72 cheyenne project 4sale With swb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1991s10 · 04-24-2007, 07:39 PM

It's a SUPER Cheyenne

I've got a 72 i was gonna build but i changed my mind. Here's what i've got.
72 lwb,comes with a swb frame and bed also. The truck has headers,b&m shifter,4core rad,350 turbo tranny with shift kit,new cab corners,new rocker panels,1 piece driveshaft,6 doors total,extra hood,good grill,extra doorpanels,
tilt wheel,extra glovebox doors and so on.There's alot of extra parts i'm probably forgeting but that's the most part. I can email pics and here's a few. I do not have the long bed anymore.

I'm located near Dallas 1,600 for the truck and parts. I really don't want to part everything out.

http://new.photos.yahoo.com/goneraci...60762389123284

otsenre · 04-24-2007, 09:24 PM

Do you have pics of shortbed and the frame. Does it run and drive? Interested!
ernest9368@msn.com

1991s10 · 04-24-2007, 09:27 PM

no motor I will send pics

**Hart_Rod** · 04-24-2007, 09:40 PM

Is it a factory tilt?

1991s10 · 04-24-2007, 09:43 PM

No sombody has changed it and it uses the key on the column

1991s10 · 04-25-2007, 09:43 PM

I also have a 12 bolt with 3.73 and a posi that is 6 lug with no drums on it for 100.00 Coil spring rearend

noahdallas · 04-25-2007, 11:54 PM

Quote:

Originally Posted by 1991s10

I also have a 12 bolt with 3.73 and a posi that is 6 lug with no drums on it for 100.00 Coil spring rearend

I will take the rear end pending it is a posi and not welded together?

Is this the same rear end you had on another post and "BIGHEAD" claimed it? Let me know....

1991s10 · 04-26-2007, 06:43 AM

Yea it's the same 1.I don't think he wants it anymore.So whoever shows up
1st gets it.

noahdallas · 04-26-2007, 07:41 AM

Quote:

Originally Posted by 1991s10

I also have a 12 bolt with 3.73 and a posi that is 6 lug with no drums on it for 100.00 Coil spring rearend

pm sent...

Dizzy · 04-26-2007, 10:28 AM

PM me and let me know if you are willing to sell just the short bed.

1991s10 · 04-26-2007, 07:29 PM

Pm's sent to both of yall

1991s10 · 04-26-2007, 08:31 PM

It's not welded. It's a posi i pulled the cover today

[QUOTE=noahdallas;2145060]I will take the rear end pending it is a posi and not welded together?

noahdallas · 04-26-2007, 10:39 PM

I would like to get it but some things came up today... so I will have to pass... thanks...

[QUOTE=1991s10;2146357]It's not welded. It's a posi i pulled the cover today

Quote:

Originally Posted by noahdallas

I will take the rear end pending it is a posi and not welded together?

jorgensensc · 04-26-2007, 11:13 PM

How is the grill (inner and outer) Is it in good shape, dent free. If so how much for it? I would also be interested in the driverside front fender if you would sell it. I could probably pick up within a couple of weaks, let me know please!
Shawn

1991s10 · 04-27-2007, 06:29 AM

I really want to sell everything together except for maybe the bed and rearend.

jorgensensc · 04-27-2007, 08:42 AM

If you decide to part it out, Please keep me in mind. I really would like a good fender and grill for my truck so I can begin paint and bodywwork.
Thanks!
Shawn

1991s10 · 04-27-2007, 05:50 PM

My fenders were not the greastest but if i part it out i will let you know on the grill.

1,200 takes everything

jsbgump · 04-27-2007, 08:31 PM

how much for the posi rear?

1991s10 · 04-27-2007, 09:13 PM

100.00 It might go on ebay this weekend 214 455 2975 Robert

jsbgump · 04-27-2007, 09:19 PM

do you know the gear ratio? I'm very interested. Please Pm me I just had shoulder surgery an have to figure out how I could get it.

1970bowtie · 04-27-2007, 09:30 PM

im intrested in the bed,given that it is a short wide
got any pics?

jsbgump · 04-27-2007, 10:32 PM

I jkust re read the thread I'll have to pass on the rear being a 6 lugger

1991s10 · 04-27-2007, 10:39 PM

Quote:

Originally Posted by 1970bowtie

im intrested in the bed,given that it is a short wide
got any pics?

It is pm sent

04-24-2007, 07:39 PM	#1
1991s10 Registered User Join Date: Jul 2005 Location: Caddo Mills Texas 30 miles east of Dallas Posts: 133	72 cheyenne project 4sale With swb It's a SUPER Cheyenne I've got a 72 i was gonna build but i changed my mind. Here's what i've got. 72 lwb,comes with a swb frame and bed also. The truck has headers,b&m shifter,4core rad,350 turbo tranny with shift kit,new cab corners,new rocker panels,1 piece driveshaft,6 doors total,extra hood,good grill,extra doorpanels, tilt wheel,extra glovebox doors and so on.There's alot of extra parts i'm probably forgeting but that's the most part. I can email pics and here's a few. I do not have the long bed anymore. I'm located near Dallas 1,600 for the truck and parts. I really don't want to part everything out. http://new.photos.yahoo.com/goneraci...60762389123284 Last edited by 1991s10; 04-24-2007 at 08:15 PM.

