The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-22-2007, 10:59 PM   #1
N2TRUX
Happy to be here
 
N2TRUX's Avatar
 
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
What did you get done? 04/22

I spent the weekend in Dallas watching my daughters team play volleyball. They finished the day with a win so they will be in the Gold division tomorrow. If the place in the top 3 they will qualify to play at the USAV Junior Olympics this Summer.

I did get a little bit truck related done. I dropped by Stoked Out Specialties to visit with Keith (N2billet) and Roger. I looked at all their latest projects, took a few pictures and talked a bit about my Blazer.

Unfortunately I had to leave to get back in time for our first round of play. I'll post pictures later.

What did you get done?
__________________
Follow me on Facebook and Instagram @N2trux.com

Articles-

"Jake" the 84 to 74 crewcab

"Elwood" the77_Remix

85 GMC Sierra "Scarlett"

"Refining Sierra"
N2TRUX is offline   Reply With Quote
Old 04-22-2007, 11:02 PM   #2
BaddBusa2005
Registered User
 
BaddBusa2005's Avatar
 
Join Date: Feb 2006
Location: Cleveland, TN
Posts: 440
Re: What did you get done? 04/22

Dropped the rear of my truck 2", and put my guage cluster, guage bezel, and dash back in.
__________________
1981 Custom Deeluxe SWB 5.3/4L60e 3.73 and Auburn. Mustang Dyno 265hp/258tq
BaddBusa2005 is offline   Reply With Quote
Old 04-22-2007, 11:11 PM   #3
benoit454
Chris
 
benoit454's Avatar
 
Join Date: Nov 2004
Location: Monaville, WV
Posts: 3,737
Re: What did you get done? 04/22

We took the 84 c10 down friday and hauled 2 loads of dirt to fill in a hole in the backyard. Then on sat. we loaded up the weedeater, and chainsaw and cleared seom weeds and brush on the property we are getting from my uncle.

Today, sunday, I went four wheeling in the mountains with my mom and her boyfriend again.
__________________
Chris



GIT R DONE!!!!!!

Check out all our rides,
http://www.cardomain.com/id/benwa454
benoit454 is offline   Reply With Quote
Old 04-22-2007, 11:20 PM   #4
SSC's76
No No
 
SSC's76's Avatar
 
Join Date: Jun 2005
Location: Pueblo Colorado
Posts: 1,781
Re: What did you get done? 04/22

Took the firechicken home and pulled the seats and did some cleaning. Slaped my amp and sub back in it. I was going to chase the turn signal problem down but got a call from my brother and ran out to his place and helped him do the timing belt and water pump in his 95 626. Took 5 hours since he doesent have squat for tools but got it done. Sure does run better now since the timing belt isnt 3 teeth off anymore. Working without air tools sucks, working without any of the proper tools is freaking insane!!!!
__________________
1976 Custom Deluxe SWB Med FMB.3/4 Drop.
Gen VI 454, Muncie HD 3 speed With Modified OE Hurst Shifter, 3.73 12 bolt, GMPP HO roller cam, Hooker headers, Performer intake with modified Q-jet, Accel distributor. Best 1/4 12.3 @108. Funnest run 19.84 @88 full 1/4 mile burn out.
1997 K1500 ext cab 5.7 stock except muffler
SSC's76 is offline   Reply With Quote
Old 04-22-2007, 11:21 PM   #5
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
Re: What did you get done? 04/22

I didn't see you @ the shop..... when was this 'suprise visit'?

I worked on my Beater. . .....
I finished my stainless lowering blocks & got them installed. I needed these in place so I could install the new 'long' panhard bar & mock-up its 'new' relocated mount. I removed the old Firestones to swap in the new Slams. I pulled the lower shock mounts back off to open up the mounting holes from 1/2" to the larger 9/16" hole for the Bilsteins. I played around w/the Blazer tank relocation too.

I hopefully helped n2billet out by selling him the short fleet bedsides I had stashed away.....

We also watched the Stars outlast the Canuuks for a play-off Game 7.

