CST transfer case shift handle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

onetonk5 · 05-22-2007, 07:59 PM

Chrome shift handle,knob and boot....some pitting but still quite nice
$75 plus shipping

Down south truckin · 05-22-2007, 10:07 PM

man you know i needed that! do you also have the bolt/linkage/shifter boot ring?

onetonk5 · 05-22-2007, 10:22 PM

yep.....but it wasnt in the trade...thats why I brought it with the high hump today.

Down south truckin · 05-22-2007, 10:39 PM

i did'nt mean you owe it to me i just wish you would have mentioned it of course i,m a cheapskate and would have lowballed you how much for the knob,shifter,boot,ring,bolt,linkage and everthing? shipped to 30047 or delivered next time your up here?

onetonk5 · 05-22-2007, 10:48 PM

I was willing to trade all the shifter stuff and my high hump for a high hump with no holes...like i said in my pm

Down south truckin · 05-22-2007, 10:48 PM

as i looked back at my original p/m asking you what your bottom dollar was the shifter was included in that p/m check it out for yourself sent on 5-18-2007 at 1:14am thanks Mike

onetonk5 · 05-22-2007, 10:54 PM

resend me that pm if you dont mind

onetonk5 · 05-22-2007, 11:49 PM

For anyone interested this is the PM thats in question:
no counter offer? whats the bottom[/QUOTE]
I can go 500 for the tranny/transfer, springs and both trans crossmembers. Got to remember that practically delivered too.[/QUOTE]

Bump on the shifter

onetonk5 · 05-23-2007, 01:29 PM

$50 plus shipping

onetonk5 · 05-23-2007, 07:48 PM

Pics
Tried to show all scuffs/wear.

onetonk5 · 05-23-2007, 11:37 PM

Willing to trade for Clean BB high hump.
No holes.

CrashEd · 05-24-2007, 12:11 AM

Is it for a NP205 case.

onetonk5 · 05-24-2007, 07:15 AM

Yes its for a 205

OLDCHEV4X4 · 05-24-2007, 07:23 AM

It looks like a 4 speed shifter with a transfercase knob. Can i see the linkage end?

onetonk5 · 05-24-2007, 09:40 PM

Sure...are you interested or just looking for more pics?

1969k10stepside · 05-24-2007, 11:09 PM

Quote:

Originally Posted by OLDCHEV4X4

It looks like a 4 speed shifter with a transfercase knob. Can i see the linkage end?

I went out and looked at my CST chrome t-case shifter for my NP205 and it looks the same as the one in the pics onetonk5 posted.
Good price on the shifter assembly.TTT for ya

onetonk5 · 05-24-2007, 11:14 PM

60 shipped to lower 48

CrashEd · 05-25-2007, 12:27 AM

Ill do the no holes BB high hump trade then. Let me get it out of the truck tomorow and see if its all rust free. Its should be the cabs preaty clean. pictures might be a problem my daughter droped and brock my camera 2nd one in 6 months Grrraaaa.
Ed

onetonk5 · 05-25-2007, 06:09 PM

Just let me know.
Mark

sakohntr · 05-27-2007, 11:36 AM

If this falls through pm me and ill get you a high hump no hole cover......

CrashEd · 05-27-2007, 11:50 AM

Go ahead my back is out and it will be some time before i get out to get it off the truck. Sorry
Ed

sakohntr · 05-28-2007, 02:50 PM

Here she is in this vintage patina state as i acquired her from the #1 parts source in kansas.... sent you a pm

onetonk5 · 05-28-2007, 04:03 PM

Looks good to me....just let me know when your ready to ship.
Thanks
Mark

teeitup · 05-28-2007, 05:56 PM

Your funny Bruce!!!!!!!!!!

05-22-2007, 10:07 PM	#2
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: CST transfer case shift handle man you know i needed that! do you also have the bolt/linkage/shifter boot ring?

05-22-2007, 10:22 PM	#3
onetonk5 Cereal Killer Join Date: Jan 2006 Location: Montgomery, Alabama Posts: 639	Re: CST transfer case shift handle yep.....but it wasnt in the trade...thats why I brought it with the high hump today. __________________ If I dont do it....somebody else will.

05-22-2007, 10:39 PM	#4
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: CST transfer case shift handle i did'nt mean you owe it to me i just wish you would have mentioned it of course i,m a cheapskate and would have lowballed you how much for the knob,shifter,boot,ring,bolt,linkage and everthing? shipped to 30047 or delivered next time your up here?

05-22-2007, 10:48 PM	#5
onetonk5 Cereal Killer Join Date: Jan 2006 Location: Montgomery, Alabama Posts: 639	Re: CST transfer case shift handle I was willing to trade all the shifter stuff and my high hump for a high hump with no holes...like i said in my pm __________________ If I dont do it....somebody else will.

05-22-2007, 10:48 PM	#6
Down south truckin Senior Member Join Date: Feb 2006 Location: Lilburn Georgia Posts: 1,240	Re: CST transfer case shift handle as i looked back at my original p/m asking you what your bottom dollar was the shifter was included in that p/m check it out for yourself sent on 5-18-2007 at 1:14am thanks Mike Last edited by Down south truckin; 05-22-2007 at 10:50 PM.

