possible to turn a regular bed into a wood bed? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dropt72Shortbed · 09-19-2002, 02:40 AM

i love the look of the wood beds. im gonna bag mine so im going to have to raise the bed floor up 3 or 4" so i dont have to cut it for the pumpkin but i really want to add the wood to the bed. is this possible?

**Tim Christian** · 09-19-2002, 05:59 AM

Yes, You would have to change the front bed panel and would need the bed crossmembers for wood.

MOTHERTRUCKERS · 09-19-2002, 10:53 AM

Raising the bed floor 3-4"would require welding an angle lip on the front bed panel and side panels 3-4" higher,fabricated crossmembers 3-4" taller, cut down or aftermarket wheel tubs and a fabricated rear sill 3-4" taller. Any good sheetmetal shop in your area can make the pieces for you. We have 1 set of 4" taller crossmembers and a rear sill in stock. Our rear sill is 1/4" forward at the top so you can notch the front of the bedwood to fit the front panel inset. We have done 4 trucks in the past year like this and they really catch attention at shows.

Dropt72Shortbed · 09-19-2002, 11:04 AM

Quote:

Originally posted by MOTHERTRUCKERS
Raising the bed floor 3-4"would require welding an angle lip on the front bed panel and side panels 3-4" higher,fabricated crossmembers 3-4" taller, cut down or aftermarket wheel tubs and a fabricated rear sill 3-4" taller. Any good sheetmetal shop in your area can make the pieces for you. We have 1 set of 4" taller crossmembers and a rear sill in stock. Our rear sill is 1/4" forward at the top so you can notch the front of the bedwood to fit the front panel inset. We have done 4 trucks in the past year like this and they really catch attention at shows.

could you P.M. me with a price or a way you get a hold of you?

thanks.

MOTHERTRUCKERS · 09-19-2002, 11:20 AM

Call toll free 1-866-755-6772 or e-mail motrucker@prodigy.net. For some reason my pm is not working it says it is full but I have deleted all the old posts ?

RodC · 09-19-2002, 01:03 PM

I have seen the lip that you can add to your existing front panel to convert it to Wood bed. I think Chevy Duty carries it.

**D.PASSMORE** · 09-19-2002, 10:50 PM

Drop-
ED at Mothertruckers will give you the best price and excellent info on setting up your project. not to many companies will go to that length. your choice.

09-19-2002, 02:40 AM	#1
Dropt72Shortbed Registered User Join Date: May 2002 Location: Huntington Beach CA Posts: 678	possible to turn a regular bed into a wood bed? i love the look of the wood beds. im gonna bag mine so im going to have to raise the bed floor up 3 or 4" so i dont have to cut it for the pumpkin but i really want to add the wood to the bed. is this possible?

09-19-2002, 10:53 AM	#3
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Raising the bed floor 3-4"would require welding an angle lip on the front bed panel and side panels 3-4" higher,fabricated crossmembers 3-4" taller, cut down or aftermarket wheel tubs and a fabricated rear sill 3-4" taller. Any good sheetmetal shop in your area can make the pieces for you. We have 1 set of 4" taller crossmembers and a rear sill in stock. Our rear sill is 1/4" forward at the top so you can notch the front of the bedwood to fit the front panel inset. We have done 4 trucks in the past year like this and they really catch attention at shows. __________________ Rest in Peace Ed. Thanks for all the good times.

09-19-2002, 11:20 AM	#5
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Call toll free 1-866-755-6772 or e-mail motrucker@prodigy.net. For some reason my pm is not working it says it is full but I have deleted all the old posts ? __________________ Rest in Peace Ed. Thanks for all the good times.

09-19-2002, 01:03 PM	#6
RodC Registered User Join Date: Nov 2001 Location: Fairmont WV Posts: 304	I have seen the lip that you can add to your existing front panel to convert it to Wood bed. I think Chevy Duty carries it. __________________ Rod Childers '71 C10 Stepside

09-19-2002, 10:50 PM	#7
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,060	Mothertruckers parts Drop- ED at Mothertruckers will give you the best price and excellent info on setting up your project. not to many companies will go to that length. your choice. __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

09-19-2002, 05:59 AM	#2
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,389	Yes, You would have to change the front bed panel and would need the bed crossmembers for wood.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.