Need Fleetside Panels For My '79 C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fredschevy · 06-12-2007, 03:02 AM

HI, I NEED SHORTBOX FLEETSIDE PANELS FOR MY '79 C10. LMC AND AMERICAN CLASSIC ARE BOTH SAYING THESE PANELS ARE DISCONTINUED!

CAN ANYONE HELP RE-DIRECT ME, IS THERE SOME PLACE I AM MISSING?

I NEED A FRONT WING ASWELL

THANKS
FRED

SKarpenz · 06-12-2007, 03:17 AM

http://www.brotherstrucks.com/products.asp?dept=900

There ya go man. Brothers has a lot of stuff you might need.

**old Rusty C10** · 06-12-2007, 08:01 AM

Check the board vendor list im sure one of them if not more have them for ya

fredschevy · 06-12-2007, 10:19 AM

Thanks,

I am holding at the moment to talk to BROTHERS and I can't find the vendors bit on this site 'cos I'm stupid.

**Captkaos** · 06-12-2007, 01:23 PM

Here is the link to the Board Vendors:
http://67-72chevytrucks.com/vboard/showgroups.php

You can tell by their username, it is RED.

fredschevy · 06-12-2007, 01:53 PM

I'm getting bit worried as I have spoken to LMC & BROTHERS AND E-MAILED A WHOLE lot of others ( I was shouting just then) and no-one stocks a right hand fleet panel for a SWB with a square gas filler cap, so I guess I will just get one without a filler cap and custom position the gas hose just infront of the rear wheel, as there is tons of room in there, and fill it with gas from inside the wheel arch.

06-12-2007, 03:02 AM	#1
fredschevy New Member Join Date: Jun 2007 Location: west sussex, england Posts: 14	NEW GUY, WHERE CAN I BUY Fleetside Panels For My '79 C10 HI, I NEED SHORTBOX FLEETSIDE PANELS FOR MY '79 C10. LMC AND AMERICAN CLASSIC ARE BOTH SAYING THESE PANELS ARE DISCONTINUED! CAN ANYONE HELP RE-DIRECT ME, IS THERE SOME PLACE I AM MISSING? I NEED A FRONT WING ASWELL THANKS FRED Attached Images Last edited by fredschevy; 06-12-2007 at 03:11 AM.

06-12-2007, 03:17 AM	#2
SKarpenz Registered User Join Date: Jun 2007 Location: Valdosta Posts: 71	Re: Need Fleetside Panels For My '79 C10 http://www.brotherstrucks.com/products.asp?dept=900 There ya go man. Brothers has a lot of stuff you might need.

06-12-2007, 08:01 AM	#3
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	Re: Need Fleetside Panels For My '79 C10 Check the board vendor list im sure one of them if not more have them for ya __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

06-12-2007, 10:19 AM	#4
fredschevy New Member Join Date: Jun 2007 Location: west sussex, england Posts: 14	Re: Need Fleetside Panels For My '79 C10 Thanks, I am holding at the moment to talk to BROTHERS and I can't find the vendors bit on this site 'cos I'm stupid. Last edited by fredschevy; 06-12-2007 at 10:19 AM.

06-12-2007, 01:23 PM	#5
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: Need Fleetside Panels For My '79 C10 Here is the link to the Board Vendors: http://67-72chevytrucks.com/vboard/showgroups.php You can tell by their username, it is RED. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com Last edited by Captkaos; 06-12-2007 at 01:27 PM.

06-12-2007, 01:53 PM	#6
fredschevy New Member Join Date: Jun 2007 Location: west sussex, england Posts: 14	Re: Need Fleetside Panels For My '79 C10 I'm getting bit worried as I have spoken to LMC & BROTHERS AND E-MAILED A WHOLE lot of others ( I was shouting just then) and no-one stocks a right hand fleet panel for a SWB with a square gas filler cap, so I guess I will just get one without a filler cap and custom position the gas hose just infront of the rear wheel, as there is tons of room in there, and fill it with gas from inside the wheel arch.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.