NEw carb for my 250 ??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scrapmetalart · 04-11-2007, 10:46 PM

Where is the best place to buy a new carb for my 67 250 6 cyl?
Is there a vendor here that sells them???

ThatOneBlue67 · 04-11-2007, 10:54 PM

You can actually get the mfrom any autoparts store (need to be ordered I imagine) BUT they do cost a pretty penny.

Big D · 04-11-2007, 10:58 PM

You can probably get them at Autozone/O'Reillys for about 100 bucks. I've heard you might have to try 2 or 3 before you get a good one however.

If its a 1 barrel Rochester, Theres really not much to rebuilding them if you have a decent core.

ThatOneBlue67 · 04-11-2007, 11:03 PM

Try and shoot for the Monojet. I've heard bad things about the "Model B" Rochester.

shifty · 04-11-2007, 11:10 PM

Our local Advance Auto Parts carries them. Rebuild kits cost about half of what you'll pay to get one rebuilt. Regardless whether you rebuild or just replace, you need to tweak and tune the carb after replacement (or have someone else who knows what they are doing do it)

ThatOneBlue67 · 04-11-2007, 11:19 PM

Or...

you could always go with an aftermarket intake and put MULTIPLE Rochester carbs on there with a cool little, polished throttle linkage setup.

But I'll let you sleep on it

scrapmetalart · 04-11-2007, 11:24 PM

Ok. now what carb do I have? tag on the front 7027011 E7 IG...

Also where can I look up the engine # on the pad beside the distributer? F0615TF

ThatOneBlue67 · 04-12-2007, 12:03 AM

Huh... my Model B was bulkier than that and I don't think that is a Monojet. Maybe a Carter?

Either way, if you're just looking for a decent replacement, just tell the autoparts guys you need a carb for a 1967 Chevy 250. Whether its the EXACT same or not, it should still bolt right up to the intake, fuel line, manual choke, and throttle link. Just make sure you keep whatever parts from this one that you may need. (I know my throttle linkage was a little screwy.)

scrapmetalart · 04-12-2007, 12:09 AM

Quote:

Originally Posted by ThatOneBlue67

Huh... my Model B was bulkier than that and I don't think that is a Monojet. Maybe a Carter?

Either way, if you're just looking for a decent replacement, just tell the autoparts guys you need a carb for a 1967 Chevy 250. Whether its the EXACT same or not, it should still bolt right up to the intake, fuel line, manual choke, and throttle link. Just make sure you keep whatever parts from this one that you may need. (I know my throttle linkage was a little screwy.)

Thanks. I am just looking for a good new carb. I could rebuild this one but it is my daily & would rather spend the money on a new one.

Now...about those engine #'s??????

shifty · 04-12-2007, 12:28 AM

When you talk about engine #'s, which numbers are you referring to, and why are you looking to get them? Just curious. Not sure if I can help or not.

scrapmetalart · 04-12-2007, 12:30 AM

Quote:

Originally Posted by shifty

When you talk about engine #'s, which numbers are you referring to, and why are you looking to get them? Just curious. Not sure if I can help or not.

Also where can I look up the engine # on the pad beside the distributer? F0615TF

I just want to know more about my truck...

big casting # on the side of the block are
8921968
GM
41

shifty · 04-12-2007, 12:41 AM

You'll need to visit www.inliners.org or www.stovebolt.com to learn more, no doubt. Some of the inline-savvy guys here might know some stuff, but those two websites are the end-all be all resource for them.

On the passenger side, you will find some numbers and symbols under the two side covers that cover the pushrods, I believe one of them denotes what year the block was made. That's about the limit of my knowledge on the topic.

scrapmetalart · 04-12-2007, 12:43 AM

Thanks Shifty. I will check out those links...

04-11-2007, 10:46 PM	#1
scrapmetalart Junior Member Join Date: Mar 2007 Location: DAYTON Posts: 505	NEw carb for my 250 ??? Where is the best place to buy a new carb for my 67 250 6 cyl? Is there a vendor here that sells them??? __________________ frontstreetcycle on Instagram

04-11-2007, 10:54 PM	#2
ThatOneBlue67 I survived Dead Man's Curve. Join Date: Apr 2006 Location: The Nine-Five-687 Posts: 389	Re: NEw carb for my 250 ??? You can actually get the mfrom any autoparts store (need to be ordered I imagine) BUT they do cost a pretty penny. __________________ "The people should not be afraid of their government. The government should be afraid of it's people." "The Hurricane" 1967 Chevrolet C10 350 Eight Cylinder, 700R4 BowtieOverdrive *Cherry Bomb...* Disturbing the Peace Since 1968.

