I think it looks fine. Personally, I'd replace that grill before worrying about the side trim.

I thought that was for added air flow, what do I know I have a Jimmy!!!

That is really a nice place to start a project, more pics...

BobbyK · 03-04-2007, 08:10 AM

I hate those factory trim clips and decided to take the easy route when I reinstalled mine.
I use 3M's trim adhesive tape.This stuff is the Best in the Business.

It's been 4 years now and the trim is still tight to the body.

**jaros44sr** · 03-04-2007, 09:02 AM

Nice idea!! looks like I'll be welding up my holes. J

Chevyman63 · 03-04-2007, 09:52 AM

Quote:

Originally Posted by BobbyK

I hate those factory trim clips and decided to take the easy route when I reinstalled mine.
I use 3M's trim adhesive tape.This stuff is the Best in the Business.

It's been 4 years now and the trim is still tight to the body.

Good idea! Rust loves thoses little holes to start in, I know, I've become a rustologist over the years.

Kool K5 · 03-04-2007, 10:54 AM

Heres some more pics guys:

Evan

It appers that the T-Case shifter is off an 80's 4x4?

Nasty Rockers

Bent Grill

Future Home to a 350

Towing it Home

Looks good from a Distance

**jaros44sr** · 03-04-2007, 11:22 AM

Quote:

Originally Posted by Chevyman63

Good idea! Rust loves thoses little holes to start in, I know, I've become a rustologist over the years.

If you are a rustologist, I must have my doctorate by now.

**jaros44sr** · 03-04-2007, 11:27 AM

[QUOTE=Kool K5;2058489]Heres some more pics guys:

Evan

Bent Grill

I think its winking at me...

Nice start, keep us posted with progress. Once you pull the carpets you'll see how bad the rust really is.... J

**special-K** · 03-04-2007, 11:43 AM

I`d leave the moulding until you mess with the body.
Looks like to have a drivetrain swapped from a newer 3/4t.
How the heck did the grille gey mashed with that brush guard there?Someone must have dropped the motor on it or something.
I remember when you first showed it here...now that I see your other pictures.
Have fun with it.

Chevyman63 · 03-04-2007, 01:41 PM

Quote:

Originally Posted by jaros44

If you are a rustologist, I must have my doctorate by now.

Dr. J ... I proesume.

**jaros44sr** · 03-04-2007, 02:16 PM

Quote:

Originally Posted by Chevyman63

Dr. J ... I proesume.

Haha

Kool K5 · 03-04-2007, 08:32 PM

"How the heck did the grille gey mashed with that brush guard there?Someone must have dropped the motor on it or something."

I mentioned in my previous thread. http://67-72chevytrucks.com/vboard/s...d.php?t=211729
But to recap, Dr. Hook (tow truck) did it.

davesamnesia · 03-07-2007, 08:30 PM

Man can I hook you up on a grill. Have a drivers qual. with headlight bezels. 20.00 donation to the board and shipping. PM me if interested.
Dave

Chris27 · 03-08-2007, 02:53 PM

I have the same side mouldings on my K5. Way cheaper than buying original stuff, and most people don't even notice.

Chris27 · 03-08-2007, 02:57 PM

Here's a link to my pics.

http://67-72chevytrucks.com/vboard/s...d.php?t=216982

Kool K5 · 03-08-2007, 08:15 PM

I like the looks of them, but when i finish working on the body

I'll probably try to find some stock ones. Depending on how much money I have left over that is.

And does anyone know what year truck this t-case shifter is from?

P.S. Chris27 I really like the color of your K5

Evan

03-02-2007, 05:41 PM	#1
Kool K5 Registered User Join Date: Sep 2006 Location: Niverville, Mb Posts: 88	Original Side Mouldings? Hey guys, I was wondering if these are original mouldings. I can't recall seeing anyone else with them, and they look almost identical to the ones on my 91 Jimmy. Thanks, Evan __________________ 70 Blazer 4x4 305/sm465/np205 80 Buick LeSabre Limited 72 Honda CB350F 77 Honda Cb750K 00 Ducati Monster M900ie Last edited by Kool K5; 03-02-2007 at 05:48 PM.

03-02-2007, 05:50 PM	#2
Blazer1970 Registered User Join Date: Dec 1999 Location: Old Mission, MI, USA Posts: 2,507	Re: Original Side Moldings? No, not original. Those are late model stuff as you have noted. __________________ Tim

03-02-2007, 07:06 PM	#3
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: Original Side Moldings? Looks like the stuff that comes on a roll from JCWhittney __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

03-02-2007, 07:41 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Original Side Moldings? O/T...Do you have 8-lug axles under there? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-02-2007, 08:09 PM	#5
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: Original Side Moldings? Reading his past posts in other threads it appears to have 3/4 ton axles under it Tim

