looking for some 4" front packs, etc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Fast68Chevy* · 09-19-2002, 01:48 AM

anyone got any they ended up not using on their truck- or replaced with 6" or more- and would mail to 62656 zip ?

* i have a good '85 350 and good 14 bolt FF axle and good dana 60 4.56 posi FF axle and good CH465 parting outs or wholes and a working and clean '74 chevy tach dash and other goodies also if maybe there is a possibility of some kind of trade or partial trade, too.

also trade anything for anything i can use to help lift a 73-up 4x4, or aything else cool for same like drivers door and cab, fenders, body mount/lift kit, etc.

thanks
Randy
217 735 3230

chevy68388 · 09-19-2002, 11:20 PM

im taking off my 4 inch lift this week end its for a 87 gmc high seirra got to 6 inch but the hole lift goes no just the front springs
im wanting like 175 for the kit but if u had a 3inch body lift that has every thing and u paid s@h we could deal o and the 175 price tag does not include s@h

*Fast68Chevy* · 09-20-2002, 12:16 PM

dont need rear one, ill keep this in mind though,

thanks

chevy68388 · 09-20-2002, 01:33 PM

the rear isnt spring i forgot to say its blocks

chevy68388 · 09-20-2002, 01:36 PM

also in your profile i thought i read that u need a front drive shaft i have one that came out a blazer that had a 350th and a np203 in it

chevy68388 · 09-21-2002, 12:47 AM

ps to any one that looks at this post and would like to buy the lift this it every thing it has with it front lift spring 4 inch rear blocks no need for shims there bilt in to the block its trailmaster has all 8 u bolts and all16 nuts u will need washers but for 175 i dont think thats badit also has the pitman arm

*Fast68Chevy* · 09-21-2002, 02:52 AM

im 90% sure ive located a frotn shaft that will work, but for the hay of it whats overall fully extended length of the one you have ?

thanks

chevy68388 · 09-21-2002, 01:50 PM

im not sure but i will check it out in the next few days its not at my house its in a stogare unit

09-19-2002, 01:48 AM	#1
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	looking for some 4" front packs, etc anyone got any they ended up not using on their truck- or replaced with 6" or more- and would mail to 62656 zip ? * i have a good '85 350 and good 14 bolt FF axle and good dana 60 4.56 posi FF axle and good CH465 parting outs or wholes and a working and clean '74 chevy tach dash and other goodies also if maybe there is a possibility of some kind of trade or partial trade, too. also trade anything for anything i can use to help lift a 73-up 4x4, or aything else cool for same like drivers door and cab, fenders, body mount/lift kit, etc. thanks Randy 217 735 3230

09-19-2002, 11:20 PM	#2
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	im taking off my 4 inch lift this week end its for a 87 gmc high seirra got to 6 inch but the hole lift goes no just the front springs im wanting like 175 for the kit but if u had a 3inch body lift that has every thing and u paid s@h we could deal o and the 175 price tag does not include s@h __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

09-20-2002, 01:33 PM	#4
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	the rear isnt spring i forgot to say its blocks __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

09-20-2002, 01:36 PM	#5
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	also in your profile i thought i read that u need a front drive shaft i have one that came out a blazer that had a 350th and a np203 in it __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

09-21-2002, 12:47 AM	#6
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	ps to any one that looks at this post and would like to buy the lift this it every thing it has with it front lift spring 4 inch rear blocks no need for shims there bilt in to the block its trailmaster has all 8 u bolts and all16 nuts u will need washers but for 175 i dont think thats badit also has the pitman arm __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s

09-20-2002, 12:16 PM	#3
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	dont need rear one, ill keep this in mind though, thanks

09-21-2002, 02:52 AM	#7
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	im 90% sure ive located a frotn shaft that will work, but for the hay of it whats overall fully extended length of the one you have ? thanks

09-21-2002, 01:50 PM	#8
chevy68388 king $h!t Join Date: Jan 2002 Location: spring valley/ohio/usa Posts: 416	im not sure but i will check it out in the next few days its not at my house its in a stogare unit __________________ j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.