lowering question............. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*project 67 sub* · 08-11-2007, 10:15 PM

does anybody know of a company, or any imparticular person on here that makes, or can make 3" lowering blocks for the 60-72 chevy trucks, and how much are they? or how much would someone charge to make me some? i need to get a set for my 67 burb.
p.s. thanks in advance

royo · 08-12-2007, 07:16 PM

why would you want 3 in i know they make a 2 in

*project 67 sub* · 08-12-2007, 08:07 PM

Quote:

Originally Posted by royo

why would you want 3 in i know they make a 2 in

because i want to be able to get the back as low as i can until i can get a
4-link to run with the off the front of the axle airbag brackets and bags

royo · 08-12-2007, 09:58 PM

I guess you could stack a 2 in and a 1 in block also get a new u bolt made at a spring shop but have you measured the distance between the trailing armand the bottem of the brake drum and how close it will be to the ground that is if it is coil spring rear if it is leaf spring a block can be bought anywhere

*project 67 sub* · 08-12-2007, 11:24 PM

yah it is a coil spring rearend, im going to be runnin 20's anyways so it doesn't matter to much how low the trailing arms will be compared go the bottom of the drum. because this will only be a temporary setup untill i can get some money for a 4-link(possibly a kp components bolt in unit). yah i guess i could always stack a 2 inch and a 1 inch block together for now and have my local spring shop make me a new set of ubolts.

knightlife · 08-16-2007, 05:42 AM

there are 1,2, and 3...
here:
http://www.andysautosport.com/chevro...kits/belltech/

*project 67 sub* · 08-16-2007, 02:48 PM

Quote:

Originally Posted by knightlife

there are 1,2, and 3...
here:
http://www.andysautosport.com/chevro...kits/belltech/

knightlife:
thanks for the link, but those wont work because i have a coil spring rearend

08-11-2007, 10:15 PM	#1
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	lowering question............. does anybody know of a company, or any imparticular person on here that makes, or can make 3" lowering blocks for the 60-72 chevy trucks, and how much are they? or how much would someone charge to make me some? i need to get a set for my 67 burb. p.s. thanks in advance

08-12-2007, 07:16 PM	#2
royo Registered User Join Date: Feb 2007 Location: knoxville tn Posts: 1,013	Re: lowering question............. why would you want 3 in i know they make a 2 in __________________ nickle and dime

08-12-2007, 09:58 PM	#4
royo Registered User Join Date: Feb 2007 Location: knoxville tn Posts: 1,013	Re: lowering question............. I guess you could stack a 2 in and a 1 in block also get a new u bolt made at a spring shop but have you measured the distance between the trailing armand the bottem of the brake drum and how close it will be to the ground that is if it is coil spring rear if it is leaf spring a block can be bought anywhere __________________ nickle and dime

08-12-2007, 11:24 PM	#5
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: lowering question............. yah it is a coil spring rearend, im going to be runnin 20's anyways so it doesn't matter to much how low the trailing arms will be compared go the bottom of the drum. because this will only be a temporary setup untill i can get some money for a 4-link(possibly a kp components bolt in unit). yah i guess i could always stack a 2 inch and a 1 inch block together for now and have my local spring shop make me a new set of ubolts.

08-16-2007, 05:42 AM	#6
knightlife Dark Heart Motorsports Join Date: Apr 2007 Location: 29404 DKFX Posts: 683	Re: lowering question............. there are 1,2, and 3... here: http://www.andysautosport.com/chevro...kits/belltech/ __________________ How Deep Can YOU Bleed..? 1985 Chevy Blazer K5- 6.2 N/A, 400 turbo trans CUCV, 12v converted... a new chapter 2005 GMC Sierra Crew Cab 6.0 powwwaa!!! custom jumpseat install w/ captain seats, Hypertech tuner, MSD Blaster Coils, CB and twin antenna's, all electric interior, touch screen in dash. custom center console, with jump seat replacing original console. 1500 HD! Last edited by knightlife; 08-16-2007 at 05:43 AM. Reason: they make a three, and Im retarded...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.