04-24-2007, 09:24 PM	#2
otsenre Registered User Join Date: Feb 2007 Location: Colorado Springs, Co Posts: 1,939	Re: 72 cheyenne project 4sale With swb Do you have pics of shortbed and the frame. Does it run and drive? Interested! ernest9368@msn.com

04-24-2007, 09:27 PM	#3
1991s10 Registered User Join Date: Jul 2005 Location: Caddo Mills Texas 30 miles east of Dallas Posts: 133	Re: 72 cheyenne project 4sale With swb no motor I will send pics

04-24-2007, 09:40 PM	#4
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,862	Re: 72 cheyenne project 4sale With swb Is it a factory tilt? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

04-24-2007, 09:43 PM	#5
1991s10 Registered User Join Date: Jul 2005 Location: Caddo Mills Texas 30 miles east of Dallas Posts: 133	Re: 72 cheyenne project 4sale With swb No sombody has changed it and it uses the key on the column

04-25-2007, 09:43 PM	#6
1991s10 Registered User Join Date: Jul 2005 Location: Caddo Mills Texas 30 miles east of Dallas Posts: 133	Re: 72 cheyenne project 4sale With swb I also have a 12 bolt with 3.73 and a posi that is 6 lug with no drums on it for 100.00 Coil spring rearend

04-26-2007, 06:43 AM	#8
1991s10 Registered User Join Date: Jul 2005 Location: Caddo Mills Texas 30 miles east of Dallas Posts: 133	Re: 72 cheyenne project 4sale With swb Yea it's the same 1.I don't think he wants it anymore.So whoever shows up 1st gets it.

04-26-2007, 10:28 AM	#10
Dizzy Registered User Join Date: Mar 2007 Location: Houston Posts: 45	Re: 72 cheyenne project 4sale With swb PM me and let me know if you are willing to sell just the short bed.

04-26-2007, 07:29 PM	#11
1991s10 Registered User Join Date: Jul 2005 Location: Caddo Mills Texas 30 miles east of Dallas Posts: 133	Re: 72 cheyenne project 4sale With swb Pm's sent to both of yall

04-26-2007, 08:31 PM	#12
1991s10 Registered User Join Date: Jul 2005 Location: Caddo Mills Texas 30 miles east of Dallas Posts: 133	Re: 72 cheyenne project 4sale With swb It's not welded. It's a posi i pulled the cover today [QUOTE=noahdallas;2145060]I will take the rear end pending it is a posi and not welded together?

04-26-2007, 11:13 PM	#14
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: 72 cheyenne project 4sale With swb How is the grill (inner and outer) Is it in good shape, dent free. If so how much for it? I would also be interested in the driverside front fender if you would sell it. I could probably pick up within a couple of weaks, let me know please! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

04-27-2007, 06:29 AM	#15
1991s10 Registered User Join Date: Jul 2005 Location: Caddo Mills Texas 30 miles east of Dallas Posts: 133	Re: 72 cheyenne project 4sale With swb I really want to sell everything together except for maybe the bed and rearend.

04-27-2007, 08:42 AM	#16
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: 72 cheyenne project 4sale With swb If you decide to part it out, Please keep me in mind. I really would like a good fender and grill for my truck so I can begin paint and bodywwork. Thanks! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

04-27-2007, 05:50 PM	#17
1991s10 Registered User Join Date: Jul 2005 Location: Caddo Mills Texas 30 miles east of Dallas Posts: 133	Re: 72 cheyenne project 4sale With swb My fenders were not the greastest but if i part it out i will let you know on the grill. 1,200 takes everything Last edited by 1991s10; 04-27-2007 at 06:25 PM.

04-27-2007, 08:31 PM	#18
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: 72 cheyenne project 4sale With swb how much for the posi rear? __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616



Register or Log In To remove these advertisements.

04-27-2007, 09:13 PM	#19
1991s10 Registered User Join Date: Jul 2005 Location: Caddo Mills Texas 30 miles east of Dallas Posts: 133	Re: 72 cheyenne project 4sale With swb 100.00 It might go on ebay this weekend 214 455 2975 Robert

04-27-2007, 09:19 PM	#20
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: 72 cheyenne project 4sale With swb do you know the gear ratio? I'm very interested. Please Pm me I just had shoulder surgery an have to figure out how I could get it. __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

04-27-2007, 09:30 PM	#21
1970bowtie Senior Member Join Date: Apr 2007 Location: East Texas Posts: 549	Re: 72 cheyenne project 4sale With swb im intrested in the bed,given that it is a short wide got any pics?

04-27-2007, 10:32 PM	#22
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: 72 cheyenne project 4sale With swb I jkust re read the thread I'll have to pass on the rear being a 6 lugger __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

Register or Log In To remove these advertisements.