This un-cut dash is hot!!!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1969k10stepside · 03-12-2007, 10:55 PM

Well,it was.I was cutting up an ol parts truck cause of the high scrap metal prices and couldnt sell it whole.So,while cutting it up,it ignited,burn the wiring,and the heater box.Second pic is after I hosed it down...Just had to share.Anyone need one hot uncut dash?

Name: Pic1035.jpg
Views: 803
Size: 61.2 KB

Name: Pic1036.jpg
Views: 793
Size: 76.5 KB

Captain Knievel · 03-12-2007, 10:59 PM

At my house I would call that a heater mod.

1LoC10 · 03-12-2007, 10:59 PM

wow I can see it now.... oh crap its on fire! get the camara....... ok now get the hose...lol

pissonNOS · 03-12-2007, 10:59 PM

I love how the wildman sticker is almost un touched haha

**Hart_Rod** · 03-12-2007, 11:20 PM

At my house, we would say dinner is ready

.

1969k10stepside · 03-12-2007, 11:38 PM

I think there was a squirrel somewhere around before I seen the fire

I dont know where it is now..or was that not chicken I had for supper

Hugger · 03-12-2007, 11:44 PM

Quote:

Originally Posted by 1LoC10

wow I can see it now.... oh crap its on fire! get the camara....... ok now get the hose...lol

I was thinking the same thing...FIRE...CAMERA...HOSE!!
Life is good!!!

1969k10stepside · 03-12-2007, 11:45 PM

Hey,I had the camera near by cause I was taking pictures of all the stickers in the windshield before I smashed it out

stllookn · 03-13-2007, 12:55 AM

Hey...I could have used the ingnition bezel...and the turn signals...and...LOL!

brak · 03-13-2007, 01:06 AM

I'll take the "Hot" side vent assembly or assemblies if both are intact...

GREASEMONKEY72 · 03-13-2007, 01:08 AM

thatll buff out just fine...seriously....everything else is useless though..haha

**special-K** · 03-13-2007, 09:09 AM

Note to self#1:Remove all flammibles under next dash before lighting torch .
Note to self#2:Use sawzall or air chisel on next dash and screw the flammibles.

67ChevyRedneck · 03-13-2007, 09:18 AM

I'm suspecting arson was the cause of fire....

sleepyboy · 03-13-2007, 09:24 AM

One way to remove paint

Zumo · 03-13-2007, 10:07 AM

You melted all your G.I. Joes when you were young didn't you?

WyoRoadDog · 03-13-2007, 10:52 AM

Is this what is meant by "heat treated?" Is that desirable in a dash?

***Liz*** · 03-13-2007, 10:53 AM

Quote:

Originally Posted by 1969k10stepside

Hey,I had the camera near by cause I was taking pictures of all the stickers in the windshield before I smashed it out

yeaaahhhh we know you to well to believe that one Dustin...

sixtysevengmc · 03-13-2007, 11:01 AM

Quote:

Originally Posted by Zumo

You melted all your G.I. Joes when you were young didn't you?

you aint gonna tell my mom are you?

1lowdiesel · 03-13-2007, 11:31 AM

hell yea scrap is way up i've got three trucks i've gotta cut up this weekend.

corn · 03-13-2007, 08:11 PM

Thats Wild Man!

Get it?

I crack myself up...

1969k10stepside · 03-13-2007, 08:12 PM

msgross · 03-13-2007, 08:17 PM

now I know our trucks are old, but I don't think that the underdash heaters were that primitive! or that could have been an underdash light modification...

onetonk5 · 03-13-2007, 08:23 PM

if your junking the truck why bother cutting it up?

1969k10stepside · 03-13-2007, 08:24 PM

Dont have a trailer and Im not borrowing one again...had to dice it some so it and the rest of the body will fit in the bed of the truck to haul off

msgross · 03-13-2007, 08:47 PM

oh man... and I needed that part right there!!!!!

just kidding

03-12-2007, 10:59 PM	#3
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: This un-cut dash is hot!!!! wow I can see it now.... oh crap its on fire! get the camara....... ok now get the hose...lol __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

03-12-2007, 10:59 PM	#4
pissonNOS senior member Join Date: Feb 2003 Location: fort macleod alberta Posts: 2,770	Re: This un-cut dash is hot!!!! I love how the wildman sticker is almost un touched haha __________________ 69 GMC bagged

03-12-2007, 11:20 PM	#5
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,862	Re: This un-cut dash is hot!!!! At my house, we would say dinner is ready . __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-12-2007, 11:38 PM	#6
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: This un-cut dash is hot!!!! I think there was a squirrel somewhere around before I seen the fire I dont know where it is now..or was that not chicken I had for supper Last edited by 1969k10stepside; 03-12-2007 at 11:39 PM.

