06-17-2007, 02:05 PM | #1 |
Registered User
Join Date: Jun 2007
Location: Springfield Mo.
Posts: 1,086
|
New Member
New Member here. My name is Joe and I live just outside Springfield, Mo. in a suburb named Battlefield. I found this website from another one that I'm a member of and I think that this site is pretty cool. This seems to be the most active site that I have seen so far. Lots of good info sharing and opinions here. I like that and will be visiting this site quite often now! There also are lots of pictures of cool looking trucks to check out here. I want to post a few pictures of my own.
This is my 1986 K10 Shortbed Scottsdale 4x4. This is what it looked like when I first purchased it in April of 2004. I had quite a bit of rust to deal with as is typical of the 73-87 body style. I'm told that it's kind of rare because it has a 305 with a factory 4-speed transmission. It also has factory air which still works. |
06-17-2007, 02:16 PM | #2 |
Registered User
Join Date: Jun 2007
Location: Springfield Mo.
Posts: 1,086
|
Re: New Member
Pictures of some of the rust that it had. The inner fenders were completely gone, and my front fenders were rusted so bad where they bolt up to the inner fenders that had to scrap them. Replaced them with aftermarket parts which I am not happy with because of fitment issues with the right side. Will be installing GM parts in the future.
|
06-17-2007, 02:29 PM | #3 |
Registered User
Join Date: Jun 2007
Location: Springfield Mo.
Posts: 1,086
|
Re: New Member
Picture of what it looks like right now. I scrapped both of the bumpers. Bought a new front but I am waiting until after I put some GM fenders on before I install it. As for the rear, I'm still undecided whether to buy another drop bumper like it had, install a roll pan, or put a stock chrome rear bumper on.
I added a 4 inch lift with 33 inch Super Swamper TRXUS tires on 15x10 American Racing wheels (wish I'd have gone with 35s to fill up my fenderwells a little bit more) and added a Goodmark cowl induction hood. Drivetrain is still completely stock....for now! I still have a LOT of work to do! I drove this truck over a year before I ever put a wrench on it. This picture was taken in November of 2005. It still looks just like it does in this picture |
06-17-2007, 03:58 PM | #4 |
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,448
|
Re: New Member
Welcome to the board from South Mississippi! Check out the 2007 board for info on a boardwide meet in your area next month. You're welcome to show up with your truck.
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
06-17-2007, 04:06 PM | #5 |
Registered User
Join Date: May 2006
Location: Dickson,Tn
Posts: 811
|
Re: New Member
Welcome from Ky
__________________
Pickles |
06-17-2007, 04:09 PM | #6 |
yeller
Join Date: Oct 2001
Location: Twin Cities
Posts: 13,824
|
Re: New Member
Welcome from MN. You look familiar...
__________________
Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale |
06-17-2007, 04:46 PM | #7 |
Crew Cut
Join Date: Dec 2005
Location: MONTGOMERY,AL
Posts: 757
|
Re: New Member
welcome
__________________
85 SWB 1/2 TON CREWCAB/5.3 03 CHEV 3500 DURAMAX CREW CAB 85 CHEV SWB/TPI 06 CHEV TAHOE (WIFES) 30 MODEL A HOT ROD 07 HARLEY DAVIDSON BAGGER 09 STREET GLIDE AN D A LOT MORE JUNK |
06-17-2007, 05:13 PM | #8 |
Registered User
Join Date: Oct 2006
Location: Wisconsin
Posts: 174
|
Re: New Member
welcome and nice truck!
__________________
1985 C10 SWB- *Project* |
06-17-2007, 06:24 PM | #9 |
Dark Heart Motorsports
Join Date: Apr 2007
Location: 29404 DKFX
Posts: 683
|
Re: New Member
welcome to the forums!
__________________
How Deep Can YOU Bleed..? 1985 Chevy Blazer K5- 6.2 N/A, 400 turbo trans CUCV, 12v converted... a new chapter 2005 GMC Sierra Crew Cab 6.0 powwwaa!!! custom jumpseat install w/ captain seats, Hypertech tuner, MSD Blaster Coils, CB and twin antenna's, all electric interior, touch screen in dash. custom center console, with jump seat replacing original console. 1500 HD! |
06-17-2007, 07:11 PM | #10 |
Cruzzzn' Vet
Join Date: Jan 2005
Location: Porterville,Ca.