05-22-2007, 07:59 PM	#1
onetonk5 Cereal Killer Join Date: Jan 2006 Location: Montgomery, Alabama Posts: 639	CST transfer case shift handle Chrome shift handle,knob and boot....some pitting but still quite nice $75 plus shipping __________________ If I dont do it....somebody else will.

05-22-2007, 10:54 PM	#7
onetonk5 Cereal Killer Join Date: Jan 2006 Location: Montgomery, Alabama Posts: 639	Re: CST transfer case shift handle resend me that pm if you dont mind __________________ If I dont do it....somebody else will.

05-22-2007, 11:49 PM	#8
onetonk5 Cereal Killer Join Date: Jan 2006 Location: Montgomery, Alabama Posts: 639	Re: CST transfer case shift handle For anyone interested this is the PM thats in question: no counter offer? whats the bottom[/QUOTE] I can go 500 for the tranny/transfer, springs and both trans crossmembers. Got to remember that practically delivered too.[/QUOTE] Bump on the shifter __________________ If I dont do it....somebody else will.

05-23-2007, 01:29 PM	#9
onetonk5 Cereal Killer Join Date: Jan 2006 Location: Montgomery, Alabama Posts: 639	Re: CST transfer case shift handle $50 plus shipping __________________ If I dont do it....somebody else will.

05-23-2007, 07:48 PM	#10
onetonk5 Cereal Killer Join Date: Jan 2006 Location: Montgomery, Alabama Posts: 639	Re: CST transfer case shift handle Pics Tried to show all scuffs/wear. Attached Images __________________ If I dont do it....somebody else will.

05-23-2007, 11:37 PM	#11
onetonk5 Cereal Killer Join Date: Jan 2006 Location: Montgomery, Alabama Posts: 639	Re: CST transfer case shift handle Willing to trade for Clean BB high hump. No holes. __________________ If I dont do it....somebody else will.

05-24-2007, 12:11 AM	#12
CrashEd 72 chevy Join Date: Jan 2007 Location: Central Il Posts: 725	Re: CST transfer case shift handle Is it for a NP205 case.

05-24-2007, 07:15 AM	#13
onetonk5 Cereal Killer Join Date: Jan 2006 Location: Montgomery, Alabama Posts: 639	Re: CST transfer case shift handle Yes its for a 205 __________________ If I dont do it....somebody else will.

05-24-2007, 07:23 AM	#14
OLDCHEV4X4 Registered User Join Date: Apr 2000 Location: Chester County PA, USA Posts: 1,228	Re: CST transfer case shift handle It looks like a 4 speed shifter with a transfercase knob. Can i see the linkage end? __________________ 72 k/10 short wideside 72 k/5 Blazer 72 K/5 Blazer - obstacle course racer 72 custom/10 8' bed 70 K/5 Blazer 67 C-30 GMC Flat bed 86 GMC K2500 Plow Truck 85 GMC K3500 84 M1008 85 M1008 77 G30 Motor Home 72 Sears 12hp Tractor Glenmoore, Pennsylvania

05-24-2007, 09:40 PM	#15
onetonk5 Cereal Killer Join Date: Jan 2006 Location: Montgomery, Alabama Posts: 639	Re: CST transfer case shift handle Sure...are you interested or just looking for more pics? Attached Images __________________ If I dont do it....somebody else will.



Register or Log In To remove these advertisements.

05-24-2007, 11:14 PM	#17
onetonk5 Cereal Killer Join Date: Jan 2006 Location: Montgomery, Alabama Posts: 639	Re: CST transfer case shift handle 60 shipped to lower 48 __________________ If I dont do it....somebody else will.

05-25-2007, 12:27 AM	#18
CrashEd 72 chevy Join Date: Jan 2007 Location: Central Il Posts: 725	Re: CST transfer case shift handle Ill do the no holes BB high hump trade then. Let me get it out of the truck tomorow and see if its all rust free. Its should be the cabs preaty clean. pictures might be a problem my daughter droped and brock my camera 2nd one in 6 months Grrraaaa. Ed

05-25-2007, 06:09 PM	#19
onetonk5 Cereal Killer Join Date: Jan 2006 Location: Montgomery, Alabama Posts: 639	Re: CST transfer case shift handle Just let me know. Mark __________________ If I dont do it....somebody else will.

05-27-2007, 11:36 AM	#20
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	Re: CST transfer case shift handle If this falls through pm me and ill get you a high hump no hole cover...... __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

05-27-2007, 11:50 AM	#21
CrashEd 72 chevy Join Date: Jan 2007 Location: Central Il Posts: 725	Re: CST transfer case shift handle Go ahead my back is out and it will be some time before i get out to get it off the truck. Sorry Ed

05-28-2007, 02:50 PM	#22
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	Re: CST transfer case shift handle Here she is in this vintage patina state as i acquired her from the #1 parts source in kansas.... sent you a pm Attached Images __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

05-28-2007, 04:03 PM	#23
onetonk5 Cereal Killer Join Date: Jan 2006 Location: Montgomery, Alabama Posts: 639	Re: CST transfer case shift handle Looks good to me....just let me know when your ready to ship. Thanks Mark __________________ If I dont do it....somebody else will.

05-28-2007, 05:56 PM	#24
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: CST transfer case shift handle Your funny Bruce!!!!!!!!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.