Today I played around w/the Blazer tank relocation some more but got frustrated on how I was going to mount it in place vs. how it's supposed to be mounted. I posted a thread in the 67-72 section if anyone has any suggestions.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote
Old 04-23-2007, 12:44 AM   #6
bad_burb
Registered User
 
bad_burb's Avatar
 
Join Date: Aug 2005
Location: Vallejo, California
Posts: 659
Re: What did you get done? 04/22

I spent the weekend at the annual Kool April Nights event in Redding CA. The cruise was great on Friday night but it rained for the entire show on Saturday. We still had a great time
__________________
'73 C-30 3+3 Dually 454/TH400

'74 Fleetside 350/TH350 (SOLD)
'69 Nova 350/TH350 (project FOR SALE)
'63 Nova 305/TH350 3.73 posi (the wife's project)
bad_burb is offline   Reply With Quote
Old 04-23-2007, 01:30 AM   #7
82c10
needin' money
 
Join Date: May 2005
Location: Chickasha, Oklahoma
Posts: 1,106
Re: What did you get done? 04/22

friday i finished up my 2nd trimester of college(now have 28 hours in), and i took the fuel rail, and injectors of an 03 cobra blower,and went to my brothers graduation. saturday i took a tranny off the back of a 4v 4.6, then went to my bro's graduation party, after it i loaded up the recliner in the bed of his truck, and then rode on the recliner on the way to his house(people were looking at me funny), then sunday i went to church
__________________
SWB Stands for Short Wide Bed
82c10 is offline   Reply With Quote
Old 04-23-2007, 01:30 AM   #8
EJC78
No Life Like Low Life
 
EJC78's Avatar
 
Join Date: Nov 2005
Location: Gilroy,CA
Posts: 367
Re: What did you get done? 04/22

Well I started to box my frame in on Saturday here are some pics. I also finally finished the 60 Impala (yeah right) well at least I'll be able to cruise it this summer.
Attached Images
     

Last edited by EJC78; 04-24-2007 at 12:03 AM. Reason: add pic
EJC78 is offline   Reply With Quote
Old 04-23-2007, 01:43 AM   #9
Ivan D.
glamoros piece o' lowlife
 
Ivan D.'s Avatar
 
Join Date: Mar 2007
Location: Redford, MI
Posts: 1,164
Re: What did you get done? 04/22

We got some pretty awesome weather here, so I spend most of it out working on the cars - Saturday afternoon I was chasing a power management glitch in our '95 GTP's sunroof, turns out there was a cold solder connection in the circuit board. Saturday night I re-routed the hydro-boost return lines in my truck, old one was getting a bad kink right under the power steering pump, and now everything is much smoother. May redo them again when the fluid level drops down again (it does slowly, booster leaks a little upon release of the pedal), but for now they look okay.

Sunday noon I re-painted my car's rear fender from where I hit the carport's column Friday night while taking off like a bat outta hell. Early afternoon I spend re-attaching the GTP's front bumper (friend over a speed bump and hit it bad), then realized the damn sunroof still ain't working right so I spent the whole evening bypassing it - all the old electronics is now ripped out, the motor is directly powered from the switch through 12awg wires (stock is like 16, real tiny), and sunroof moves like nobody's business. Truck just got a clean-up of the bed couple of hours ago, still gotta wash it tho...
__________________
The more I drink, the more I drink, the more I drink...
diesel, reg cab, long bed, 4 across the rear, single stack, wooden stakes, and lotsa lights - the Hay Express
Ivan D. is offline   Reply With Quote
Old 04-23-2007, 10:28 AM   #10
jdmaffeo
Registered User
 
jdmaffeo's Avatar
 
Join Date: Dec 2005
Location: Dallas, TX
Posts: 241
Re: What did you get done? 04/22

Worked a charity event Saturday evening/night and was able to watch Jay Leno live for 2 hours! Funny stuff. Since he wasn't on TV it was un-censored and very funny! I'm sure that some of the stiff shirts didn't find some of it funny though. LOL....

Sunday I was able to get my c-notch and flip kit installed. That was an all day project. Since I have no welding equipment I had to do the bolt in for now. I need to find someone that can weld! I will finish up the rear brakes tonight and get it onto the ground. Hopefully I will get some pictures tonight! I am hoping to finish getting this truck on the road by the end of the week.
__________________
1984 Chevy Stepside, 4spd granny, 4 1/2 front/6 inch rear drop.
jdmaffeo is offline   Reply With Quote
Old 04-23-2007, 11:11 AM   #11
Slonaker
Insert Witty Text Here
 
Slonaker's Avatar
 
Join Date: Oct 2002
Location: San Antonio, TX
Posts: 3,415
Re: What did you get done? 04/22

My wife and I spent all day Friday and Saturday in the sun selling off my Dad's stuff at the New Braunfels Swap Meet. We were also there about a half day in the rain Sunday. I'm exhausted.