04-11-2007, 10:58 PM	#3
Big D Registered User Join Date: Apr 2005 Location: Dunlap, IL Posts: 308	Re: NEw carb for my 250 ??? You can probably get them at Autozone/O'Reillys for about 100 bucks. I've heard you might have to try 2 or 3 before you get a good one however. If its a 1 barrel Rochester, Theres really not much to rebuilding them if you have a decent core. __________________ 68 GMC 64 1/2 Mustang convert A bachelor's life is no life for a single man." - Samuel Goldwyn

04-11-2007, 11:03 PM	#4
ThatOneBlue67 I survived Dead Man's Curve. Join Date: Apr 2006 Location: The Nine-Five-687 Posts: 389	Re: NEw carb for my 250 ??? Try and shoot for the Monojet. I've heard bad things about the "Model B" Rochester. __________________ "The people should not be afraid of their government. The government should be afraid of it's people." "The Hurricane" 1967 Chevrolet C10 350 Eight Cylinder, 700R4 BowtieOverdrive *Cherry Bomb...* Disturbing the Peace Since 1968.

04-11-2007, 11:10 PM	#5
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: NEw carb for my 250 ??? Our local Advance Auto Parts carries them. Rebuild kits cost about half of what you'll pay to get one rebuilt. Regardless whether you rebuild or just replace, you need to tweak and tune the carb after replacement (or have someone else who knows what they are doing do it) __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

04-11-2007, 11:19 PM	#6
ThatOneBlue67 I survived Dead Man's Curve. Join Date: Apr 2006 Location: The Nine-Five-687 Posts: 389	Re: NEw carb for my 250 ??? Or... you could always go with an aftermarket intake and put MULTIPLE Rochester carbs on there with a cool little, polished throttle linkage setup. But I'll let you sleep on it __________________ "The people should not be afraid of their government. The government should be afraid of it's people." "The Hurricane" 1967 Chevrolet C10 350 Eight Cylinder, 700R4 BowtieOverdrive *Cherry Bomb...* Disturbing the Peace Since 1968.

04-11-2007, 11:24 PM	#7
scrapmetalart Junior Member Join Date: Mar 2007 Location: DAYTON Posts: 505	Re: NEw carb for my 250 ??? Ok. now what carb do I have? tag on the front 7027011 E7 IG... Also where can I look up the engine # on the pad beside the distributer? F0615TF Attached Images __________________ frontstreetcycle on Instagram

04-12-2007, 12:03 AM	#8
ThatOneBlue67 I survived Dead Man's Curve. Join Date: Apr 2006 Location: The Nine-Five-687 Posts: 389	Re: NEw carb for my 250 ??? Huh... my Model B was bulkier than that and I don't think that is a Monojet. Maybe a Carter? Either way, if you're just looking for a decent replacement, just tell the autoparts guys you need a carb for a 1967 Chevy 250. Whether its the EXACT same or not, it should still bolt right up to the intake, fuel line, manual choke, and throttle link. Just make sure you keep whatever parts from this one that you may need. (I know my throttle linkage was a little screwy.) __________________ "The people should not be afraid of their government. The government should be afraid of it's people." "The Hurricane" 1967 Chevrolet C10 350 Eight Cylinder, 700R4 BowtieOverdrive *Cherry Bomb...* Disturbing the Peace Since 1968.

04-12-2007, 12:28 AM	#10
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: NEw carb for my 250 ??? When you talk about engine #'s, which numbers are you referring to, and why are you looking to get them? Just curious. Not sure if I can help or not. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

04-12-2007, 12:41 AM	#12
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: NEw carb for my 250 ??? You'll need to visit www.inliners.org or www.stovebolt.com to learn more, no doubt. Some of the inline-savvy guys here might know some stuff, but those two websites are the end-all be all resource for them. On the passenger side, you will find some numbers and symbols under the two side covers that cover the pushrods, I believe one of them denotes what year the block was made. That's about the limit of my knowledge on the topic. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

04-12-2007, 12:43 AM	#13
scrapmetalart Junior Member Join Date: Mar 2007 Location: DAYTON Posts: 505	Re: NEw carb for my 250 ??? Thanks Shifty. I will check out those links... __________________ frontstreetcycle on Instagram



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.