03-03-2007, 12:15 AM	#6
Kool K5 Registered User Join Date: Sep 2006 Location: Niverville, Mb Posts: 88	Re: Original Side Moldings? Thanks, thats what I was figuring. What do you guys think of these mouldings? Should I keep em, or replace them with the original style? Evan __________________ 70 Blazer 4x4 305/sm465/np205 80 Buick LeSabre Limited 72 Honda CB350F 77 Honda Cb750K 00 Ducati Monster M900ie

03-03-2007, 12:12 PM	#8
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: Original Side Moldings? I think it looks fine. Personally, I'd replace that grill before worrying about the side trim. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

03-03-2007, 01:11 PM	#9
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Original Side Moldings? Be prepared to possibly loose some paint when you peel those off, I know __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

03-04-2007, 08:10 AM	#11
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	Re: Original Side Moldings? I hate those factory trim clips and decided to take the easy route when I reinstalled mine. I use 3M's trim adhesive tape.This stuff is the Best in the Business. It's been 4 years now and the trim is still tight to the body. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

03-04-2007, 09:02 AM	#12
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: Original Side Moldings? Nice idea!! looks like I'll be welding up my holes. J __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-04-2007, 10:54 AM	#14
Kool K5 Registered User Join Date: Sep 2006 Location: Niverville, Mb Posts: 88	Re: Original Side Moldings? Heres some more pics guys: Evan It appers that the T-Case shifter is off an 80's 4x4? Nasty Rockers Bent Grill Future Home to a 350 Towing it Home Looks good from a Distance __________________ 70 Blazer 4x4 305/sm465/np205 80 Buick LeSabre Limited 72 Honda CB350F 77 Honda Cb750K 00 Ducati Monster M900ie

03-04-2007, 11:27 AM	#16
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,764	Re: Original Side Moldings? [QUOTE=Kool K5;2058489]Heres some more pics guys: Evan Bent Grill I think its winking at me... Nice start, keep us posted with progress. Once you pull the carpets you'll see how bad the rust really is.... J __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

03-04-2007, 11:43 AM	#17
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Original Side Moldings? I`d leave the moulding until you mess with the body. Looks like to have a drivetrain swapped from a newer 3/4t. How the heck did the grille gey mashed with that brush guard there?Someone must have dropped the motor on it or something. I remember when you first showed it here...now that I see your other pictures. Have fun with it. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-04-2007, 08:32 PM	#20
Kool K5 Registered User Join Date: Sep 2006 Location: Niverville, Mb Posts: 88	Re: Original Side Moldings? "How the heck did the grille gey mashed with that brush guard there?Someone must have dropped the motor on it or something." I mentioned in my previous thread. http://67-72chevytrucks.com/vboard/s...d.php?t=211729 But to recap, Dr. Hook (tow truck) did it. __________________ 70 Blazer 4x4 305/sm465/np205 80 Buick LeSabre Limited 72 Honda CB350F 77 Honda Cb750K 00 Ducati Monster M900ie

03-07-2007, 08:30 PM	#21
davesamnesia Active Member Join Date: Nov 2005 Location: Marshall, Mi. Posts: 197	Re: Original Side Moldings? Man can I hook you up on a grill. Have a drivers qual. with headlight bezels. 20.00 donation to the board and shipping. PM me if interested. Dave __________________ 70 K5 350/350 Air Dave



Register or Log In To remove these advertisements.

03-08-2007, 02:53 PM	#22
Chris27 Blazerless Join Date: Nov 2006 Location: Kelowna, BC, Canada Posts: 274	Re: Original Side Moldings? I have the same side mouldings on my K5. Way cheaper than buying original stuff, and most people don't even notice. __________________ 72' K5 Blazer 4x4 350TBI/700R4/NP205 3/4 ton diffs. Daily driver. SOLD 69' Beaumont 388/700R4 11.70@116 77' Bronco, Wife's mall cruiser/poser 4x4. Capable but too pretty to go offroad.

03-08-2007, 02:57 PM	#23
Chris27 Blazerless Join Date: Nov 2006 Location: Kelowna, BC, Canada Posts: 274	Re: Original Side Moldings? Here's a link to my pics. http://67-72chevytrucks.com/vboard/s...d.php?t=216982 __________________ 72' K5 Blazer 4x4 350TBI/700R4/NP205 3/4 ton diffs. Daily driver. SOLD 69' Beaumont 388/700R4 11.70@116 77' Bronco, Wife's mall cruiser/poser 4x4. Capable but too pretty to go offroad.

03-08-2007, 08:15 PM	#24
Kool K5 Registered User Join Date: Sep 2006 Location: Niverville, Mb Posts: 88	Re: Original Side Moldings? I like the looks of them, but when i finish working on the body I'll probably try to find some stock ones. Depending on how much money I have left over that is. And does anyone know what year truck this t-case shifter is from? P.S. Chris27 I really like the color of your K5 Evan __________________ 70 Blazer 4x4 305/sm465/np205 80 Buick LeSabre Limited 72 Honda CB350F 77 Honda Cb750K 00 Ducati Monster M900ie

Register or Log In To remove these advertisements.