Vacuum Gauge including rear gauge plate - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70c10 · 10-05-2007, 08:07 PM

This appears to be a fairly new repro vacuum gauge and backing plate. I bought this at a swap meet today and it's sold as-is. There are a few scratches on the gauge face and some minor rust on the plate. The needle has a chip of orange paint missing at the very bottom that would not be seen when installed. I don't know anything about vac gauges because I install clocks in that spot

$40 delivered anywhere in the U.S.A. Please respond in thread to avoid confusion. Paypal preferred.

Huck · 10-05-2007, 08:11 PM

Jim, I'll take that vacuum gauge---I just picked up a "air pressure" tach gauge setup so---let me know how I can pay you. Huck

70c10 · 10-05-2007, 08:11 PM

Thanks Huck. I prefer Paypal but can take a Postal Money Order also. PM sent

Dstrm1990 · 10-05-2007, 09:29 PM

Hate to jump in, but do you have any pics of the clock installs you've done. I thought that was a great idea awhile back but have never seen what can be done.

Daniel

10-05-2007, 08:07 PM	#1
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Vacuum Gauge including rear gauge plate This appears to be a fairly new repro vacuum gauge and backing plate. I bought this at a swap meet today and it's sold as-is. There are a few scratches on the gauge face and some minor rust on the plate. The needle has a chip of orange paint missing at the very bottom that would not be seen when installed. I don't know anything about vac gauges because I install clocks in that spot$40 delivered anywhere in the U.S.A. Please respond in thread to avoid confusion. Paypal preferred. Attached Images __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

10-05-2007, 08:11 PM	#2
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Re: Vacuum Gauge including rear gauge plate Jim, I'll take that vacuum gauge---I just picked up a "air pressure" tach gauge setup so---let me know how I can pay you. Huck

10-05-2007, 08:11 PM	#3
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: Vacuum Gauge including rear gauge plate Thanks Huck. I prefer Paypal but can take a Postal Money Order also. PM sent __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads Last edited by 70c10; 10-05-2007 at 08:19 PM.

10-05-2007, 09:29 PM	#4
Dstrm1990 Junior Member Join Date: Jun 2007 Location: Keller, Texas Posts: 142	Re: Vacuum Gauge including rear gauge plate Hate to jump in, but do you have any pics of the clock installs you've done. I thought that was a great idea awhile back but have never seen what can be done. Daniel



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.