Posts: 1,918
|
Re: New Member
Welcome from Cali
Nice 4by |
06-17-2007, 11:57 PM | #11 |
67 Chevy Stepside
Join Date: Mar 2007
Location: Jonesville NC
Posts: 836
|
Re: New Member
welcome from NC. nice truck
__________________
1967 Chevy stepside 1976 BIG DOOLEY 454 turbo 400 4:11 |
06-19-2007, 02:38 PM | #12 |
Registered User
Join Date: Jun 2007
Location: Springfield Mo.
Posts: 1,086
|
Re: New Member
Thanks for the welcome guys! You look familiar too Jeff! If I'd have known about this website I would have visited it sooner! I hope there are other 73-87 GM truck guys in my area that visit this site. Maybe we can help each other work on our trucks as I often have to work on mine alone. ...Joe
|
06-19-2007, 03:58 PM | #13 |
On a budget like Fred Sanford
Join Date: Oct 2005
Location: Topeka, KS
Posts: 2,031
|
Re: New Member
Great looking truck! If I had a 4x4 that'd be the exact look I'd want. Welcome to the board!!
__________________
'85 Silverado swb: 383 stroker, 10.5:1, vortec heads, 232/238 roller cam, RPM air gap, performer 750 carb, stainless longtubes, 3" duals/super 44's, T56/4.11 383ci build / exterior refresh thread '98 Camaro z28: 370ci twin turbo 370ci build '01 Tahoe LT 4x4: 5.3, longtubes/ory, magnaflow duals, custom tune....wife's DD |
06-19-2007, 04:00 PM | #14 |
Droppin' It Like It's Hot!
Join Date: Jun 2007
Location: Battlefield, Missouri
Posts: 2,934
|
Re: New Member
Hello and welcome. I am in Springfield and work in Republic. I am trying to get a club chapter going here locally of Chevy GMC International Truck Club. let me know if you would be interested in helping to get it going.
__________________
Robert
Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE! |
06-19-2007, 04:20 PM | #15 |
What Hump?
Join Date: Apr 2003
Location: New River AZ
Posts: 2,009
|
Re: New Member
WooHoo another 86! welcome from phoenix.
__________________
Lil red 86 c-10 99 Sub 78 Camper Special w/ 454 |
06-19-2007, 09:49 PM | #16 |
Registered User
Join Date: Oct 2006
Location: iowa
Posts: 722
|
Re: New Member
welcome from iowa....and thats not bad rust for the midwest....but i can show you some....*LOL*
__________________
"Horsepower is how fast you hit the wall, torque is how far you carry the wall with you." '84 chevy half ton short box 2wd, 67,000 actual miles '03 chevy 1500 HD crew cab 4x4 standard box, 6.0L |
06-19-2007, 10:03 PM | #17 |
paper or plastic?
Join Date: Nov 2002
Location: SW Missouri
Posts: 671
|
Re: New Member
Nice truck. I live a few streets over from you!
__________________
1967 Chevy SWB 250 http://67-72chevytrucks.com/vboard/s...d.php?t=442157 1977 Chevy SWB 454 No More 454 getting 5.3 http://67-72chevytrucks.com/vboard/s...d.php?t=310518 1977 Stepside Truck of the month winner http://67-72chevytrucks.com/vboard/s...d.php?t=135524 1965 Chevy C10 454 http://67-72chevytrucks.com/vboard/s...d.php?t=731372 1975 Dodge Power Wagon http://67-72chevytrucks.com/vboard/s...=1#post7871388 |
06-19-2007, 10:31 PM | #18 |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: New Member
Nice truck! I love the new wheels...
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
06-20-2007, 08:52 AM | #19 |
Registered User
Join Date: Jun 2007
Location: Springfield Mo.