I had an endless stream of people asking if my truck was for sale (it isn't). I saw a '73 stepside SWB with a clean body. It looked like it might need cab corners, and it was marked $750 OBO. I don't know any details about it, but I was surprised that it took them until late Saturday to sell it. I really wanted it, but don't have the time, money, or space for it.

Slonaker
__________________
'86 Chevy C10 (Sold 04/19/13 )
Stock '01 Silverado
Slonaker is offline   Reply With Quote
Old 04-23-2007, 11:24 AM   #12
Russell
Professional Grade
 
Russell's Avatar
 
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
Re: What did you get done? 04/22

I got my 80's interior almost back together, gotta finish cleaning up one more kick panel, find myself either a wood-grain, or brushed aluminum A/C dash insert, and a carpet to finish it right off. Since today is finally nice out, I'll be pushing the truck outside to pull the TPI, so I can snap a few pictures then
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)
Russell is offline   Reply With Quote
Old 04-23-2007, 11:47 AM   #13
wedgemon
Registered User
 
wedgemon's Avatar
 
Join Date: Jul 2004
Location: Spanish Springs, NV
Posts: 1,171
Re: What did you get done? 04/22

I SHOULDA gon to Cool April Night,too!! Spent two days swapping to a tilt column.

Important swap tip: INVEST IN THE LOCK PLATE TOOL!! It would have saved me about 5 hours!!

- Dave
__________________
2003 Silverado K1500 Z71 - Arrival Blue
1973 K5 Cheyenne Blazer 350/TH350/NP203
Kids Trucks:92 K1500 Blazer 5.7/700R4 4" lift.

RETIRED: 1980 Scottsdale 4x4

Founding Member:
"TILT WHEEL BELLY." Club
wedgemon is offline   Reply With Quote
Old 04-23-2007, 03:54 PM   #14
Srubydo1986
The Crazy Machanic
 
Srubydo1986's Avatar
 
Join Date: Jan 2007
Location: Nokesville Va
Posts: 1,437
Re: What did you get done? 04/22

got my truck in my name and went for a drive. Still has some issues but now i have tags and i can find them. one it virbration (u joint maybe it is the original on i think) other is a tranny leak (dip stick tube issues) last is over heating (didnt have enough water) any thing else is just a nickel and dime crap.

One last thing is the speedo gear cable is whining horray.
__________________
*1986 Sliverado longbed 400 small block mean as hell, 700r4 trans (5 speed coming one day)

* 1970 chevelle 2dr sedan Latest update June 24 2007.

*1957 4 door stationwagon - pink all original needing a good restore (body great, floors bad)

newest additions
1965 shortbed fleet great granddads. Been told im nuts to bring it back from the dead (still going to happen) plans-all stock with a turbo 292 inline 3 speed column shift. and thats it

big block 427 and 5 speed trans and ford 9 inch theyhave no home yet thinking what to put them in

and a 79 c60 trash truck um no idea i have one
Srubydo1986 is offline   Reply With Quote
Old 04-23-2007, 07:05 PM   #15
boatpuller
Registered User
 
boatpuller's Avatar
 
Join Date: Sep 2005
Location: Sun City West, Az
Posts: 3,822
Re: What did you get done? 04/22

modified some 6x9 boxes and dynamatted them into cab corners.turned out nice.
__________________
" Never look up a dead dogs butt."
boatpuller is offline   Reply With Quote
Old 04-23-2007, 07:19 PM   #16
kevinr1970
Senior Member
 
Join Date: Aug 2004
Location: Everett, WA
Posts: 2,316
Re: What did you get done? 04/22

Saturday I installed a new water-pump on my 82' K5.
Since I had the front of the engine mostly apart I decided I should do some touch-up painting. Painted the alternator bracket, water-pump, power-steering pump/bracket, AC compressor.bracket.

