Stock Steering question... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

texascowboy593 · 03-25-2007, 12:18 PM

For those of you who have removed your stock steering column/gearbox, How did you do it? Whats the procedure. I have removed the steering wheel and pulled apart the gearbox. The worm gear and the square watchamacallit that travels up and down the worm gear are still in the box. The hub on top of the column is still on as well. I tried a puller to get the hub off, but it dosen't fit well and it's breaking the metal on the hub. It won't budge. My new column should be here Wednesday and I'd like to get this POS OUT!!!

Any help would be greatly appreciated

Thx!

03-25-2007, 12:18 PM	#1
texascowboy593 Registered User Join Date: Dec 2004 Location: Southeast Tx Posts: 1,302	Stock Steering question... For those of you who have removed your stock steering column/gearbox, How did you do it? Whats the procedure. I have removed the steering wheel and pulled apart the gearbox. The worm gear and the square watchamacallit that travels up and down the worm gear are still in the box. The hub on top of the column is still on as well. I tried a puller to get the hub off, but it dosen't fit well and it's breaking the metal on the hub. It won't budge. My new column should be here Wednesday and I'd like to get this POS OUT!!! Any help would be greatly appreciated Thx! __________________ "The rays of light thru the Shiner Bock bottle make me wanna turn the key and put down the throttle...and get lost down 35" - Jason Boland www.YouTube.com/user/593Films - Watch My Videos! 1977 Silverado K10 2014 Dodge Durango (Wife-mobile) 2008 Dodge Ram Lone Star Edition (Daily driver)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.