Posts: 1,086
|
Re: New Member
Small world isn't it! You must have seen my truck sitting on Somerset Dr. Which street do you live on? I like your truck by the way. Do you have any buildup pics on it? We live close enough together that I could come check it out in person sometime! ...Joe
|
06-20-2007, 08:56 AM | #20 |
Registered User
Join Date: Jun 2007
Location: Springfield Mo.
Posts: 1,086
|
Re: New Member
|
06-20-2007, 09:04 AM | #21 |
Registered User
Join Date: Jun 2007
Location: Springfield Mo.
Posts: 1,086
|
Re: New Member
LOL. I know there are worse cases than what I started with and yours has to be the worst that I've seen in quite a while! The midwest loves the road salt. We wouldn't need so much of it if the people that can't drive on dry roads let alone snow and ice would just stay home when the weather is bad! ...Joe
|
06-20-2007, 09:15 AM | #22 | |
Registered User
Join Date: Jun 2007
Location: Springfield Mo.
Posts: 1,086
|
Re: New Member
Quote:
|
|
06-21-2007, 12:04 PM | #23 |
THE VILLIAGE IDIOT
Join Date: Nov 2006
Location: Tooele, Utah
Posts: 1,405
|
Re: New Member
nice truck...welcome to the boards.....
lurch,,i think you done lost part of your bed...looks like one my dad bought,,it was bondoed up,,but after about 6 months of driving,,it was flapping in the wind..
__________________
honestly honey,,i have no idea how that truck got here. |
06-21-2007, 03:44 PM | #24 |
Registered User
Join Date: Jun 2007
Location: Springfield Mo.
Posts: 1,086
|
Re: New Member
I bought some parts for my truck and this truck came with them. It's a 1976 with an 83 body. It was purchased from an old man that bought it brand new in 1976. It rusted out on him and he intended to restore it after he retired from Roadway but decided not to after it sat for 10 years. He had sat the cab and bed on but didn't bolt them down. I put new cab bushings on it, new inner fenders, a set of good used GM fenders and core support that I had sitting here at my house, and the hood that I took off of my 86. The grille and headlight doors are from a 1982 that I bought at a swap meet for $10. It came with a front bumper which I had not bolted on yet. This is what it looked like after I started bolting it all back together.
It came with a complete brand new unassembled 1991 Blazer front clip. This sheetmetal is all brand new GM so I put it aside for use on my 86 later on. It also came with a freshly built 350 that only had 1,500 miles on it, so I'm told. He said that the guy that built it works for O'Reilly Automotive and built it for his own truck, decided that it wasn't what he wanted and put a 454 in it's place so the old man bought it for this truck. Again, I have this engine sitting in my garage on my engine stand awaiting installation into my 86. This truck has a 350 TH350 203 fulltime transfer case with a part time conversion kit, Dana 44 front axle, 12 bolt rear with factory limited slip and 3.73 gears. I turned the motor over by hand and it's not stuck which shocked me because it's been sitting since 1993. I'm hoping that I can get the old thing started up and get the brakes up so that it can be trailered home. Still not sure where I'm going to put it once I get it here because they have city ordinances and all about old vehicles here. I was just going to part this old truck out but just couldn't do it. I don't want to do away with yet another 73-87 if I can help it. It may be another project truck for me in the future since it is pretty solid and I still have a lot of parts that I can put on it. ...Joe |
06-21-2007, 04:55 PM | #25 | |
paper or plastic?
Join Date: Nov 2002
Location: SW Missouri
Posts: 671
|
Re: New Member
Quote:
__________________
1967 Chevy SWB 250 http://67-72chevytrucks.com/vboard/s...d.php?t=442157 1977 Chevy SWB 454 No More 454 getting 5.3 http://67-72chevytrucks.com/vboard/s...d.php?t=310518 1977 Stepside Truck of the month winner http://67-72chevytrucks.com/vboard/s...d.php?t=135524 1965 Chevy C10 454 http://67-72chevytrucks.com/vboard/s...d.php?t=731372 1975 Dodge Power Wagon http://67-72chevytrucks.com/vboard/s...=1#post7871388 |
|
Bookmarks |
|
|