Not sure what to think???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jostrans68 · 09-05-2002, 02:02 AM

http://cgi.ebay.com/ebaymotors/ws/eB...tem=1856378869
gOTTA CHECK mY OLD 327 MANIFOLDS DAMN GOLD MINE IN THE GARAGE

Blazer1970 · 09-05-2002, 07:37 AM

3919803 - used on '67 and '68 327s and 350s, cast iron, A, B, F, X, and Y body applications. If anyone has $500, I bet I can find them one pretty easily.

JimKshortstep4x4 · 09-05-2002, 08:23 AM

I sure hope that someone does not need a manifold that badly.
I do not believe that they are that rare, (I have a couple of them) and I see them at swap meets for $20-$40.

Jim

slam33 · 09-05-2002, 10:12 AM

Someone who dosn't know any better will buy it. Maybe that guy who spent $60 on the parts interchange book

tom hand · 09-05-2002, 10:30 AM

While not worth 500 dollars, those manifolds are somwhat rare because they were only made for like two years. It has the oil fill spout and the exhaust crossover actally runs under the carb which requires that you use a special gasket and the old stvle quadrajet to work properly. Somebody doing "number matching" restoration will give a few bucks cause those are getting harder to find. Hey if you got'um, clean 'um up and put 'um on e-bay

jostrans68 · 09-06-2002, 09:04 PM

Well I checked my stash and low and behold I have the same casting number BUT I have the ultra rare Chrome oil tube. Might fetch 600.00 instead of 500.00 LOL In all honest what is it worth I have been thinking of selling but havent a idea thanks Jack

Stano · 09-06-2002, 11:12 PM

I got one of them in the garage! Wonder if the extra oil caked on it makes it worth more? No joke about having the right gasket and stuff. Guys at the part store looked at me like I was retarded when they gave me the wrong gasket and said it won't work. They argued that all GM 4bbl used the same gasket. I then returned home and retrieved the old thin paper type gasket and took it to them they were like DUH! UH? What is it again? Best of all I didn't know what it fit originally. I had it in a 75 Monte Carlo with a 350!

jostrans68 · 09-07-2002, 01:31 AM

Darn I knew I blew it I cleaned the grease option off....probably lost 50.00 damn....LOL

09-05-2002, 02:02 AM	#1
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	Not sure what to think???? http://cgi.ebay.com/ebaymotors/ws/eB...tem=1856378869 gOTTA CHECK mY OLD 327 MANIFOLDS DAMN GOLD MINE IN THE GARAGE __________________ [CGTW Member former 67-72 now with a 96 silverado

09-05-2002, 07:37 AM	#2
Blazer1970 Registered User Join Date: Dec 1999 Location: Old Mission, MI, USA Posts: 2,507	3919803 - used on '67 and '68 327s and 350s, cast iron, A, B, F, X, and Y body applications. If anyone has $500, I bet I can find them one pretty easily. __________________ Tim

09-05-2002, 10:12 AM	#4
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	Someone who dosn't know any better will buy it. Maybe that guy who spent $60 on the parts interchange book __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

09-05-2002, 10:30 AM	#5
tom hand CCRider Join Date: Feb 2000 Location: Olive Branch,MS,USA Posts: 2,232	While not worth 500 dollars, those manifolds are somwhat rare because they were only made for like two years. It has the oil fill spout and the exhaust crossover actally runs under the carb which requires that you use a special gasket and the old stvle quadrajet to work properly. Somebody doing "number matching" restoration will give a few bucks cause those are getting harder to find. Hey if you got'um, clean 'um up and put 'um on e-bay __________________ 72 GMC Sierra SWB almost finished---- 84 Softail Olive Branch MS

09-06-2002, 09:04 PM	#6
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	Well I checked my stash and low and behold I have the same casting number BUT I have the ultra rare Chrome oil tube. Might fetch 600.00 instead of 500.00 LOL In all honest what is it worth I have been thinking of selling but havent a idea thanks Jack __________________ [CGTW Member former 67-72 now with a 96 silverado

09-05-2002, 08:23 AM	#3
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	I sure hope that someone does not need a manifold that badly. I do not believe that they are that rare, (I have a couple of them) and I see them at swap meets for $20-$40. Jim

09-06-2002, 11:12 PM	#7
Stano Registered User Join Date: Jul 2000 Location: Mo Posts: 963	I got one of them in the garage! Wonder if the extra oil caked on it makes it worth more? No joke about having the right gasket and stuff. Guys at the part store looked at me like I was retarded when they gave me the wrong gasket and said it won't work. They argued that all GM 4bbl used the same gasket. I then returned home and retrieved the old thin paper type gasket and took it to them they were like DUH! UH? What is it again? Best of all I didn't know what it fit originally. I had it in a 75 Monte Carlo with a 350! __________________ New daily driver 96 Chevy K3500 crew cab dually 53,000 miles 350 Vortec 4L80 Nice ride 67 Chevy C-10 LWB Built 350 TH-400 Wifes ride and family rig: 2001 Furd Expedition 5.4 Liter Kickin back in Rolla,Mo. USA "Do the thing you fear most and the death of fear is certain" Mark Twain

09-07-2002, 01:31 AM	#8
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	Darn I knew I blew it I cleaned the grease option off....probably lost 50.00 damn....LOL __________________ [CGTW Member former 67-72 now with a 96 silverado



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.