03-12-2007, 11:45 PM	#8
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: This un-cut dash is hot!!!! Hey,I had the camera near by cause I was taking pictures of all the stickers in the windshield before I smashed it out Last edited by 1969k10stepside; 03-12-2007 at 11:46 PM.

03-12-2007, 10:55 PM	#1
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	This un-cut dash is hot!!!! Well,it was.I was cutting up an ol parts truck cause of the high scrap metal prices and couldnt sell it whole.So,while cutting it up,it ignited,burn the wiring,and the heater box.Second pic is after I hosed it down...Just had to share.Anyone need one hot uncut dash? Last edited by 1969k10stepside; 03-12-2007 at 10:58 PM.

03-12-2007, 10:59 PM	#2
Captain Knievel Senior Member Join Date: Feb 2007 Location: Seattle, WA Posts: 458	Re: This un-cut dash is hot!!!! At my house I would call that a heater mod. __________________ 1970 C10

03-13-2007, 12:55 AM	#9
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: This un-cut dash is hot!!!! Hey...I could have used the ingnition bezel...and the turn signals...and...LOL! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

03-13-2007, 01:06 AM	#10
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: This un-cut dash is hot!!!! I'll take the "Hot" side vent assembly or assemblies if both are intact... __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill

03-13-2007, 01:08 AM	#11
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: This un-cut dash is hot!!!! thatll buff out just fine...seriously....everything else is useless though..haha __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

03-13-2007, 09:09 AM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: This un-cut dash is hot!!!! Note to self#1:Remove all flammibles under next dash before lighting torch . Note to self#2:Use sawzall or air chisel on next dash and screw the flammibles. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-13-2007, 09:18 AM	#13
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: This un-cut dash is hot!!!! I'm suspecting arson was the cause of fire.... __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

03-13-2007, 09:24 AM	#14
sleepyboy '69 Step Join Date: Mar 2005 Location: Marion, Texas Posts: 722	Re: This un-cut dash is hot!!!! One way to remove paint

03-13-2007, 10:07 AM	#15
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Re: This un-cut dash is hot!!!! You melted all your G.I. Joes when you were young didn't you? __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

03-13-2007, 10:52 AM	#16
WyoRoadDog Page intentionally left blank. Join Date: Jul 2006 Location: Laramie, WY Posts: 299	Re: This un-cut dash is hot!!!! Is this what is meant by "heat treated?" Is that desirable in a dash? __________________ There is a theory which states that if ever anyone discovers exactly what the Universe is for and why it is here, it will instantly disappear and be replaced by something even more bizarre and inexplicable.There is another theory which states that this has already happened. - Douglas Adams '67 GMC 4x4, 305 V6! Or all the parts for anyway... '17 Subaru Outback. '18 Toyota Tacoma TRD Off Road. '99 Ducati 900SS.



Register or Log In To remove these advertisements.

03-13-2007, 11:31 AM	#19
1lowdiesel Senior Member Join Date: Oct 2006 Location: central jersey Posts: 763	Re: This un-cut dash is hot!!!! hell yea scrap is way up i've got three trucks i've gotta cut up this weekend. __________________ 69 4wd V6 20k orig miles!! 05 ccsb 2wd Diesel 500hp bagged and soon to be stock floored. 01 rcsb chevy 2wd 6bt cummins :devil:> build xtremediesel.com

03-13-2007, 08:11 PM	#20
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: This un-cut dash is hot!!!! Thats Wild Man! Get it? I crack myself up...

03-13-2007, 08:12 PM	#21
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: This un-cut dash is hot!!!!

03-13-2007, 08:17 PM	#22
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: This un-cut dash is hot!!!! now I know our trucks are old, but I don't think that the underdash heaters were that primitive! or that could have been an underdash light modification... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

03-13-2007, 08:23 PM	#23
onetonk5 Cereal Killer Join Date: Jan 2006 Location: Montgomery, Alabama Posts: 639	Re: This un-cut dash is hot!!!! if your junking the truck why bother cutting it up? __________________ If I dont do it....somebody else will. Last edited by onetonk5; 03-13-2007 at 08:23 PM.

03-13-2007, 08:24 PM	#24
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: This un-cut dash is hot!!!! Dont have a trailer and Im not borrowing one again...had to dice it some so it and the rest of the body will fit in the bed of the truck to haul off Last edited by 1969k10stepside; 03-13-2007 at 08:25 PM.

03-13-2007, 08:47 PM	#25
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: This un-cut dash is hot!!!! oh man... and I needed that part right there!!!!! just kidding Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

Register or Log In To remove these advertisements.