|
09-02-2002, 01:58 PM
|
#1 |
|
Registered User
Join Date: Jul 2002
Location: denver
Posts: 33
|
1 ton dually wheels
I was up at my fathers and we were looking at his wheels on his 75 1 ton dually. I noticed that there is 2 small studs on each wheel. Can some one tell me what these are for? I have added a pic so that you can get a better idea what I'm talking about.
__________________
67 Grand prix convertable 68 Chevy 3/4 ton truck 66 Cadillac sedan deville |
|
|
|
09-03-2002, 07:21 AM
|
#2 |
|
BAD BOW-Silverado XST
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
|
I think it's an aligment stud for the addition of another wheel. Especially if the one in the pic is used on the inside.
Interesting to find out though. |
|
|
|
|
09-03-2002, 08:01 PM
|
#3 |
|
Registered User
Join Date: Jul 2002
Location: denver
Posts: 33
|
That was my first thought, but none of the wheels have holes in that location for them to slide into so that pretty much counts out that idea. I thought it might be some kind of stud to hold a hub cap of some sort.
__________________
67 Grand prix convertable 68 Chevy 3/4 ton truck 66 Cadillac sedan deville |
|
|
|
|
09-04-2002, 10:34 PM
|
#4 |
|
Registered User
Join Date: May 2002
Location: Reidsville, NC USA
Posts: 19
|
I have a 85 ton duelly with it on it... It is for holding a chrome cover on the wheel. you slip a round bracket on it and then the lug bolts go over that. Then you pop the cover on and it has a place for two screws that screw into the bracket. If I had a camera I could show you but if you need anymore info.. let me know......
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