I kind of half-assed it by not taking the PS pump or AC compressor off the brackets but they look 100% better with fresh paint in the brackets and pulleys.
I did spray about two cans of engine degreaser on the front and got rid of a bunch of built up fudge. I also pulled the carb off so I was able to paint the front all the way back to the distributor. Not show quality but pretty much everything you can see looks fresh.
__________________
2009 Honda Fit CfC (bsf 44.9 mpg)
2000 Tahoe Limited
1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below
1991 GMC CrewCab Dually 4x4, just going to fix things up for now
1982/1989 K5/GMC Jimmy 2wd
1987 GMC 1/2 ton swb 2wd Crew (sold)

Last edited by kevinr1970; 04-23-2007 at 07:19 PM.
kevinr1970 is offline   Reply With Quote
Old 04-24-2007, 07:28 AM   #17
87 STEPPER
STILL PLAYS WITH TRUX
 
87 STEPPER's Avatar
 
Join Date: Nov 2002
Location: Melbourne, Fla.
Posts: 2,764
Thumbs up Re: What did you get done? 04/22

I went to the Super Chevy Show in Memphis with the Tahoe and pick up a few items while i was there.

Name:  e9c9c4a9[1].jpg
Views: 146
Size:  59.9 KB

Name:  e9c9c46e[1].jpg
Views: 148
Size:  56.0 KB

Name:  e9c9c486[1].jpg
Views: 148
Size:  52.0 KB

Name:  e9c9c478[1].jpg
Views: 145
Size:  47.5 KB
__________________
~~Bruce~~

MY 87 STEPPER

MY 99 2D/WD TAHOE
87 STEPPER is offline   Reply With Quote
Old 04-24-2007, 12:45 PM   #18
1987 Shortwide
Senior Member
 
Join Date: Feb 2003
Location: Wichita KS
Posts: 610
Re: What did you get done? 04/22

Friday after work I stopped by the body shop and chatted about my 87 as far as body and paint is concerned. Then I went home, stripped the chrome trim off my sierra and detailed it.

Saturday we hit the turnpike at 7am heading to Tulsa for the Clash of the Titans street car shootout. Didn't get back home till 1:30am sunday morning.

Sunday I woke up and headed across town to do a vinyl job on a boat.



I think the trip to tulsa did the Transfer case in the sierra in though
It makes some pretty horrible noise now.
__________________
~Steve~
Friesen High Performance Auto and Graphics
Toy: 87 Shortwide, 406 smallblock with a little boost
My 87 buildup
Daily Driver: 99 Sierra SLE 4X4. Black on Black and harder than hell to keep clean.
1987 Shortwide is offline   Reply With Quote
Old 04-25-2007, 01:02 AM   #19
bad_burb
Registered User
 
bad_burb's Avatar
 
Join Date: Aug 2005
Location: Vallejo, California
Posts: 659
Re: What did you get done? 04/22

Quote:
Originally Posted by wedgemon View Post
I SHOULDA gon to Cool April Night,too!! Spent two days swapping to a tilt column.

Important swap tip: INVEST IN THE LOCK PLATE TOOL!! It would have saved me about 5 hours!!

- Dave

Don't worry you didn't miss much. It rained all day Sat. during the car show
__________________
'73 C-30 3+3 Dually 454/TH400

'74 Fleetside 350/TH350 (SOLD)
'69 Nova 350/TH350 (project FOR SALE)
'63 Nova 305/TH350 3.73 posi (the wife's project)
bad_burb is offline   Reply With Quote
Old 04-25-2007, 11:49 AM   #20
Hoods69BadBowTie
Chevys Kick A$$
 
Hoods69BadBowTie's Avatar
 
Join Date: Jan 2005
Location: Zootown, MT
Posts: 12,699
Re: What did you get done? 04/22

I tinkered with my stereo in my Cavy for a little while. Cleaned my cavy out as well. Got some laundry and house chores done and that was about it!
__________________
*HOODS is what I answer too*
-'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold
-'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit
-'86 K5 Blazer Silverado 6.2 4" lift 35"s
-'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's
-'83 Monte Carlo T-Tops. 126,500 Original Miles
-LATER
I would rather push a Chevy then drive a ford!!
Hoods69BadBowTie is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:03 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com